Professional Documents
Culture Documents
» » Ergobin
» » Hydraulic Lift Tables
» » Lifters
» » Compac Mobile Lifter
» » Tow Tugs
» » Pallet Trucks
» » Anti-corrosion pallet trucks
» » heavy duty electric pallet truck
» » Skid Handling
» » Quickstak “Smart Stackers”
» » Palift - Spring Loaded Pallet Positioner
» » Heavy duty scissor lift tables
» » Freight / Goods Hoists
» » Conveyor
» » Hydraulic Scissor Lift Tables
» » Fixed Jibs
» » Container Ramps
» » Fork Spreader
» » Pallet Hook
» » Goods Cage
» » Chain Block
» » Air Hoists
» » Girder Clamp
» » Electric Tow Tractors
A B
C E F
2
order details | phone: 1300 363 152
SITECRAFT.COM.AU
LARGE PLATFORM Heavy Duty Scissor Lift Trolley
A
B
Lifting Capacity Max Platform Height Min Platform Height Platform Size Packaging Weight
Model
(kg) (mm) (mm) (mm) (kg)
A 5781009 500 100 400 1525 x 620 175
B 5781010 500 1190 370 1200 x 800 160
*Not pictured
B
A F I
Model Capacity (kg) Minimum Height (mm) Maximum Height (mm) Platform Size (mm) Unit Weight (kg)
A ES30 300 450 940 1010 x 520 140
B ES50 500 450 950 1010 x 520 148
C ES75 750 450 950 1010 x 520 154
D ES100 1000 480 950 1010 x 520 169
E ES30D 300 495 950 1010 x 520 183
F ES50D 500 495 950 1010 x 520 198
G ES80D 800 510 950 1010 x 520 208
H ES50LA 500 440 950 1525 x 620 215
I ES50LB 500 430 950 1200 x 800 220
J ES100L 1000 430 950 1200 x 800 225
*Not pictured
4
order details | phone: 1300 363 152
SITECRAFT.COM.AU
Powerlift Trolley
At the press of a button you can reduce the risk of injury from
bending and lifting with the new Powerlift 250kg (100kg High Lift
Model) capacity trolley.
• Lifting is made quick and easy with the quiet, clean battery-
powered mechanism
• The batteries have a heavy duty cycle and can be re-charged
overnight. The battery will power approximately 100 - 120 lifts
• The linear activator mechanism is electric, it does not contain
oil. This means it is perfectly clean and virtually silent
• Standard unit includes 2 rigid, 1 swivel, 1 swivel brake castor
• Powdercoated, suitable for wash down
• Safe, clean, powered lift uses an IP 56 linear actuator
Applications:
• General lifting applications requiring small deck and longer
travel
• Especially suited to situations where hydraulic contaminants
can’t be tolerated such as offices, veterinary and medical
clinics, food and pharmaceutical companies
Options:
• Stainless steel deck, chequer plate or rubber surfaced
platform
A C
Model Capacity (kg) Max Height (mm) Min Height (mm) Platform Size (mm)
A 7321008 250 845 380 895 x 480
B* 7321011 As above but with 4 x swivel castors 1 brake, 1 directional lock
C 7321009 100 1500 500 845 x 480
D* 7321010 As above but with 4 x swivel castors 1 brake, 1 directional lock
*Not pictured
a B
Lifting Max Platform Height Min Platform Height Platform Size Wheel Ø Packing Weight
Model
Capacity (kg) (mm) (mm) (mm) (mm) (kg)
A 5401005 100 730 213 450 x 700 100 33
B 5401006 200 865 288 500 x 815 100 69
6
order details | phone: 1300 363 152
SITECRAFT.COM.AU
Ergobin
Overview
Balanced Anti-Tip Table
The Ergobin range are safe and reliable trolleys with rigid ABS
panelling and a tough steel zinc plated base and mechanism for a
long maintenance free working life. These bins are easy and light
to manoeuvre, the floating table models cater for variable product
weight/density requirements, the special “lean out” design
provides comfortable knee space and allows top edge closer
proximity to machines for loading and unloading.
Features Include:
• 24 month warranty (normal operating conditions)
• Increase productivity by up to 23%.
• Lift mechanisms showed no faults over 50,000 cycle testing.
• Unique spring mechanism maintains product at a safe and
convenient working height within the bin
• Automatic Raising and Lowering Mechanism
• Available in White and Grey Recessed wheels for Zinc plated base &
foot protection mechanism
Specifications
Dimensions
Model Capacity
(L x W x H)
1621004 300 975 x 759 x 835
1621005 400 1240 x 750 x 845
1621006 450 1395 x 750 x 920
1621007 500 1240 x 900 x 845
1621008 600 1490 x 900 x 845
1621009 700 1490 x 1035 x 845
8
order details | phone: 1300 363 152
SITECRAFT.COM.AU
Logistec manual hydraulic
stackers
The manual hydraulic stackers are an economical and
sturdy material handling aid. These versatile lifters are easily
manoeuvrable and an optional removable platform is available.
5781045 5781046
Model
A B
Capacity (kg) 400 400
Min Fork Height (mm) 85 85
Max Fork Height (mm) 1200 1500
Load Roller (mm) 700 x 450 813 x 500
Rear Wheels (mm) 125 125
Fork Width (mm) 210 - 545 210 - 545
Fork Length (mm) 650 650
Optional Load Platform 5781047 A B
Safelift
Battery powered work positioner for transporting and positioning
loads quicky and easily. These are highly manoeuvrable,
lightweight lifts designed to take the strain out of any lifting
job from ground level to over shoulder height. Supplied with
520mmW x 460mmL polyethylene load platforms.
• Battery electric with built in battery charger
• 100mmØ steering wheel with brake
• 75mmØ load wheel
Applications
Ideal for use in narrow aisles and confined spaces.
Perfect for all applications from pharmaceutical to catering,
from packing line to food processing.
9321099 9321100
Model Model 4361016
A B
Capacity (kg) 80 80 Capacity (kg) 200
Max Lift Height (mm) 1530 1780 Min Lift Height (mm) 100
Min Lift Height (mm) 120 120 Max Lift Height (mm) 1400
Height (mm) 1730 1980 Platform Size (mm) 470 x 600
Platform Size (mm) 470 x 600 470 x 600
Weight (mm) 43 49
10
order details | phone: 1300 363 152
SITECRAFT.COM.AU
Hallins Lifters
The Newton range of lifters offers a premium quality ergonomic lifting solution that
can be fitted with a wide range of accessories that ensures that almost any load up
to 250kg can be safely and easily lifted and manoeuvred as required. These lifters
have been engineered for flexibility, smooth operation and require low maintenance.
The Newton range are supplied with powdercoated steel frame, aluminium lifting
column and a polyethylene work table as standard.
Overview
Designed to lift, transport and position loads. The Compac has been
developed following extensive market research into the lifting and handling
needs of today’s modern production environment.
The Compac is flexible in design, ergonomic, operator friendly, easy to
use and with its range of features and functionality it meets the needs of
today’s lifting requirements.
Interchangeable Attachments
With over 50 standard interchangeable attachments the Compac can be
used to handle a wide range of products including:
• Reels
• Drums & Barrels
• Boxes & Containers
• Components & Assemblies
• Work Positioning
• Tooling
Model Range
Available in two standard models with maximum lifting capacities of 150kg
and 300kg along with a variety of frame configurations and a full custom
design service making the Compac an ideal choice to handle most lifting
applications.
