compiled on Dec 4 2019 12:34:57 X-Plane started on Sat Jul 4 22:12:50 2020
This log file is generated automatically by Laminar Research applications and
contains diagnostics about your graphics hardware, installation, and any error conditions. If you need to contact tech support or file a bug, please send us this file. NOTE: this file is rewritten every time you start ANY of your X-System applications.
Windows 10.0 (build 18363/2)
This is a 64-bit version of Windows. CPU type: 8664 Physical Memory (total for computer): 8482041856 Maximum Virtual Memory (for X-Plane only): 140737488224256 CPU 0: Intel(R) Core(TM) i7-4600M CPU @ 2.90GHz Speed (mhz): 2893 CPU 0: Intel(R) Core(TM) i7-4600M CPU @ 2.90GHz Speed (mhz): 2893 CPU 0: Intel(R) Core(TM) i7-4600M CPU @ 2.90GHz Speed (mhz): 2893 CPU 0: Intel(R) Core(TM) i7-4600M CPU @ 2.90GHz Speed (mhz): 2893
X-System folder:'C:\Users/Fernando/Desktop/X-Plane 11/', case sensitive=0
Initializing off screen memory complete. 0:00:00.000 D/HID: HID Bridge Running 0:00:04.117 I/NAVT: Airspaces are done loading async... 0:00:06.895 E/APT: Found a bad frequency for the Tower controller at LEZG: 139.300. It should be between 118.000 and 136.990. 0:00:06.895 E/APT: The airport LEZG (Zaragoza) has lost some controllers due to bad frequencies. Each controller needs at least one frequency in the range of 118.00 to 136.990 mhz. 0:00:06.895 E/APT: We found a solitary GND controller at LEZG (Zaragoza). Where's his tower controller? 0:00:06.895 E/APT: Found a bad frequency for the Tower controller at 6K4: 115.400. It should be between 118.000 and 136.990. 0:00:06.895 E/APT: The airport 6K4 (FAIRVIEW MUNI) has lost some controllers due to bad frequencies. Each controller needs at least one frequency in the range of 118.00 to 136.990 mhz. 0:00:06.895 E/APT: Found a bad frequency for the CTAF controller at VOTV: 112.850. It should be between 118.000 and 136.990. 0:00:06.895 E/APT: Found a bad frequency for the Center controller at RJAW: 138.300. It should be between 118.000 and 136.990. 0:00:06.895 E/APT: Found a bad frequency for the Approach controller at RJAW: 138.300. It should be between 118.000 and 136.990. 0:00:06.895 E/APT: Found a bad frequency for the CTAF controller at LSXG: 159.670. It should be between 118.000 and 136.990. 0:00:06.895 E/APT: Found a bad frequency for the CTAF controller at LSXG: 159.200. It should be between 118.000 and 136.990. 0:00:06.895 E/APT: Found a bad frequency for the CTAF controller at LFBG: 142.450. It should be between 118.000 and 136.990. 0:00:06.895 E/APT: Ramp start "Padrão" is located too far away (more than 6 km) from the airport NFMO 0:00:06.895 E/APT: Found a bad frequency for the Approach controller at PAUN: 137.500. It should be between 118.000 and 136.990. 0:00:06.895 E/APT: Found a bad frequency for the CTAF controller at KMGJ: 116.100. It should be between 118.000 and 136.990. 0:00:06.895 E/APT: Found a bad frequency for the CTAF controller at YSHR: 114.400. It should be between 118.000 and 136.990. 0:00:06.895 E/APT: Found a bad frequency for the Center controller at MMLP: 112.300. It should be between 118.000 and 136.990. 0:00:06.895 E/APT: Found a bad frequency for the CTAF controller at XCAW4: 158.760. It should be between 118.000 and 136.990. 