Professional Documents
Culture Documents
ABB Automation Technology Products AB Robotics: TSG - WW - SDK 9: A: Drive Is Constantly Accessed When The VC Is Running
ABB Automation Technology Products AB Robotics: TSG - WW - SDK 9: A: Drive Is Constantly Accessed When The VC Is Running
Robotics
Created by: Approved by: Versioin
Version: 4.X
On systems that have a large number of physical and logical drives (>10), users may
experience continuous access of the A: drive when the Virtual Controller is running.
This symptom occurs when the total number of drives is greater than 10 because of a limitation
in the VC’s ability to recognize more than 10 drives.
As a workaround, disconnect mapped network drives (if possible) until less than 10 total drives
are connected.
If you have any further questions, please contact your local ABB Support Center
or ABB Robotics Software Support phone: +46-31-773 8590,
e-mail: support_software.serop@se.abb.com