Powerdrive Compac
The Powered Drive system provides the operator with assistance during
travel whilst retaining all of the standard Compac Mk5 features.
The tiller handle allows for easy steering with twins wheels for increased
control. A toggle switch is operated at the handle to engage or disengage
powered in both forward and reverse directions.
An on/off key can be included to ensure that only suitably trained operators
can use the equipment.
Specifications
Capacity
Model Drive Type Description
(kg)
6051001 Manual Each Compac has its own specification depending on your attachment. 300
6051002 Manual Each Compac has its own specification depending on your attachment. 150
N/A Powered Powerdrive compacs are fully customised for your application N/A
12
order details | phone: 1300 363 152
SITECRAFT.COM.AU
Interchangable Attachments
Platform Attachment Single Spindle Attachments
This is suitable for lifting and positioning loads such as Reels, These attachments have been designed to provide a simple means
Drums, Components, Boxes, Containers, Tooling, Assemblies, of lifting and transporting reels using the reel’s core for support.
etc. Applications include work positioning on assembly lines
and work areas.
Reel Diameter
Model
Min (mm) Max (mm) Model Dimensions (mm)
6051006 220 4450 6051117 To Specification
OPTIONS
Mechanical Rotation
The Reel Handler can be suppliedwith a hand
operated mechanical gearbox to provide
effortless and controlled rotation. This option
is particularly useful for bulky or heavy loads.
14
order details | phone: 1300 363 152
SITECRAFT.COM.AU
OPTIONS (cont.)
Clamp Attachments
Used for gripping loads by the diameter or circumference such as reels, drums, barrels etc and rotating to any position through 360° in
sideways rotation.
16
order details | phone: 1300 363 152
SITECRAFT.COM.AU
Clamp Attachments (cont.)
Side & Forward Rotation Attacment Internal Clamp Attacment
Designed to rotate both sideways and forward this attachment The Clamp Attachment can be supplied with an internal clamping
has many applications such as Drum tipping and front loading arrangement ideal for clamping and rotating heavy items such as
reels of film. mechanical assemblies.
18
order details | phone: 1300 363 152
SITECRAFT.COM.AU
Clamp Attachments (cont.)
Full Electric Clamp and Rotation Attachments
The Logistec Compac Lifter’s fitted with the Powered
Clamp and Rotate attachments are the ultimate
ergonomic tool. These lifter clamp, lift and rotate loads
at the push of a button by the operator.
Accessories to suit
Hallin Lifters
B C
Model 4361019: Slip-on Platform Model 4361006: Crane Jib
D E
Model 4361008: Reel Handler Model 4361086: Reel Handler
A
F G
Model 4361014: Fixed Forks Model 4361013: Adjustable Forks
20
order details | phone: 1300 363 152
SITECRAFT.COM.AU
CUSTomised solutions
Some text here about how we customise, through consultation,
planning and engineering
Forward Drum
Tipper
Mixing Bowl
Rotator
Counter-Balance
Cardboard Drum Lifter
Stainless Steel
MultiLift
Counter-Balanced Beer Keg Lifter Slewing Jib 20L Pail Rotator Pipe Clamp
B C
Model Table Size (mm) Lift Height (mm) Low Height (mm) Capacity (kg)
A 5161006 500 x 400 900 28 150kg
B 5161005 500 x 400 1200 42 150kg
C 5161001 500 x 400 1200 118 150kg
D 5161009 500 x 400 1260 30 150kg
E* 5161011 500 x 400 1800 30 150kg
F 5161014 500 x 400 2000 30 150kg
G* 5161020 (2 stage) 600 x 600 3200 30 150kg
* Not Pictured
22
order details | phone: 1300 363 152
SITECRAFT.COM.AU
Lightweight Walkie Stackers
This lightweight aluminium, foot operated mini-stacker, is available in 2 lift
heights - 1000mm and 1200mm. Featuring a durable hydraulic operation,
lockable rear castors, perspex safety guard and rubberised push handles.
• Weighs only 24kg
• Lifting capacity 100kg
Load Lifter
• One person can safely and easily lift and move heavy loads
• 90kg load capacity
• Lifts material up to 1.72m
• Designed and constructed of durable yet lightweight aluminium
• Quiet high-speed reversible winch quickly lifts heavy loads
• Portable - folds for compact storage and easy transport
• Two stage mast
• Pneumatic wheel model available
Mobile Mate
Manual lifting device for health environments, food manufacturing and
pharmaceutical industries.
• High quality zinc plated finish with stainless table
• Low noise winch with security handle
• Parking brake on both wheels
• Highly manoeuvrable
A B
C D E
24
order details | phone: 1300 363 152
SITECRAFT.COM.AU
Applications and special Build tugs
B A
C d e
26
order details | phone: 1300 363 152
SITECRAFT.COM.AU
Applications
Key Advantages
Brushless Electric Motor
The brushless motor has superior holding abilities to a motor with
brushes, making it less likely to run away on sloped ground.
Brushes also are normally the weak point in traditional electric
motors that tend to burn out under excessive loads or when
working in high temperatures. Brush type electric motors need
ventilation to keep temperatures lower, making it difficult to keep
out water and dust.
Outdoor Use
The Powered Pusher have a high IP44 rating which means it is
ideally suited for both indoor and outdoor use, including rain and
snow conditions. The brushless motor is also suitable for use in
extremely high day temperatures.
28
order details | phone: 1300 363 152
SITECRAFT.COM.AU
Specifications
Model 8461001 8461002
Power
Gearbox Transaxle 24V Transaxle 24V
Motor Power 24V 1000W 24V 1500W
Controller 24V 200A AC Control 24V 300A AC Control
Batteries and Charging
Battery Capacity 70A/hv 140A/h
Charger Type Onboard Auto Onboard Auto Voltage
Voltage Detect Detect
Output 10 Amp 15 Amp
Input 100-240V 100-240V
Recharge time 8 hrs 8 hrs
Towing
Pushing Capacity 25 tonnes* 50 tonnes*
Max. Weight Transfer 500Kg 500Kg
Draw Bar Pull 2500N 5000N
Driving
Max. Speed 6Kph 6Kph
Turning Circle 1.65m 1.65m
Steering Manual Manual
Models 6041063 and 5721024 feature quick lift as standard. This feature is highly efficient and allows
operators to reach maximum lift height in half the time. The pump autometically switches to normal
operation when loads exceed 150kg. The ergonomically designed handle and the additional entry and exit
rolloers make these pallet trucks exceptionally operator friendly.
Capacity Min Fork Height Max For Height Individual Fork Overall Fork Width Fork Length Unit Weight
Model
(kg) (mm) (mm) (mm) (mm) (mm) (mm)
6041063 2500 75 195 150 685 1150 77
5721024 2500 75 195 150 530 1220 80
Capacity Min Fork Height Max For Height Individual Fork Overall Fork Width Fork Length
Model
(kg) (mm) (mm) (mm) (mm) (mm)
5721022 2500 85 195 150 450 1150
30
order details | phone: 1300 363 152
SITECRAFT.COM.AU
Wide Pallet Trucks
For use with plaster board, timber panels, paper rolls etc. They are available in widths up to 1000mm, maximum capacities are 2000kg.