0:00:06.895 E/APT: Found a bad frequency for the CTAF controller at YSPI: 116.900. It should be between 118.000 and 136.990. 0:00:06.895 E/APT: Found a bad frequency for the CTAF controller at YMVM: 113.200. It should be between 118.000 and 136.990. 0:00:06.895 E/APT: Found a bad frequency for the Approach controller at KSAV: 109.900. It should be between 118.000 and 136.990. 0:00:06.895 E/APT: Found a bad frequency for the Approach controller at KSAV: 111.900. It should be between 118.000 and 136.990. 0:00:06.895 E/APT: Found a bad frequency for the Tower controller at LEBZ: 139.300. It should be between 118.000 and 136.990. 0:00:06.895 E/APT: The airport LEBZ (Badajoz- Talavera La Real) has lost some controllers due to bad frequencies. Each controller needs at least one frequency in the range of 118.00 to 136.990 mhz. 0:00:06.895 E/APT: Found a bad frequency for the CTAF controller at YGFN: 112.400. It should be between 118.000 and 136.990. 0:00:06.895 E/APT: Found a bad frequency for the Tower controller at LELC: 139.300. It should be between 118.000 and 136.990. 0:00:06.895 E/APT: The airport LELC (Murcia San Javier) has lost some controllers due to bad frequencies. Each controller needs at least one frequency in the range of 118.00 to 136.990 mhz. 0:00:06.895 E/APT: We found a solitary GND controller at LELC (Murcia San Javier). Where's his tower controller? 0:00:06.895 E/APT: Found a bad frequency for the Approach controller at LPOT: 144.000. It should be between 118.000 and 136.990. 0:00:06.895 E/APT: Found a bad frequency for the Tower controller at KTCM: 109.600. It should be between 118.000 and 136.990. 0:00:06.895 E/APT: Ramp start "Padrão" is located too far away (more than 6 km) from the airport NFFR 0:00:06.895 E/APT: Found a bad frequency for the Tower controller at SBFL: 112.800. It should be between 118.000 and 136.990. 0:00:06.895 I/NAVT: NavData is done loading async... 0:00:06.895 I/NAVT: Fixes are done loading async... 0:00:06.895 I/NAVT: Navaids are done loading async... 0:00:06.895 I/REN: Setting texture resolution read from prefs as 4 0:00:06.895 I/NAVT: Airways are done loading async... 0:00:06.895 I/NAVT: All navt data is done loading async... 0:00:06.895 I/REN: Setting |draw view indicator defaulted to 1. 0:00:06.895 I/REN: Setting |dim under high G-load or hypoxia defaulted to 1. 0:00:06.895 I/REN: Setting |draw hi-res planet textures from orbit defaulted to 1. 0:00:06.895 I/REN: Setting |draw forest fires and balloons defaulted to 0. 0:00:06.895 I/REN: Setting |draw birds and deer in nice weather defaulted to 1. 0:00:06.895 I/REN: Setting |draw aircraft carriers and frigates defaulted to 1. 0:00:06.895 I/REN: Setting |draw Aurora Borealis defaulted to 0. 0:00:06.895 I/REN: Setting |runways follow terrain contours defaulted to 1. 0:00:06.895 I/REN: Setting |3-d drawing detail defaulted to 1. 0:00:06.895 I/REN: Setting |water reflection detail defaulted to 0. 0:00:06.895 I/REN: Setting |draw parked aircraft at airports defaulted to 0. 0:00:06.895 I/REN: Setting compress textures to save VRAM defaulted to 1. 0:00:06.895 I/REN: Setting |Effects defaulted to 2. 0:00:06.895 I/REN: Setting |3-d shadows defaulted to 0. 0:00:06.895 I/REN: Setting |HDR anti-aliasing defaulted to 0. 0:00:06.895 I/REN: Setting |draw volumetric fog defaulted to 1. 