Professional Documents
Culture Documents
com/revit
Consultant
Address
Address
Address
Phone
Consultant
Address
Address
Address
Phone
Consultant
Address
Address
Address
Phone
Consultant
Address
Address
Address
3D View 2_2 Phone
1
12" = 1'-0"
Chick Fil A
Consultant
Address
Address
Address
Phone
Spencer Hale
Chick-fil-a
3D View 1_1
3
12" = 1'-0"
Cover Sheet
5/4/2020 10:18:17 PM
12" = 1'-0" Checked By Checker
G001
Scale 12" = 1'-0"
www.autodesk.com/revit
Consultant
Address
Address
Address
Phone
Consultant
Address
Address
Address
Phone
Consultant
Address
Address
Address
Phone
Consultant
Address
Address
Address
Phone
Consultant
Address
Address
Address
Phone
Spencer Hale
Chick-fil-a
General Notes
5/4/2020 10:18:17 PM
Checked By Checker
Scale
G002
www.autodesk.com/revit
Consultant
Address
Address
Address
Phone
Consultant
Address
Address
Address
Phone
Consultant
Address
Address
Address
Phone
Consultant
Address
Address
Address
Phone
Consultant
Address
Address
Address
Phone
Spencer Hale
Chick-fil-a
Life Safety Plan
5/4/2020 10:18:17 PM
Checked By Checker
G003
Scale 1/4" = 1'-0"
1. CONTRACTOR TO REFER TO RESPONSIBILITY MATRIX ON SHEET G-004.
2. DO NOT SCALE DRAWINGS- WRITTEN DIMENSIONS TAKE PRECEDENT.
3. IN CASE OF DISCREPANCIES OR CONFLICTS, NOTIFY ARCHITECT BEFORE
PROCEEDING WITH ANY WORK.
4. THESE DOCUMENTS HAVE BEEN PREPARED EXPRESSLY BY ARCHITECT FOR THE
CONTRACTOR. ANY ADDITIONAL USE FOR ANY OTHER REASON MUST BE
AUTHORIZED IN WRITING BY ARCHITECT.
5. SIGNAGE AND CANOPIES AS SHOWN IN THESE DRAWINGS IS SCHEMATIC ONLY FOR
ILLUSTRATION PURPOSES AND DOES NOT IMPLY OR DESCRIBE ANY MEANS,
METHODS, OR DETAILS PERTAINING TO INSTALLATION.
A. IT SHALL BE SOLELY THE SIGN CONTRACTOR'S RESPONSIBILITY TO DESIGN,
FABRICATE, AND INSTALL THE SIGN UNDER SEPARATE PERMIT. ANY AND ALL
STRUCTURAL CONSIDERATIONS SHALL BE COORDINATED BETWEEN THE SIGNAGE
CONTRACTOR, OWNER, AND HIS DESIGN PROFESSIONALS. THE SIGN CONTRACTOR
SHALL SUBMIT SHOP DRAWINGS DESCRIBING THE SIGNAGE DESIGN INCLUDING
FINISHES, COLORS, AND DESIGN DIMENSIONS TO THE OWNER FOR DESIGN INTENT
www.autodesk.com/revit
REVIEW ONLY PRIOR TO SIGN FABRICATION.
B. IT SHALL BE SOLELY THE CANOPY SUPPLIER'S RESPONSIBILITY TO DESIGN,
FABRICATE, AND INSTALL THE CANOPY UNDER SEPARATE CONTRACT. ANY AND ALL
STRUCTURAL CONSIDERATIONS SHALL BE COORDINATED BETWEEN THE CANOPY
CONTRACTOR, OWNER, AND HIS DESIGN PROFESSIONALS. THE CANOPY CONTRACTOR
SHALL SUBMIT SHOP DRAWINGS DESCRIBING THE CANOPY DESIGN INCLUDING
Consultant
FINISHES, COLORS, AND DESIGN DIMENSIONS TO THE OWNER FOR DESIGN INTENT
Address
REVIEW ONLY PRIOR TO FABRICATION.
Address
6. DRAWINGS AS LISTED IN THE DRAWING INDEX AND CONTRACT FOR CONSTRUCTION
Address
CONSTITUTES THE INSTRUMENTS OF SERVICE AND IS CONSIDERED A SINGLE
Phone
ENTITY. THE CONTRACTOR IS THEREFOR BOUND BY ALL INFORMATION INCLUDED.
7. ONLY DRAWINGS MARKED "ISSUED FOR CONSTRUCTION" BY ARCHITECT/ENGINEER
SHALL BE USED AS A BASIS FOR CONSTRUCTION.
8. SPRINKLER REQUIREMENTS, WHEN REQUIRED; REFER TO FIRE NOTES LOCATED ON Consultant
G-002 LIFE SAFETY PLAN. Address
9. PRIOR TO PROCEEDING WITH ANY WORK, CONTRACTOR TO VERIFY ALL EXISTING Address
CONDITIONS IN FIELD AND NOTIFY THE ARCHITECT IN CASE OF DISCREPANCIES. Address
10. IT SHALL BE THE RESPONSIBILITY OF THE CONTRACTORS TO COORDINATE WITH Phone
OTHER SUBCONTRACTORS/TRADES. FAILURE TO DO SO WILL NOT CONSTITUTE
GROUNDS FOR CHANGE ORDER.