Capacity Min Fork Height Max For Height Individual Fork Overall Fork Width Fork Length
Model
(kg) (mm) (mm) (mm) (mm) (mm)
5721009 2000 85 205 150 800 1150
5721010 2000 85 205 150 900 1150
5721008 2000 85 205 150 1000 1150
5721066 2000 85 205 150 1200 1150
5721067 2000 85 205 150 1500 1150
Capacity Min Fork Height Max For Height Individual Fork Overall Fork Width Fork Length
Model
(kg) (mm) (mm) (mm) (mm) (mm)
5721013 2500 85 205 150 685 915
Capacity Min Fork Height Max For Height Individual Fork Overall Fork Width Fork Length
Model
(kg) (mm) (mm) (mm) (mm) (mm)
5721046 2000 85 205 150 685 1400
5721048 2000 85 205 150 685 1500
5721050 2000 85 205 150 685 1600
5721054 2000 85 205 150 685 1800
5721062 2000 85 205 150 685 2200
5721064 2000 85 205 150 685 2400
Capacity Min Fork Height Max For Height Individual Fork Overall Fork Width Fork Length
Model
(kg) (mm) (mm) (mm) (mm) (mm)
5721016 2500 65 185 150 685 1150
5721027 2500 65 185 150 520 1150
5721018 2000 51 171 150 685 1150
5721004 1000 35 155 150 685 1150
Galvanised Models
Galvanised model including stainless steel bearings and axles, chrome ram and zinc plated pump. These corrosion
resistant pallet trucks are ideal for use in damp conditions, i.e. cold stores.
32
order details | phone: 1300 363 152
SITECRAFT.COM.AU
special application pallet trucks
High Capacity Pallet Trucks Four Way Pallet Truck
Increased capacities for handling 2 high pallets in Unique 4 Direction movement ability provides the
excess of 2500kg, or for moving very heavy objects flexibility to manoeuvre wide loads.
such as safes, paint vats, machinery etc. Maximum
capacity unit available 5000kg.
Specifications
Weighing Range (kg) 2000
Weghing Graduation 1
o
Operating Temperature ( C) -10 to 40
Capacity Min Fork Height Max For Height Individual Fork Overall Fork Width Unit Weight
Model
(kg) (mm) (mm) (mm) (mm) (mm)
5521032 2000 85 205 180 555 77
5521033 2000 85 205 180 690 120
Capacity Min Fork Height Max For Height Individual Fork Overall Fork Width Unit Weight
Model
(kg) (mm) (mm) (mm) (mm) (mm)
5781055 2000 85 205 180 555 117
5521054 2000 85 205 180 690 120
34
order details | phone: 1300 363 152
SITECRAFT.COM.AU
Compact Electric
Pallet Truck
The new Compact Powered Pallet truck incorporates power
drive and power lift enabling effortless movement of pallets
in an exceptionally compact package. This provides unrivalled
manoeuvrability in the tightest of working environments.
Specifications
Model - 3381001
Drive unit - Battery
h14(max)
Operator type - Walkie
l
Load capacity Q (kg) 1500
Load center c (mm) 600 h14(min) x
c Q
Load Distance (Raised / Lowered) x (mm) 883/946
Wheelbase y (mm) 1250
h3
h13
Weights
y
Dimensions
Lift Height h3 (mm) 115
Height of tiller arm in operating h14 (mm) 820/1170
position, min/ max
Fork height, lowered h13 (mm) 85
Overall length l1 (mm) 1600
Length to face of forks l2 (mm) 450
Overall width b1 / b2 (mm) 560
Fork dimensions s / e / l (mm) 55/150/1150
Fork spread b5 (mm) 560
Outer turning radius Wa (mm) 1475 l2
Performance Ast
Specifications
Model - 3381007
Drive unit - Battery
Operator type - Walkie
Load capacity Q (kg) 2000
Load center c (mm) 600
Load Distance (Raised / Lowered) x (mm) 916 x 982
Wheelbase y (mm) 1418
Weights
Service weight (Incl. battery) (kg) 535
Dimensions
Lift Height h3 (mm) 125
Height of tiller arm in operating h14 (mm) 825 / 1190
position, min/ max
Fork height, lowered h13 (mm) 85
Overall length l1 (mm) 1748
Length to face of forks l2 (mm) 598
Overall width b1 / b2 (mm) 710
Fork dimensions s / e / l (mm) 55 x 170 x 1150
Fork spread b5 (mm) 685
Outer turning radius Wa (mm) 1638
Performance
Travel speed, laden/ unladen (km/ h) 5/ 5.5
Lifting speed, laden/ unladen (m/ s) 0.051/0.060
Lowering speed, laden/ unladen (m/ s) 0.052/0.059
Maximum gradeability, laden/ (%) 8/16
unladen 2S5 min.
Service brake - Electromagnetic
Drive
Battery voltage/ rated (V/ Ah) 24/60
capacity (5h)
Battery weight (kg) 205
36
order details | phone: 1300 363 152
SITECRAFT.COM.AU
heavy duty electric StradDLE Stacker
Designed to moveand lift pallet loads weighing up to 90kg to heghts of 3300mm, ergonomically designed controls allows
operations to be acieved effortlessly.
Specifications
Model - 3381008
Drive unit - Battery
Operator type - Walkie
Load capacity Q (kg) 910
Load center c (mm) 600
Wheelbase y (mm) 1374
Weights
h4
Service weight (Incl. battery) (kg) 800
h1
Dimensions
Height, Mast Lowered h1 (mm) 2110
Free Lift h14 (mm) 820/1170
h1 3
m2
Lift Height, Mast Extended h13 (mm) 85
Overall length l1 (mm) 1600
x
Length to face of forks l2 (mm) 450
l1
Overall width b1 / b2 (mm) 560
Fork dimensions s / e / l (mm) 55/150/1150
Fork spread b5 (mm) 560
Outer turning radius Wa (mm) 1475 Wa
b5
b1
b4
b2
Performance
Travel speed, laden/ unladen (km/ h) 3.5/4
Lifting speed, laden/ unladen (m/ s) 0.051/0.060
Lowering speed, laden/ unladen (m/ s) 0.052/0.059
Maximum gradeability, laden/ (%) 2/6
unladen 2S5 min.
Service brake - Electromagnetic
Drive
Battery voltage/ rated (V/ Ah) 24/60
capacity (5h)
Battery weight (kg) 45
Capacity Min Fork Height Max For Height Overall Fork Width Fork Length Unit Weight
Model
(kg) (mm) (mm) (mm) (mm) (mm)
9321137 1000 85 800 680 1140 112
9321135 1000 85 800 520 1140 105
38
order details | phone: 1300 363 152
SITECRAFT.COM.AU
Skid Handling (cont.)
