Professional Documents
Culture Documents
com/autocad-exercise-01/
AutoCAD Exercises – 2D
! Tutorial45 " AutoCAD tips
2 AutoCAD
Exercise 00
If you have not
taken the
AutoCAD quiz 00
yet, …
auth.monday.com
1 of 11 2018-02-17, 12:37
AutoCAD Exercises (free eBook) - Tutorial45 http://tutorial45.com/autocad-exercise-01/
The value of A will unveil itself after drawing the part you are to learn
given information about. AutoCAD
The best way to
learn
AutoCADThere
is no such
thing …
AutoCAD
tutorial 12: Move
and Copy
objects …
Moving and
copying are
frequently needed
action when you
work …
AutoCAD
tutorial 17:
Polygon and
SCALE in …
Here are 2 new
Exercise 2 Basic AutoCAD
You can find this same Exercise in the post where we learned commands well to
master. …
how to work with layers in AutoCAD.
2 of 11 2018-02-17, 12:37
AutoCAD Exercises (free eBook) - Tutorial45 http://tutorial45.com/autocad-exercise-01/
Exercise 3
This is an easy one. It was actually first introduced when we
learned how to draw circles and how to trim in AutoCAD.
Exercise 4
This is a cool exercise that will help you think a little bit. All
dimensions are given!
While you are it, I believe you should check this AutoCAD quiz.
3 of 11 2018-02-17, 12:37
AutoCAD Exercises (free eBook) - Tutorial45 http://tutorial45.com/autocad-exercise-01/
Exercise 5
This exercise first appeared in this AutoCAD practice exercise.
Exercise 6
If you were able to complete previous exercises, this one could
be boring nevertheless it is not totally unnecessary to have it on
the list. I should have put it above 😉
4 of 11 2018-02-17, 12:37
AutoCAD Exercises (free eBook) - Tutorial45 http://tutorial45.com/autocad-exercise-01/
Exercise 7
Exercise 8
5 of 11 2018-02-17, 12:37
AutoCAD Exercises (free eBook) - Tutorial45 http://tutorial45.com/autocad-exercise-01/
Exercise 9
Exercise 10
6 of 11 2018-02-17, 12:37
AutoCAD Exercises (free eBook) - Tutorial45 http://tutorial45.com/autocad-exercise-01/
Exercise 11
The following figure is a 2D figure and where all data are being
provided. We should be able to replicate this with ease.
7 of 11 2018-02-17, 12:37
AutoCAD Exercises (free eBook) - Tutorial45 http://tutorial45.com/autocad-exercise-01/
Step 2
Draw the second line starting from the right end of the previously
drawn line.
Use @50<-53 to draw it, and you should have the following.
Step 3
Draw a line starting at the left end of the 30 unit line using
@50<-79 (50 of length is arbitrary chosen and the angle 79 is
found by doing 360-90-64-127 – the Sum of angles in any
Quadrilateral is 360 degrees).
Step 4
Draw a line of an arbitrarily chosen length but make sure it forms
64 degrees with the line we have created in Step 2
(You can do this by creating a line aligned with the line with
created in Step 2 and rotating it with 64 degrees
counterclockwise)
8 of 11 2018-02-17, 12:37
AutoCAD Exercises (free eBook) - Tutorial45 http://tutorial45.com/autocad-exercise-01/
Step 5
Create a line on the open side of the quadrilateral from the 2
points such as having the following.
Step 6
Use the Fillet command with R=0 to join those two lines to close
that hole at the bottom of the figure
Hope this has given you a glimpse of it all. Now you have more
than what you need to start playing on your own
Related Posts
9 of 11 2018-02-17, 12:37
AutoCAD Exercises (free eBook) - Tutorial45 http://tutorial45.com/autocad-exercise-01/
10 of 11 2018-02-17, 12:37
AutoCAD Exercises (free eBook) - Tutorial45 http://tutorial45.com/autocad-exercise-01/
11 of 11 2018-02-17, 12:37