0:00:06.895 I/REN: Setting |draw per pixel lighting defaulted to 1. 0:00:06.895 I/REN: Setting |atmospheric scattering defaulted to 1. 0:00:33.062 I/NET: OS has RFC 4941 Privacy Extensions for IPv6 *disabled*, using PERMANENT IPv6 addresses 0:00:33.062 I/NET: Ethernet (Intel(R) Ethernet Connection I217-LM) 192.168.0.102 0:00:33.062 I/NET: Npcap Loopback Adapter (Npcap Loopback Adapter) 169.254.97.82 0:00:33.062 I/NET: Ethernet (Intel(R) Ethernet Connection I217-LM) fe80::2dc5:d01a:6006:a86b 0:00:33.062 I/NET: Npcap Loopback Adapter (Npcap Loopback Adapter) fe80::a197:7496:fb29:6152 0:00:33.062 I/NET: (RakNet) Init: Successful! 0:00:33.762 D/STM: Transitioning from state state_InitialLoading to state_QuickFlightWizard 0:00:33.762 I/WIN: Showing subscreen Main Menu 0:00:33.762 I/OVR: User is entering the holodeck. 0:00:33.762 I/WIN: Opened window Primary V11 UI 0:00:36.140 I/MIS: Handling Event: mission_event_load 0:00:36.140 I/MIS: Changing State From: mission_state_unloaded to mission_state_loading 0:00:36.140 I/MIS: Starting mission: Noções básicas do X-Plane 0:00:36.153 W/ATC: Found overlapping airports with overlapping controller freqs at KCEA and KIAB! 0:00:36.153 W/ATC: Found overlapping airports with overlapping controller freqs at WSAC and WSSS! 0:00:36.153 W/ATC: Found overlapping airports with overlapping controller freqs at RJCJ and RJCC! 0:00:36.153 W/ATC: Found overlapping airports with overlapping controller freqs at WIPT and WIEE! 0:00:36.153 W/ATC: Found overlapping airports with overlapping controller freqs at KNSE and KNDZ! 0:00:36.153 W/ATC: Rewrote KAHN atc_ControllerRole_Del's freq: 133950 to 118000 for being in conflict! 0:00:36.153 W/ATC: Rewrote KCEA atc_ControllerRole_Twr's freq: 127250 to 118025 for being in conflict! 0:00:36.153 W/ATC: Rewrote WSAC atc_ControllerRole_Twr's freq: 118250 to 118000 for being in conflict! 0:00:36.153 W/ATC: Rewrote RJCJ atc_ControllerRole_Del's freq: 121900 to 118000 for being in conflict! 0:00:36.153 W/ATC: Rewrote WIPT atc_ControllerRole_Twr's freq: 118300 to 118000 for being in conflict! 0:00:36.153 W/ATC: Rewrote KNSE atc_ControllerRole_Twr's freq: 121400 to 118000 for being in conflict! 0:00:44.404 D/STM: Transitioning from state state_QuickFlightWizard to state_NormalLoading 0:00:44.404 I/ACF: Loading airplane number 0 with Aircraft/Laminar Research/Cessna 172SP/Cessna_172SP.acf Fetching plugins for C:\Users/Fernando/Desktop/X-Plane 11/Aircraft/Laminar Research/Cessna 172SP/plugins
0:00:47.059 I/SND: This aircraft is using FMOD in PARTIAL mode. 0:00:47.059 I/FLT: Init dat_p0 type:loc_specify_lle lat:21.315000 lon:-157.915000 ele(ft):6000.000206 psi:0.000000 spd(kts):100.000001 0:01:00.282 I/DSF: Warning for missing scenery file: +20-160 0:01:00.282 I/DSF: Warning for missing scenery file: +22-158 0:01:00.282 I/DSF: Warning for missing scenery file: +22-157 0:01:00.282 I/SCN: DSF load time: 11488903 for file Custom Scenery/Global Airports/Earth nav data/+20-160/+22-160.dsf (0 tris, 0 skipped for 0.0 m^2) 0:01:00.282 I/SCN: DSF load time: 36154037 for file Global Scenery/X-Plane 11 Demo Areas/Earth nav data/+20-160/+20-158.dsf (4659 tris, 0 skipped for 0.0 m^2) 0:01:00.282 I/DSF: Warning for missing scenery file: +20-159 0:01:00.282 I/SCN: DSF load time: 13009140 for file Custom Scenery/Global Airports/Earth