Stainless Steel High-Lift Pallet Trucks
Ideal for lifting applications in the food and pharmacutical industries
Capacity Min Fork Height Max For Height Overall Fork Width Fork Length Operation Net Weight
Model
(kg) (mm) (mm) (mm) (mm) (kg)
5781060 1000 85 800 540 1165 Manual 116
5781061 1000 85 800 540 1165 Electric 144
5781062 1000 85 800 680 1165 Manual 126
5781063 1000 85 800 680 1165 Electric 149
B A
• 500 and 1000kg capacity models lifts skids from 83mm to 870mm
• Strong, robust all-steel construction for maximum durability
• Rear swivel castors make positioning easy
• Foot operated brakes on rear wheel for safe parking
• Safely lifts loads with easy to operate hydraulic mechanism
40
order details | phone: 1300 363 152
SITECRAFT.COM.AU
Economy SKID LIFTERs
Combination of pallet truck and lift table, these units are ideal for
loading and unloading operations. The 1000kg capacity model
lifts skids and stillage’s up to 850kmm (Maximum for height).
Features manual/foot operated hydraulic operation with easy to
use control lever.
6841039 6841041
Model
A B
Load Capacity (kg) 1000 1000
Min Fork Height (mm) 85 85
Max Fork Height (mm) 830 830
Fork Width (mm) 526 690 A
Fork Length (mm) 1115 1115
Net Worth (kg) 135 138
SKID Tilters
Designed to give the user an ergonomically correct position to reach loads easily without the necessity of bending down or stretching up.
• Handle can be turned and locked in osition away from the work area.
• Forks can be tilted up to 90o
• Lifts and tilts as separate operations - easy to use control levers
• Ideal for unloading crates and stillages
6841045 6841044
Model
A B
Capacity (kg) 1000 1000
Lifting Height, Vertical(mm) 285 285
Min Fork Height (mm) 85 85
Fork Lengh (mm) 800 800
Handle Height (mm) 1138 1138
Overall Fork Width (mm) 560 560
Overall Width (mm) 683 683
Overall Length (mm) 1325 1410
Overall Height, Raised (mm) 950 950
Oervall Height, Lowered (mm) 750 750
Power Unit -- 0.8kw/12V A
Weight (kg) 178 178
Simple, Clear
Controls
Unbreakable
polycarbonate
Built-in automatic
safety screen
industrial-duty
battery
charger
Maintenance-free
gel batteries
Large diameter
steered rear wheels
for easy movement
42
order details | phone: 1300 363 152
SITECRAFT.COM.AU
Quickstak - Options
Self-propelled Machine
• Ideal where loads have to be moved longer distances, on
uneven floor surfaces or up ramps
• Drive wheel is electronically controlled and can be programmed
Drive Unit
to suit any applications
• Controls are accurate and precise - with infinitely variable
speed in both directions, two or three speed limits, and a range
of adjustable parameters
• Convenient controls—raise, lower, drive and steer—are right at
your fingertips
• A plug-in unit individually tailors each machine’s characteristics
and provides full fault diagnosis
High Capacity
>> 2500kg capacity available in 1000mm and 1200mm lift height
Non-straddle Legs
>> Non-straddle leegs available. Contact us for more customised
options
Model Diameter (mm) Total weight (kg) Turntable height (mm) Maximum capacity (kg)
7321025 1100 100 22 2000
44
order details | phone: 1300 363 152
SITECRAFT.COM.AU
Palift - Spring Loaded Pallet Positioner
The Palift is a load elevating and lowering device designed to eliminate the bending required when loading or unloading
palletised goods. Palift is a simple, robust mechanism consisting of a scissor lift between two steel platforms. The lifting
force is generated by heavy duty compression springs with shock absorbers fitted to dampen the vertical movement of
the load. A selection of springs is available to suit a wide range of loads up to two tonnes.
Model 7321028
Compressed Height
Model Type Capacity (kg) Extended height (mm) Table diameter (mm)
(mm)
7321028 Standard Palift 2000 230 700 1100
7321219 Mobile Base N/A N/A N/A N/A
7321220 Mobile Handle N/A N/A N/A N/A
*Not Pictured
EZE Loader is fork liftable without the need of an additional option. 760mm raised height places the load at a convenient height for
No fork pockets on sides of base frame that can be a potential maximum loading comfort, safety and efficiency.
pinch point or tripping hazard.
Location of air valves (2) and pressure gauge at end of unit As load is applied, the pallet level adjusts in order to maintain a
provides protection and easy accessibility. The EZE Loader is convenient working height. Fully loaded pallet lowers to 222mm,
self contained and does not require a constant air supply. Simple allowing for convenient load removal by forklift.
adjustments of weight capacities are made with the bleed valve
pictured above.
46
order details | phone: 1300 363 152
SITECRAFT.COM.AU
Low Profile Scissor Table
The ultra low profile scissor lift table is ideally suited to use with
a hand pallet truck. The LoLift can be used in applications where
wheeled access onto the lift deck is essential. This includes hand
pallet industrial applications and the LoLift is also an ideal solution
for disabled access up low steps.
• 1000 kg capacity
• 40mm height platform
• Reach over only 9.5cm’s allowing easy operator access to load
from sides
• Wall mount control standard. Option of pendant or foot controls
• Durable construction in accordance with AS 1250 steel standard
• Safety bars or skirts to protect operators. Photo eye protection
across entrance
Capacity Vertical Minimum Maximum Length x Elevation Side Reach Power Weight
Model
(kg) Stroke (mm) Height (mm) Height (mm) Width (mm) Time (secs) Over (mm) Unit (kW) (kg)
7321085 1000 800 40 840 1300 x 1300 20S 95 0.75 240/1/50
OPTIONS
Platform size: Standard platforms available ex stock. Hinged flaps: Hinged flaps can be fixed to platform
Non-standard platforms can be built to client’s and pit edge for flush pit installation
specific dimensions
Forklift sockets underneath: Forklift sockets can be Forklift sockets at the sides: Forklift sockets can be
incorporated into the base frame for easy relocation of welded to the sides of the base frame of the lift table
the lift table (lowered height increased) for easier relocation (lowered height not increased)
External power unit: Hydraulic power unit can be Skirt: Concertina skirt made from reinforced vinyl with
external to the lift table, connected via a hydraulic hose steel stiffening rods to prevent ingress into mechanism
IP65 electrical installation: electrics to IP65 degree Special paint: Standard enamel finish is red with yellow
of protection (to AS1939) for outdoor or washroom safety bar. Special colours or paint formulations can be
applications provided
Chequerplate platform: Chequerplate platform for Galvanised platform: Entire platform can be hot
pedestrian non-skid surface dipped galvanised for enhanced durability and
corrosion resistance.
48
order details | phone: 1300 363 152
SITECRAFT.COM.AU
Double scissor tables
Specifications:
• Minimum Platform Size (mm): 1200 x 1200
• Maximum Platform Size (mm): 3000 x 3000
• Maximum Vertical Travel (m): 12
• Available with multiple door configurations
Features:
• No pit required for installation
• Minimum platform height of less 40mm
• Can be supplied freestanding or into an existing shaft
• Suitable for both internal and external applications.
50
order details | phone: 1300 363 152
SITECRAFT.COM.AU
Work station jib cranes
Work Station Jib Cranes provide excellent coverage in circular Precise Load Positioning
areas not efficiently served by a main crane. They’re ideal for A hoist trolley with low rolling resistance and lubricated-for-life
supporting tool balancers, air balancers, hoists, vacuum lifters sealed bearings combined with the easy rotation of the boom
and welding wire feeders. And they can handle up to 200° rotation make The Work Station Jib Cranes are ideal for applications
when column or wall mounted, and up to 360° rotation when floor requiring positioning and spotting loads.
mounted. Gorbel Work Station Jib Cranes increase productivity
through easy boom rotation and trolley movement—thus providing
DURACOMP 4™ Wheels Operate Quietly and
a rapid return on investment. They also reduce injuries and
improve safety, since only a low force is required to start and stop Withstand Wear and Tear
the boom rotation and hoist trolley. Trolley wheels are made of DURACOMP 4™—a food grade material
that outperforms steel wheels in endurance and destructive testing.
