Inner Ring with reduced Curvature ratio (1.03x Ball dia) than existing Inner Ring with D-type Chord on Curvature RIC is C3, Tight Fit on both Rings, as both rings are rotating. (+6~+26um on Shaft OD& -83 ~ -113um on Aluminium housing bore) Seal grove is as same as existing design Seal Stack up & interference comparison is yet to be completed Grease is of PTFE thickner +PAO base oil combination (Krytox GPL225 or Kluber BHP 72-102) Grease fill volume is lesser than 25% of Swept volume in line with BM Seal Material is FKM Grade – 4. (Existing FKM seal is (6005LLUA1 for M&M) is FKM Grade – 2, but in FTIR analysis, existing FKM Grade -2 is having 84% co-relation only)