nav data/+20-160/+20-157.dsf (0 tris, 0 skipped for 0.0 m^2) 0:01:00.282 I/SCN: DSF load time: 40212446 for file Global Scenery/X-Plane 11 Demo Areas/Earth nav data/+20-160/+22-160.dsf (81759 tris, 0 skipped for 0.0 m^2) 0:01:00.282 I/SCN: DSF load time: 4813200 for file Custom Scenery/Global Airports/Earth nav data/+20-160/+21-160.dsf (0 tris, 0 skipped for 0.0 m^2) 0:01:00.282 I/SCN: DSF load time: 3841839 for file Global Scenery/X-Plane 11 Demo Areas/Earth nav data/+20-160/+21-160.dsf (42559 tris, 0 skipped for 0.0 m^2) 0:01:00.282 I/SCN: DSF load time: 833159 for file Custom Scenery/Global Airports/Earth nav data/+20-160/+21-159.dsf (0 tris, 0 skipped for 0.0 m^2) 0:01:00.282 I/SCN: DSF load time: 11255288 for file Global Scenery/X-Plane 11 Demo Areas/Earth nav data/+20-160/+20-157.dsf (94749 tris, 5 skipped for -18.2 m^2) 0:01:00.282 I/SCN: DSF load time: 425473 for file Custom Scenery/Global Airports/Earth nav data/+20-160/+21-157.dsf (0 tris, 0 skipped for 0.0 m^2) 0:01:00.282 I/SCN: DSF load time: 2573769 for file Global Scenery/X-Plane 11 Demo Areas/Earth nav data/+20-160/+21-157.dsf (55181 tris, 1 skipped for -1537.6 m^2) 0:01:00.282 I/SCN: DSF load time: 4030098 for file Global Scenery/X-Plane 11 Demo Areas/Earth nav data/+20-160/+21-159.dsf (56198 tris, 0 skipped for 0.0 m^2) 0:01:00.282 I/SCN: DSF load time: 7639115 for file Custom Scenery/Global Airports/Earth nav data/+20-160/+21-158.dsf (0 tris, 0 skipped for 0.0 m^2) 0:01:00.282 I/SCN: DSF load time: 3189676 for file Global Scenery/X-Plane 11 Demo Areas/Earth nav data/+20-160/+21-158.dsf (78782 tris, 0 skipped for 0.0 m^2) 0:01:00.282 I/DSF: Warning for missing scenery file: +22-159 0:02:31.043 I/OVR: Reading VR conf file: Aircraft/Laminar Research/Cessna 172SP/Cessna_172SP_vrconfig.txt 0:02:31.043 D/STM: Transitioning from state state_NormalLoading to state_Normal 0:02:31.043 I/MIS: Handling Event: mission_event_dsf_loaded 0:02:31.043 I/MIS: Changing State From: mission_state_loading to mission_state_loaded_ready 0:02:31.043 I/MIS: Handling Event: mission_event_pregame_beginning 0:02:31.043 I/MIS: Changing State From: mission_state_loaded_ready to mission_state_running_pregame 0:02:31.043 D/ACT: Start Mission 0:02:31.043 I/MIS: Handling Event: mission_event_pregame_ending 0:02:31.043 I/MIS: Changing State From: mission_state_running_pregame to mission_state_pregame_done 0:02:31.043 I/MIS: Handling Event: mission_event_mission_start 0:02:31.043 I/MIS: Changing State From: mission_state_pregame_done to mission_state_running_mission 0:02:31.043 D/ACT: Starting Wizard: Resources/wizards/intro.txt 0:02:31.043 I/WIZ: Loaded tutorial file Resources/wizards/intro.txt 0:02:31.043 I/OVR: User is leaving the holodeck. 0:02:31.459 I/WIZ: Soloing ALL 0:02:31.459 I/WIZ: Setting dataref sim/cockpit2/engine/actuators/throttle_ratio_all to 0.5 0:02:31.459 I/WIZ: Setting dataref sim/cockpit2/autopilot/sync_hold_roll_deg to 0.0 0:02:31.459 I/WIZ: Setting dataref sim/cockpit2/autopilot/sync_hold_pitch_deg to 0.0 0:02:31.459 I/WIZ: Setting dataref sim/time/ground_speed to 0.0 0:02:31.459 I/WIZ: Setting dataref iphone/settings/training_wheels to 1.0 0:02:31.459 I/WIZ: Pressing command : sim/autopilot/servos_on 0:02:31.459 I/WIZ: Pressing command : sim/autopilot/wing_leveler 0:02:31.459 I/WIZ: Pressing command : sim/autopilot/pitch_sync 0:02:45.421 I/WIN: Opened window menu bar 0:03:15.829 I/WIZ: Showing blocking message : Bem vindo ao X-Plane 11! Este é um tour rápido para mostrar a você. 0:03:35.244 I/WIZ: Showing blocking message : Você pode ignorar essa mensagem pressionando a tecla Enter ou clicando em "Continuar". 