Wheels are tapered to match the track flange’s 2° taper, which
Ergonomic design makes for
enhances wheel life and keeps the trolleys running smoothly. Trolleys
superior ease of movement, rotation,
are designed to operate in temperatures from -15°C to 93°C.
and positioning
Thrust and Pull Requirements
Easy Movement All WSJ200 or AL100 Jib Cranes require a structurally adequate
wall or column to support the jib. Refer to the “thrust & pull” forces
Gorbel Work Station Jib Cranes are easier to move and position
on the following pages to determine the forces that your structural
than traditional I-beam jibs. The cold-formed, highstrength
support must resist to properly support the jib.
enclosed track design keeps rolling surfaces clean, which
contributes to easier movement and longer life. The track’s low
Work Station Jib Cranes are easy to install
weight-per-foot reduces the dead weight of the boom. And all
Wide Variety of Spans and Capacities The Work Station Jib Cranes
enclosed track profiles feature a 2° taper in the lower running
are available in a wide range of spans and capacities to meet a
flange, which helps center the trolley within the track. This
variety of needs without the extra costs and lead time associated
increases wheel life and allows smooth rolling of the trolleys.
with customization.
52
order details | phone: 1300 363 152
SITECRAFT.COM.AU
fax: 1300 722 383 email: sales@sitecraft.com.au
MANUAL HANDLING 53
Inteligent lift devices: g-force
Infinite Speed Control Float Mode
The Intelligent Lifting Devices move with the operator. They move The G-Force® and Easy Arm® units include our versatile Float
as fast or as slow as the operator chooses to move. They are Mode. With a mere 1/2 lb (227 g) of force on the load itself,
ideal for applications that require high speed at some points in the Operators can precisely orient loads throughout the full stroke
cycle and slow, precise movements at other points. range by manipulating the load with their hands.
Anti-Recoil Technology
This prevents the G-Force® and Easy Arm® units from moving or
recoiling when there is a sudden change in load, reducing the risk
of potentially serious injury.
Capacity Overload
The units will not lift if the load exceeds their rated capacity.
Power Loss Protection
A fail safe load braking system locks the unit in place in the event
of a power loss.
• Other Features
The iQ allows you to control one G-Force®, Easy Arm®, or G-Jib™ unit with two handles, which is ideal for applications when tooling
requires more than one point of control. You can also control two G-Force® units with one handle, which is useful when you want two
points of control for large tooling.
54
order details | phone: 1300 363 152
SITECRAFT.COM.AU
Bridge crane mounted Configuration
More precise than hoists, more responsive than air balancers, our bridge crane mounted G-Force® units
improve safety, productivity and quality, resulting in a direct increase to your bottom line.
Applications:
• Automotive assembly (engines, transmissions, chassis components)
• Heavy equipment manufacturing
• Tool & die changeouts
• Natural gas & oil industry (valves, drilling components, etc)
• Repetitive lifting jobs
• Parts assembly
• Machining
• Process equipment maintenance
7321077 7321078
Model
E F
Max Load Capacity - Load & Tool (kg) 75 150
Max Lifting Speed Unloaded (m/min) 55 27
Performance Options
Standard Lengths
Approx. Shipping
Model Number Compacted to
Weight (kg)
Expanded (mm)
5321005 910 - 3600 78
450mm
Widths
56
order details | phone: 1300 363 152
SITECRAFT.COM.AU
Expanding Roller
Conveyors
Excellent for handling odd shaped boxes, bags and low grade cartons.
• Self tracking - Cartons follow the twists and turns of the
conveyor path without using engineered curves
• Adjustable height - Adjustable locking bolts to raise or lower
the conveyor bed height. Standard adjustable range is from
762mm to 1080mm, 150mm castor option adds 23mm to
conveyor height to make adjustable range from 785mm to
1103mm
• 38mm side plates - Aluminium alloy construction features a
ribbed design for added durability.
Assembled with bolts and lock nuts
• Castors with brakes - 127mm x 38mm swivel castors
roll easily. Castor brakes lock both wheel and swivel
simultaneously while the conveyor is in use
• Axle centres - When expanded, the distance between axle
centres is 127mm. Optional axle centres affect compacted
conveyor length.
• Extended lengths - The Expanding Roller conveyors are
available in any length. If your application requires a length not
listed in the above chart, call our Sales Team for assistance
Specifications
Capacity per linear metre (level) (kg) 200
Widths available (mm) 450, 600 and 750
Adjustable conveyor height (mm) 762 to 1080
Performance Options
Standard Lengths
Approx Shipping
Model Number Compacted to
Weight (kg)
Expanded (mm)
5321015 1200mm - 3700mm 102
450mm
Widths
the conveyor and drops down skewing off the conveyor in 5321021
Widths
Specifications
Capacity per linear metre (level) (kg) 150
Widths available (mm) 450, 600 and 750
Adjustable conveyor height (mm) 800 to 1100
Zero-pressure Accumulation Under Roller Electronic Package Stop Heavy Duty Connectors
Electronic controls enable Automatically stops cartons at Easily connects two or more
cartons to move directly to the discharge end of conveyor. When conveyors to span greater
discharge end without stopping carton is removed, conveyor starts distances.
until they reach the last zone of again to bring next carton into
accumulation. position (optional reflective photo
cells shown).
58
order details | phone: 1300 363 152
SITECRAFT.COM.AU
Heavy Duty economy
Expanding conveyors
Standard Features
Skate
Excellent for handling odd and soft shaped packages, these Ideal for applications in the food industry or where corrosive
roller conveyors have an excellent self-tracking performance. product is being handled. These Conveyor are manufacture with
all parts in stainless steel.
28
Between
Frame 10
60
order details | phone: 1300 363 152
SITECRAFT.COM.AU
Rollers
The standard range of rollers are manufactured with a ‘oval’
shaped formed axle. This effectively locks the axle in the frame
and holds the inner bearing firmly thus ensuring maximum STRAIGHT ROLLER TYPE
efficiency from the ball race. An internal spring at one end enables OVER BEARING WIDTH
the axle to be laterally moved for ease of assembly, alterations to
roller pitch or removal for maintenance. Three ranges are offered
to suit standard applications and operating conditions. The rollers
ROLLER FACE WIDTH
in curved sections are of the double differential type, enabling
cartons, etc. to maintain a controlled course and not wander to
CURVE ROLLER TYPE
the outside of the curve. Although manufactured to suit standard
OVER BEARING WIDTH
gravity convey frames, non-standard lengths and axle types are
available on application.
Capacity Capacity
These rollers are made from 51mm O.D. ERW tube with 1.2mm These rollers are made from 51mm O.D. ERW tube with 1.6mm
wall, offering an economical alternative to the 110 kg steel roller. wall, providing a strong and durable roller. The bearing is all steel
The bearing inner and outer is manufactured from acetal with a construction incorporating a hardened steel, caged ball bearing,
single row of carbon steel balls. shielded and greased.
