Professional Documents
Culture Documents
Pipe MFG Process PDF
Pipe MFG Process PDF
Manufacturing Process
WALL THICKNESS
mm
1.00 1.20 1.50 1.80 2.00 2.20 2.50 3.00 3.50 4.00 4.50 5.00 5.50 6.35 7.00 7.50 8.00 9.52 10.00 11.50 12.00 12.70 14.00 15.87 19.05 22.22 25.40 28.25 31.75 34.92 38.10 41.27 45.00
0.472
DIAMETER
12.00
14.00 0.551
15.00 0.591
16.00 0.630
18.00 0.709
20.00 0.787
22.00 0.866
25.40 1.000
26.00 1.024
28.57 1 1/8
CASING TUBING 30.00 1.181
1 1/4
31.75
34.93 1 3/8
38.10 1 1/2
Not treated Not treated 41.27 1 5/8
44.45 1 3/4
L1 47.62 1 7/8
MPM L2
SS MPM SRM TUBL www.tenaristamsa.com 50.80
53.97
2.000
2 1/8
SS L3 57.15 2 1/4
60.32 2 3/8
PM PIL 63.50 2 1/2
69.85 2 3/4
73.02 2 7/8
Treated Treated
L1
Commercial Contacts Customer Service Centers 76.20
82.55
3.000
3 1/4
MPM HT2 88.90 3 1/2
L2 95.25 3 3/4
SS L3 UT SS MPM SRM HTT TUBL 101.60 4.000
107.95 4 1/4
PM HT1 PIL Oil & Gas Industry Automotive Industry Monterrey Ciudad del Carmen 114.30 4 1/2
Luis Miguel Heredia Ricardo Baez Victor Palencia Cesar Gutierrez 120.65 4 3/4
127.00 5.000
lmheredia@tamsa.com.mx rbaez@tenaris.com vpalencia@tamsa.com.mx cgutierrez@tamsa.com.mx
Upsetting Treatment Upsetting Treatment (52) 229 989 1968 tel (52) 55 5282 9943 tel (52) 938 382 7873 tel
133.35
139.70
5 1/4
5 1/2
(52) 229 989 1911 tel 146.05 5 3/4
HT1 TUBL (52) 229 989 1119 fax (52) 229 989 1600 ext. 2404 fax (52) 55 5282 9966 fax (52) 938 382 7873 fax 152.40 6.000
158.75 6 1/4
SS MPM COU HT1 L3 SS MPM SRM COU 161.92 6 3/8
Engineering and Guadalajara Villahermosa 165.10 6 1/2
HTT L3 Construction Projects Industrial Applications
Ruben Villa David Galicia 168.27 6 5/8
DIAMETER
457.20 18.000
473.07 18 5/8
498.47 19 5/8
The TenarisTamsa manufacturing center has an integrated cycle. in the bar continuous-casting process, guarantees the production Tubos de Acero de México, S.A. has produced this catalogue only and exclusively for general informational purposes, and assumes no responsibility whatsoever for any error or omission in the 508.00
533.40
20.000
21.000
information contained herein, nor is responsible for any losses or damages, according to articles 2108, 2109, and 2110 of the Federal Civil Code of the United Mexican States or corresponding codes
Scrap and sponge iron are used to produce high-quality steel for sub- of ultra-clean steel. 0.039 0.047 0.059 0.071 0.079 0.087 0.098 0.118 0.138 0.157 1.177 0.197 0.217 0.250 0.276 0.295 0.315 0.375 0.394 0.453 0.472 0.500 0.551 0.625 0.750 0.875 1.000 1.112 1.250 1.375 1.500 1.625 1.772
of the states of Mexico, including, but not limited to, any damages or loss of income of any kind that they may caused. Accordingly, the content of this catalogue is presented on an as-is basis, and in
sequent processing, resulting in pipes of internationally competitive should not be presumed to constitute a guarantee of any kind. WALL THICKNESS
quality that comply with the most demanding standards. Complete automation of all processes, including heat treatment, and
COLD-DRAWN PIPE COLD-DRAWN PIPE OR HOT-ROLLED HOT-ROLLED PIPE
non-destructive inspection guarantee outstanding process control,
The use of state-of-the-art steel technology, such as vacuum quality and dimensional precision of all TenarisTamsa products.
degassing (VD), vibro-molding and electromagnetic steering Km 433.7 Carr. Mexico-Veracruz Via Xalapa (91697) Veracruz, Ver. Mexico Note: For other measurements produced in other Tenaris manufacturing centers, please ask for information from the commercial contacts.
© 2006 Tubos de Acero de México, S.A. All rights reserved Tenaris Marketing Communications Rev. 00 – May ´06
Hot Rolling Pipe Manufacturing Process 1. STEEL SHOP 3. HEAT TREATMENT LINES
STEEL SHOP HEAT TREATMENT LINE 1
Electric Arc Furnace >> Pouring >> Ladle Furnace >> Vacuum Degassing >> Continuous Casting /
Pouring Bar Cutting >> Bars /
Ingots Austenizing Furnace >> Radial Quenching Head >> Tempering Furnace >> Resizing Machine >> Cooling Bed >> Non Destructive Testing >> End Cropping >> Wet Magnetic Particle Inspection
2. ROLLING MILLS
CONTINUOUS MULTI-STAND PIPE ROLLING MILL
Bar Cropping into Billets >> Rotary Furnace >> De-Scaling >> Piercing Mill >> Multi-stand Mandrel Pipe Mill >> Extractor >> Sizing Mill >> Isotope Measuring System >> Hot Cutting >> Cooling Bed
6. FINISHING LINES
LINE 1
Weighing, Measuring
Straightening Machine >> Non Destructive Testing >> End Cropping >> Full Length Drift Test >> Threading >> Dimensional Control >> Wet Magnetic Particle Inspection >> Coupling Make-up >> Full Length Drift Test >> Hydrostatic Testing >> Threading >> Dimensional Control >> Wet Magnetic Particle Inspection >> and Marking Machine >> Varnishing >> *Ultrasonic Testing
LINE 2
Straightening Machine >> Non Destructive Testing >> End Cropping >> Hydrostatic Testing >> Full Length Drift Test >> End Cropping >> Threading >> Dimensional Control >> Wet Magnetic Particle Inspection >> Coupling Make-Up >> Full Length Drift Test >> Weighing, Measuring and Marking Machine >> Varnishing >> *Ultrasonic Testing
* Ultrasonic Testing (UT) is an optional inspection process that can be performed depending on the dimensions of the pipe and the customers’ specifications.