0:03:43.380 I/WIZ: Showing blocking message : Vamos falar sobre como controlar o avião. 0:03:44.908 I/WIZ: Pressing command : sim/autopilot/heading_none 0:03:44.908 I/WIZ: Un-Soloing 'ROLL' 0:03:44.908 I/WIZ: Showing blocking message : Você está usando um mouse para voar. Clique com o mouse perto do centro da tela para “agarrar” o manche (os controles de vôo). Clique uma segunda vez se quiser liberar os controles. 0:04:04.773 I/WIZ: Showing blocking message : Mova o [control] para a esquerda ou para a direita para rolar o avião nessa direção. 0:04:09.083 I/WIZ: Showing point message : Mova o [control] para a esquerda para fazer o avião ir para a esquerda! 0:04:27.391 I/WIZ: Showing point message : Mova o [control] para a direita para fazer o avião ir para a direita! 0:04:45.956 I/WIZ: Showing blocking message : Bom trabalho! Continue praticando seus turnos o quanto quiser. 0:05:02.357 I/WIZ: Showing blocking message : Agora, vamos praticar o uso do [control] para controlar o nariz do avião. 0:05:04.845 I/WIZ: Pressing command : sim/autopilot/altitude_none 0:05:04.845 I/WIZ: Un-Soloing 'PITCH' 0:05:04.845 I/WIZ: Showing point message : Mova o ponteiro do mouse em direção à parte inferior da caixa para levantar o nariz. 0:05:04.922 I/WIZ: Showing point message : Mova o ponteiro para o topo da caixa para abaixar o nariz. 0:05:09.329 I/WIZ: Showing blocking message : Muito bem! Pratique levando e abaixando o nariz até que você esteja pronto para continuar. 0:05:25.728 I/WIZ: Pressing command : sim/autopilot/wing_leveler 0:05:25.728 I/WIZ: Setting dataref sim/cockpit2/autopilot/sync_hold_pitch_deg to 0.0 0:05:25.728 I/WIZ: Pressing command : sim/autopilot/pitch_sync 0:05:25.728 I/WIZ: Showing blocking message : Eu voarei no avião por um momento enquanto aprendemos alguns outros controles. 0:05:30.164 I/WIZ: Showing blocking message : A manete controla a potência do seu motor, assim como o pedal do acelerador de um carro. 0:05:34.410 I/WIZ: Command throttle_down is bound to a key 0:05:34.410 I/WIZ: Command throttle_up is bound to a key 0:05:34.410 I/WIZ: Showing blocking message : Você pode usar o teclado para controlar a manete de potência. A tecla "[throttle_up]" aumenta a potência. 0:05:36.308 I/WIZ: Showing blocking message : Enquanto a tecla "[throttle_down]" diminui. 0:05:37.759 I/WIZ: Showing point message : Colocar manete toda a frente para ter potência maxima. 0:05:37.898 I/WIZ: Un-Soloing 'THROTTLE' 0:05:44.821 I/WIZ: Clearing coach marks 0:05:44.821 I/WIZ: Coaching manipulator for dataref sim/cockpit2/gauges/indicators/airspeed_kts_pilot 0:05:44.821 I/WIZ: Showing point message : Esta é a sua velocidade indicada. Você pode ver sua velocidade aumentando desde que você adicionou energia. Diminua a manete de potência até a idle e observe o avião desacelerar novamente. 