Rollers 51mmØ Specification - 60kg Steel (1.2mm wall) Rollers 51mmØ Specification - 110kg Steel (1.6mm wall)
Overall Roller Face Over Bearing Overall Roller Face Over Bearing
Frame Frame
Model Frame Width Width Width Model Frame Width Width Width
Type Type
(mm) (mm) (mm) (mm) (mm) (mm)
2361070 300 233 238 Straight 2361065 300 226 238 Straight
2361071 450 385 390 Straight 2361007 450 378 390 Straight
2361074 600 537 542 Straight 2361066 600 530 542 Straight
2361072 300 2 x 111 238 Curve 2361067 300 2 x 104 238 Curve
2361073 450 2 x 186 390 Curve 2361068 450 2 x 180 390 Curve
2361075 600 2 x 263 542 Curve 2361069 600 2 x 254 542 Curve
Straight Sections
Model Overall Width Length Pitch
Steel Wheel Nylon Wheel (mm) ‘D’ (mm) ‘C’ (mm) Wheel Conveyor Straight Sections
C
2361027 2361045 300 1500 75
2361028 2361046 300 1500 150
2361029 2361047 300 3000 75 D
Curved Sections
Model Overall Width Angle ° Pitch Outside Wheel Conveyor Curved Sections
Steel Wheel Nylon Wheel (mm) ‘D’ ‘A’ (mm) Radius ‘B’
2361035 2361053 300 90 75 1220
2361036 2361054 300 90 150 1220
2361037 2361055 300 45 75 1220
2361038 2361056 300 45 150 1220
2361039 2361057 450 90 75 1220 ANGLE
25 Between
Frame 10
2361043 2361061 450 45 75 1220
A°
2361044 2361062 450 45 150 1220
64
62
order details | phone: 1300 363 152
SITECRAFT.COM.AU
Wheeled Tracks
These versatile wheel tracks can be used in a wide variety of warehousing and materials handling situations. Available in
either standard 75mm or 150mm pitch, they are ideal for use in warehousing shelving for the deep storage of parcels. As
the front parcel is removed, the whole line moves up to take its place.
The wheel track utilises the same steel and nylon wheels used in the wheel conveyor, allowing choice depending
upon load capacity and operational use. The standard 3000mm long tracks can be cut to any length to suit specific
installations. By using the tracks mounted on rigid supports, a mini conveyor can easily be set up to suit all kinds of
materials handling situations.
Cylindrical objects
held steady
Length
58
25 TYP 590 TYP Ø14 Hole Type
Wheel Pitch 10
47
45
50mm
Steel Ball
25mm
100 Steel Ball
50mm
BSP Thread 31
110 63.5
Model. Skates/
Width Capacity Height Extension
Rollers
Skate Roller (mm) (kg per length) (mm) (mm)
per Shaft
4521007 4521002 350 5/1 150 700-1090 2000-7500
4521008 4521004 460 6/2 150 700-1090 2000-7500
4521009 4521005 610 8/2 150 700-1090 2000-7500
4521010 - 350 5/1 150 700-1090 2000-7500
4521011 - 460 6/2 150 700-1090 2000-7500
4521012 - 610 8/2 150 700-1090 2000-7500
4521001 4521001 Optional packaging stop
64
order details | phone: 1300 363 152
SITECRAFT.COM.AU
Shifta-Lifta
Mobile Warehouse
Elevator Conveyor
This mobile Elevator Conveyor conveniently folds up and rolls
away for easy storage and keeps your working area safe and clear.
The SHIFTA–LIFTA can be used as a mobile horizontal conveyor
or at the push of a button converts into a fast loading elevator for
loading or unloading mezzanine floors, pallet racking or containers.
Features
• Quality integrated roller motor
• Upper and lower emergency stop
• Easy to operate Fail Safe hydraulic lift
• Design Compliance Certification
• Highly Maneuverable
• No license required
• Forward and reverse
Specifications
Model 8361020
Compact Height (mm) 930
Compact Length (mm) 2540
Compact Width (mm) 695
Extended Length (mm) 5025
Extended Height (mm) 3690
S.W.L. (kg) 40
Max Carton Width (mm) 450
Power 240V Single Phase Roller
Transmission Direct Drive
Belt (mm) 375 Cleated
Hydraulics .76Kw Pump
Customised Options
Sitecraft can customise the Shifta-Lifta to suit your specific
requiments. From shorter belt lengths to additional control panels.
As seen below the Shifta-Lifta has the ability to as many link
flexhible conveyors as you like to provide a production line style
workflow.
*NOTE* Twin Scissor and Low Profile Lift Tables are made to order please contact Sitecraft on 1300 363 152 for details and specifications.
66
order details | phone: 1300 363 152
SITECRAFT.COM.AU
Single Scissor Lift Tables Stainless Steel Scissor Lift
The Single Scissor Lift Tables are our most widely used industrial
Tables
platforms. The lift table can be installed in a pit or operated from
Logistic’s stainless steel scissors are all manufactured from high
the factory floor. With a stroke of a 600mm up to 1800mm and
quality materials with excellent high corrosion resistance properties.
platform lengths ranging from 950mm to 3000mm, the Logistec Lift
The tables are suitable for use in food, pet food, pharmaceutical
Table can perform most normal lifting duties. This table is available
industries and slaughter houses etc. where standards of hygiene
in a number of standard models with varying capacities, strokes
are very important. Stainless steel tables are often used in wet
and platforms sizes, but can also be built to the user’s exact
environments as a consequence of manufacturing process or due
specifications.
to cleaning procedures. In these conditions we recommend that the
Ideal Applications: power unit (motor) is placed in a protected area.
• To maintain the load at optimum working height
Materials in our stainless steel tables:
• To lift heavy components up to required level • Platform, base frame and scissor; stainless steel AISI304
• To handle fragile goods • Axles, wheels and bolts; stainless steel AISI304
• For packing and unpacking of goods • Safety trip bar; Aluminum
• To stack pallets automatically or manually • Cylinders; Hard chrome plated piston rod, joint bed and piston
• In a system that requires equalization of levels tube
Lift Time Platform Size Load Capacity Max Platform Height Min Platform Height
Model
(seconds) (mm) (kg) (mm) (mm)
Single Scissor
??? 21 800 x 1200 1000 EDL 1000 180
1941010 21 1200 x 1200 1000 EDL 1000 180
1941005 23 1000 x 2000 1000 EDL 1330 230
Stainless Steel
1941016 21 1350 x 1100 1000 EDL 1000 180
Made to Order
68
order details | phone: 1300 363 152
SITECRAFT.COM.AU
Spring Operated Tilting
Stand
>> Side entry pallet dispensers incorporate a pair of telescoping
tines mounted onto the deck of a hydraulic table
>> The telescoping tines project out to support and elevate the
pallet stack. this allows the dispensing of the unsupported
bottom pallet. The tines then lower, retract away from the
stack, elevate and are replaced in the stack leaving the
bottom pallet unsupported to repeat the cycle
>> A wide range of pallet sizes can be handled without alteration
to the machine
>> When used with conveyors pallet stacks can be forked or
conveyed into position and the individual pallets dispensed
onto the conveyor
>> As stand alone units the side entry dispensers can accept
a pallet stack placed on the floor and dispense individual
pallets onto the floor. This means the pallet stack can be
loaded and individual pallets removed using only a hand Made to Order
pallet truck
Pallet Inverters
Pallet inverters are used for the rotation of pallet loads where
exchange of pallets or inversion of product is required.
Without a pallet inverter it is necessary to load and unload pallets
by
hand which is difficult, slow, and a source of potential worker
injury.
Pallet Inverters eliminate the need for manual handling and
therefore
eliminate the injury risk whilst increasing cycle times and
productivity.
Pallet Inverters can operate automatically and operators and other
workers in the vicinity need to be protected from any contact with
the inverter as it rotates. Safety fences are essential and interlock
light curtains add extra security to workplaces.
>> Pallet inverters consist of a rotating box incorporating a
clamping mechanism attached to a fixed base frame
>> The clamp hydraulically actuated and the sensor plates
prevent any product damage
>> Rotation occurs around the large precision bearing and is
powered by a torque boosted VSD Controlled electric motor
>> Inverter function is controlled by the on-board Microprocessor
controller which provides fault diagnosis, consistent and
trouble free operation Made to Order
>> The operator (usually the forklift driver) needs to press only
one button to initiate a full cycle
70
order details | phone: 1300 363 152
SITECRAFT.COM.AU
7.5 - 10 Tonne General Purpose
Fixed Jibs
These jibs offer maximum extension of 2 metres or 3.5 metres
and are fixed with wide pocket centres.
>> 7.5 Tonne Fork pocket size: 180 x 80mm
>> Galvanised finish
>> 10 Tonne Fork pocket size: 230 x 110mm
>> Fork pocket centres: 875mm
10000kg Cap.
Model 3001151
Model 3001211
Safe Working Load Per Position (kg)
Model
1 2 3 4 5 6
Extension (mm) 770 2010 2390 2770 3150 3530
3001211
SWL (kg) 4500 1100 630 470 300 150
Note: The lift capacities stated are a structural rating for the jib only, and make no claim as to the suitability of the forklift. Actual forklift
capacity may be less than the structural capacity of the jib. Check with the forklift supplier for actual working capacities.
In accordance with AS2359.1, when lifting with a jib attachment, the nett lifting capacity should be 0.8 times the rating of the forklift, to allow
for a swinging load.
42°
28°
Note: The lift capacities stated are a structural rating for the
jib only, and make no claim as to the suitability of the forklift.
14°
Actual forklift capacity may be less than the structural
1360
capacity of the jib. Check with the forklift supplier for actual
1095
working capacities.
795
655
472
In accordance with AS2359.1, when lifting with a jib
attachment, the nett lifting capacity should be 0.8 times the
780
rating of the forklift, to allow for a swinging load.
1360
570 1270 MIN (Position #3)
2030 MAX (Position #5)
72
order details | phone: 1300 363 152
SITECRAFT.COM.AU
Jib Attachments
Simple slip on jib attachment, suitable for most forklifts. Two lifting points
available and supplied with one safety swivel hook. Galvanised finish. Unit
weight: 45kg
1000 450
500
130
2000kg Cap.
Model 3001159
Model SWL (kg) Fork Pocket Size (mm) Fork Pocket Centres (mm)
3001159 2000 165 x 65 275
1200
1100
550
4500kg Cap.
Model 3001162
Model SWL (kg) / 550mm SWL (kg) / 1100mm Fork Pocket Size (mm) Fork Pocket Centres (mm) Unit Weight (kg)
3001161 2500 1500 165 x 65 740 75
3001162 4500 3000 180 x 80 875 140
3001163 7000 5000 180 x 80 875 210
3001160 11000 8000 230 x 110 875 260
Unit
SWL (kg) / Fork Pocket Fork Pocket
Model Weight
654mm Size (mm) Centres (mm)
(kg)
3001134 2000 165 x 65 285 64
2000kg Cap.
Model 3001134
For forklifts
Slip-on bulk bag jib attachment with 4 lifting points. Fitted with safety swivel hooks.
>> 2000kg safe working load
>> Hook centres 900mm
>> Load centre 700mm
>> Pocket size 160 x 65mm
>> Pocket centres 640mm
2000kg Cap.
Model 3001004
Note: The lift capacities stated are a structural rating for the jib only, and make no claim as to the suitability of the forklift. Actual forklift
capacity may be less than the structural capacity of the jib. Check with the forklift supplier for actual working capacities.
In accordance with AS2359.1, when lifting with a jib attachment, the nett lifting capacity should be 0.8 times the rating of the forklift, to allow
for a swinging load.
74
order details | phone: 1300 363 152
SITECRAFT.COM.AU
Container Ramps
This container ramp is designed for bridging into standard
containers from ground level. The self-levelling lip allows for full
load capacity when on slightly uneven ground. The ramp footing
folds up to allow access to the fork slippers for transport. Hand
grip loops are provided for this purpose. The standard finish is
enamel painted ‘safety yellow’ over primed steel.
Model 3001024
3000
172 X 72mm
slipper outside size
Fork Tine
2500kg Cap.
100 x 45 x 1050mm
clear length Model 3001061
(both ends)
Safe Working Load Centre Unit Weight Fork Pocket Fork Pocket
Model
Load (kg) (mm) (kg) Size (mm) Centres (mm)
3001061 2500 600 225 160 x 60 775
3000
172 X 72mm
slipper outside size
Fork Tine
125 x 35 x 1200mm
slipper (both ends)
3000kg Cap.
Model 3001255
Safe Working Load Centre Unit Weight Load Guard Fork Pocket Fork Pocket
Model
Load (kg) (mm) (kg) Height (mm) Size (mm) Centres (mm)
3001255 3000 600 260 600 160 x 60 775
76
order details | phone: 1300 363 152
SITECRAFT.COM.AU
Fork Spreader with Load
Guard
The tarp spreader is used to safely cover high truck loads with a
tarpaulin by forklift. This slip-on attachment is easily fitted onto the
fork tines and is secured by a safety chain. The prong is secured
by a locking pin and can be easily removed to allow convenient
storage.
Note: We recommend a minimum forklift size of 2.5 tonne
capacity.
300kg Cap.
Model 3001216
Safe Working Load Centre Unit Weight Fork Pocket Fork Pocket
Model
Load (kg) (mm) (kg) Size (mm) Centres (mm)
3001216 300 600 160 165 x 65 745
Pallet Hook
Versatile unit which features adjustable height and fork tine
width positioning, making this unit ideal for the transport and
construction industry. Load balancing is carried out by positioning
the lifting ring to suit the centre of gravity of the load. Enamel paint
finish.
125 x 45 x 1050LG
Fork Tines
1055
1200 1010
2200kg Cap.
Model 3001114
Model Safe Working Load (kg) Load Centre (mm) Unit Weight (kg)
3001114 2200 600 215
4500kg Cap.
Model 3001115
125 x 45 x 1055LG
Fork Tines
2000kg Cap.
1055
Model 3001113
1200 1010
Model Safe Working Load (kg) Load Centre (mm) Unit Weight (kg)
3001113 2000 600 196
78
order details | phone: 1300 363 152
SITECRAFT.COM.AU
Fork Extension Slippers
Fork extensions slippers extend the versatility of the fork truck.
These slim profile slippers have been designed and manufactured
in accordance with AS2359.15 which requires the slippers used
for general usage to be not longer than 167% of the supporting
tine’s length. If the slippers are longer than 167% beyond the tine
length, the usage must be restricted to their specific application.