0:07:32.933 I/WIZ: Clearing coach marks 0:07:35.026 I/WIZ: Showing point message : Bom! Vou definir a potência em 50% para manter o avião se movimentando bem. 0:07:38.197 I/WIZ: Will set dataref sim/cockpit2/engine/actuators/throttle_ratio_all to 0.5 over the next 1.000000 seconds 0:07:39.237 I/WIZ: Setting dataref sim/time/ground_speed to 1.0 0:07:39.237 I/WIZ: Command view_circle is bound to a key 0:07:39.237 I/WIZ: Command view_3d_cockpit is bound to a key 0:07:39.237 I/WIZ: Command backwards is bound to a key 0:07:39.237 I/WIZ: Command forwards is bound to a key 0:07:39.237 I/WIZ: Showing point message : Comandos no teclado podem mudar sua visão. Tente pressionar ‘[view_circle]’ para ir para a visualização Círculo. 0:07:54.519 I/WIZ: Showing blocking message : As teclas de seta permitem que você mova a vista ao redor. 0:07:54.947 I/MIS: Handling Event: mission_event_mission_end_user_wrecked 0:07:54.947 I/MIS: Changing State From: mission_state_running_mission to mission_state_mission_done 0:07:54.947 I/MIS: Ending mission: Noções básicas do X-Plane 0:07:54.947 I/MIS: Handling Event: mission_event_postgame_start 0:07:54.947 I/MIS: Changing State From: mission_state_mission_done to mission_state_running_postgame 0:07:54.947 D/ACT: Ending PostGame 0:07:54.947 I/MIS: Handling Event: mission_event_postgame_ending 0:07:54.947 I/MIS: Changing State From: mission_state_running_postgame to mission_state_postgame_done 0:07:54.947 I/OVR: User is entering the holodeck. 0:07:58.346 I/OVR: User is leaving the holodeck. 0:07:58.346 I/MIS: Handling Event: mission_event_unload_retry 0:07:58.346 I/MIS: Changing State From: mission_state_postgame_done to mission_state_unloaded 0:07:58.346 I/MIS: Handling Event: mission_event_reload 0:07:58.346 I/MIS: Changing State From: mission_state_unloaded to mission_state_reloading 0:07:58.346 I/MIS: Starting mission: Noções básicas do X-Plane 0:07:58.346 I/FLT: Init dat_p0 type:loc_specify_lle lat:21.315000 lon:-157.915000 ele(ft):6000.000206 psi:0.000000 spd(kts):100.000001 0:07:58.854 I/OVR: Reading VR conf file: Aircraft/Laminar Research/Cessna 172SP/Cessna_172SP_vrconfig.txt 0:07:58.854 I/MIS: Handling Event: mission_event_dsf_reloaded 0:07:58.854 I/MIS: Changing State From: mission_state_reloading to mission_state_loaded_ready 0:07:58.854 I/MIS: Handling Event: mission_event_mission_start 0:07:58.854 I/MIS: Changing State From: mission_state_loaded_ready to mission_state_running_mission 0:07:58.854 D/ACT: Starting Wizard: Resources/wizards/intro.txt 0:07:58.854 I/WIZ: Loaded tutorial file Resources/wizards/intro.txt 0:08:00.809 I/WIZ: Soloing ALL 0:08:00.809 I/WIZ: Setting dataref sim/cockpit2/engine/actuators/throttle_ratio_all to 0.5 0:08:00.809 I/WIZ: Setting dataref sim/cockpit2/autopilot/sync_hold_roll_deg to 0.0 0:08:00.809 I/WIZ: Setting dataref sim/cockpit2/autopilot/sync_hold_pitch_deg to 0.0 0:08:00.809 I/WIZ: Setting dataref sim/time/ground_speed to 0.0 0:08:00.809 I/WIZ: Setting dataref iphone/settings/training_wheels to 1.0 0:08:00.809 I/WIZ: Pressing command : sim/autopilot/servos_on 0:08:00.809 I/WIZ: Pressing command : sim/autopilot/wing_leveler 0:08:00.809 I/WIZ: Pressing command : sim/autopilot/pitch_sync 0:08:21.184 I/SIM: Exiting the sim without confirmation 0:08:21.184 I/SIM: Exiting the sim without confirmation 0:08:21.313 D/STM: Transitioning from state state_Normal to state_ShuttingDown 0:08:21.313 D/HID: HID Bridge Shutdown ----- X-Plane has shut down -----