>> Made from high tensile grade steel
>> Supplied with instructions
>> High safe working load (SWL) rating
>> Supplied with toggle locking pins
>> Fitted with rating plate
>> Zinc plated for corrosion protection
>> Custom built units have a painted finish
Length To Suit Max Tine Size Weight per pair SWL per pair
Model
(mm) (mm) (kg) at 600mm l/c
3001039 1600 100 x 45 50 3000
3001040 1800 100 x 45 56 3000
3001041 2100 100 x 45 66 3000
3001042 2400 100 x 45 75 3000
3001043 1600 130 x 50 60 4500
3001044 1800 130 x 50 66 4500
3001045 2100 130 x 50 78 4500
3001046 2400 130 x 50 88 4500
3001047 1600 155 x 55 91 6500
3001048 1800 155 x 55 102 6500
3001049 2100 155 x 55 119 6500
3001050 2400 155 x 55 136 6500
3001256 3000 155 x 55 170 6500
3001051 1800 160 x 65 133 8500
3001052 2100 160 x 65 155 8500
3001053 2400 160 x 65 177 8500
3001054 3000 160 x 65 221 8500
3001169 1800 Custom Built to suit 170 8000
3001170 2100 Custom Built to suit 200 8000
3001171 2400 Custom Built to suit 220 8000
3001172 3000 Custom Built to suit 280 8000
3001173 2100 Custom Built to suit 380 12,000
3001174 2400 Custom Built to suit 430 12,000
3001175 3000 Custom Built to suit 540 12,000
3001176 3500 Custom Built to suit 630 12,000
3001177 2400 Custom Built to suit 520 16,000
3001178 3000 Custom Built to suit 650 16,000
3001179 3500 Custom Built to suit 760 16,000
Fork Pocket Fork Pocket Prong Diameter Prong Length Safe Working Load (kg) / Unit Weight
Model
Size (mm) Centres (mm) (mm) (mm) Load Centre (mm) (kg)
3001124 190 x 65 345 40 1200 200 at 600 91
3001125 190 x 65 345 50 1800 250 at 900 106
3001126 190 x 65 345 60 2800 340 at 1400 141
3001127 190 x 65 345 70 2800 510 at 1400 163
3001128 190 x 65 345 80 2800 850 at 1400 194
3001257 180 x 80 360 90 2800 1285 at 1400 293
3001129 180 x 80 360 100 2800 1700 at 1400 328
Cylinder Cages
Suitable for storage and transport of gas cylinders, this unit is fitted with a
drop down ramp allowing for bottles to be rolled easily into position without
lifting. Supplied with load binder to secure cylinders. Enamel paint finish.
80
order details | phone: 1300 363 152
SITECRAFT.COM.AU
Goods Cage
Suitable for storage and transport of furniture and whitegoods,
and is ideal for the transportation of goods between ground and
mezzanine levels. Enamel paint finish.
Note: The forklift goods cage IS NOT designed or certified to
convey personnel.
1000kg Cap.
Model 3001236
Brick Cages
Designed to convey pallets of bricks or similar loose
products safely to a work location via overhead crane.
Suitable for 1200mm square pallets (1240mm clear inside), and
up to 1500mm overall height. Zinc plated finish. The cage can be
supplied as a fully assembled welded unit (3001259) or as a flat
pack for self assembly (3001260) which is then bolted together.
Available in capacities of up to 20
tonnes
82
order details | phone: 1300 363 152
SITECRAFT.COM.AU
Economy Chain Block
An economical alternative that complies with strict Australian standards and offers a lifting solution
for loads up to 5 tonnes.
>> Compact and lightweight for easy handling.
>> Steel structural components for maximum strength
>> High tensile grade 80 alloy steel chain for safety and reliability
>> Zinc plated grade 80 load chain on all standard lift heights
>> Heat treated triple spur gears, shaft and pinions
>> Quality caged needle bearing on load sheave and bearings on the bottom hook
Lever Block
>> A range of cost effective lever blocks suitable for most lift and tensioning operations and
complies with strict Australian standards.
>> Compact, lightweight and portable.
>> Steel structural components for maximum strength with a durable powdercoat finish.
>> High transmission efficiency with single action free wheel for ease of use.
>> Heat treated triple spur gears, shaft and pinions.
Girder Trolleys
All girder trolleys comply with strict Australian standards.
>> High quality construction
>> Fully adjustable to suit different beam widths
>> High-grade, fully sealed bearings for maintenance free long life
>> Anti drop plates as standard for improved safety and compliance
>> Single pin push type
Note: Geared and double pin versions are also available.
Pipe Trolley
Girder clamps can be used safely to suspend a chain block or chain hoist.
>> Designed to suit pipe beams
>> Compact and light weight with
powdercoated finish
84
order details | phone: 1300 363 152
SITECRAFT.COM.AU
Magnetic Lifter
The permanent magnetic lifter can be used in a variety of industries for
the transportation and lifting of steel, engine parts, semi manufactured
goods and moulds. Due to its magnetic force there is no need to use
slings or other holding devices eliminating damage to lifted goods.
>> The magnetic lifter’s highest pulling force is 3.5 times greater than the
working load limit
>> Lightweight
>> Safe, no electricity is needed to operate the magnetic lifter. Once
operated there is less than 1% residual magnetism
>> The simple switch and safety button design allows for one handed
operation
Note: The capacity of the lifting magnet is determined by the thickness
and surface quality of the component. Use of plate with high carbon
content will reduce the absorbability to less than 50% of rated capacity.
Model Capacity (kg) Cylindrical Carrying Capacity (kg) Weight (kg) Max Breakaway Force (kg)
6041182 100 50 3 350
6041183 300 150 10 1050
6041184 600 300 24 2100
6041185 1000 500 50 3500
6041186 2000 1000 125 7000
6041187 3000 1500 240 10500
6041188 6000 3000 440 21000
86
order details | phone: 1300 363 152
SITECRAFT.COM.AU
Portable Hoist
The Portable Hoist is a compact portable electric chain hoist. Being
light weight the portable hoist conveniently fits in its own durable
travel case making it the ideal portable solution for safe lifting,
lowering and handling heavy loads up to 250kg.
>> 240 Volt single phase operation
>> Overload limited clutch plus upper and lower limit switches for
extra safety
>> Ergonomic low voltage IP65 pendant with dual speed and
variable low speed control including emergency stop
>> Standard 6 metre height of lift with 5 metre pendant control,
chain bucket and 3 metre power cord
>> Upper and lower electrical limit switches
88
order details | phone: 1300 363 152
SITECRAFT.COM.AU
Workstation Cranes
One of the most efficient ways to reduce workplace manual
handling whilst retaining floor space and layout flexibility is by
installing an overhead workstation crane system.
Stockchaser
The stock to dock solution
The Stockchaser is a cost-effective solution that will improve
efficiency in any warehousing application. This unique narrow aisle,
highly manoeuvrable vehicle provides an ergonomic advantage to
the operator
by bringing him closer to the material that needs to be picked.
Note: Sitecraft can design and supply a range of towable trailers to suit both the Mule and Stockchaser. Details are available on request.
90
order details | phone: 1300 363 152
SITECRAFT.COM.AU