11. ALL WORK SHALL BE SUBJECT TO FINAL INSPECTION BY THE ARCHITECT AND
ACCEPTANCE BY THE OWNER. Consultant
12. CONTRACTOR SHALL TAKE RESPONSIBILITY FOR ALL SUBCONTRACTORS TO OBTAIN Address
PROPER INSURANCE CERTIFICATES PRIOR TO COMMENCEMENT OF WORK. DELAYS Address
AND PENALTIES DUE TO SUCH FAILURE SHALL BE INCURRED BY CONTRACTOR. THERE Address
CAN BE NO PENALTY ON THE OWNER. Phone
13. THE SIZE AND LOCATION OF ALL EQUIPMENT PADS & PENETRATIONS THROUGH THE
STRUCTURE SHALL BE VERIFIED BY THE MECHANICAL, ELECTRICAL, AND PLUMBING
CONTRACTORS. ALL PENETRATIONS SHALL BE SUBJECT TO APPROVAL BY THE
ARCHITECT/ENGINEER. Consultant
14. ANY ITEM OF WORK NECESSARY FOR COMPLETION OF CONSTRUCTION, WHICH IS Address
NOT SPECIFICALLY COVERED ON THE DRAWINGS OR IN THE SPECIFICATIONS, SHALL Address
BE CONSIDERED INCLUDED IN THIS WORK AND SHALL BE PERFORMED IN A MANNER Address
DEEMED GOOD PRACTICE OF THE TRADE INVOLVED. Phone
15. WHERE DUCTS, PILES, OR CABLES PENETRATE FIRE-RATED PARTITIONS, PROVIDE
FIRESTOP MATERIAL.
MOLD AND MILDEW Consultant
1. IF CONTRACTOR DISCOVERS MOLD OR MILDEW AT ANY TIME DURING THE WORK, Address
CONTRACTOR TO IMMEDIATELY INFORM THE OWNER AND ARCHITECT IN WRITING. Address
2. CONTRACTOR SHALL RETAIN A CERTIFIED MOLD AND MILDEW TESTING AGENCY TO Address
PERFORM INVESTIGATION AND TESTING AS REQUIRED TO EVALUATE THE NATURE AND Phone
EXTENT OF THE PROBLEM. IF TESTS CONFIRMS HAZARDOUS CONDITION, THE
CONTRACTOR SHALL OBTAIN A MINIMUM OF 2 BIDS FROM COMPANIES QUALIFIED AND
LICENSED TO PERFORM REMEDIATION WORK. REIMBURSEMENT OF REMEDIATION
WORK TO BE DETERMINED BY THE OWNER AND ARCHITECT BEFORE CONTRACTOR
BEGINS REMEDIATION WORK.
3. CONTRACTOR TO PROVIDE A MOISTURE PROTECTION PLAN TO AVOID TRAPPING
WATER IN FINISHED WORK. CONTRACTOR TO DOCUMENT VISIBLE SIGNS OF MOLD
THAT MAY APPEAR DURING WORK.
4. EXPOSED CONSTRUCTION: BEFORE INSTALLATION OF WEATHER BARRIERS, WHEN
MATERIALS ARE SUBJECT TO WETTING AND EXPOSURE TO AIRBORNE MOLD SPORES,
PROTECT MATERIALS FROM WATER DAMAGE AND KEEP ORGANIC MATERIALS FROM
COMING INTO PROLONGED CONTACT WITH CONCRETE, REMOVE ALL STANDING
WATER AND KEEP DECKS FROM PONDING, ALL DECK OPENINGS ARE TO BE COVERED.
5. PARTIALLY ENCLOSED CONSTRUCTION: AFTER INSTALLATION OF WEATHER
BARRIERS BUT BEFORE FULL ENCLOSURE AND CONDITIONING OF BUILDING, WHEN
INSTALLED MATERIALS ARE STILL SUBJECT TO INFILTRATION OF MOISTURE AND No. Description Date
AMBIENT MOLD SPORES, DO NOT LOAD POROUS MATERIALS OR COMPONENTS INTO
THE BUILDING, KEEP INTERIOR SPACES REASONABLY CLEAN AND PROTECTED FROM
WEATHER, REMOVE CELLULOSE AND ORGANIC MATTER PERIODICALLY, DISCARD ALL
WATER-DAMAGED MATERIAL, DISCARD ANY MATERIAL WITH MOLD GROWTH.
SEQUENCE WORK THAT ALLOWS ANY WET MATERIALS TO DRY BEFORE ENCLOSING.
6. CONTROLLED CONSTRUCTION PHASE: AFTER COMPLETING AND SEALING OF WORK
BUT PRIOR TO FULL OPERATION OF PERMANENT H.V.A.C. SYSTEMS, CONTROL
MOISTURE AND HUMIDITY INSIDE TO AN EFFECTIVE DRY-IN CONDITION. USE
PERMANENT H.V.A.C. SYSTEM TO CONTROL HUMIDITY. COMPLY WITH
MANUFACTURER'S WRITTEN INSTRUCTIONS FOR TEMPERATURE, RELATIVE HUMIDITY,
AND EXPOSURE TO WATER LIMITS. REMOVE MATERIALS THAT CANNOT BE
COMPLETELY RESTORED TO MANUFACTURED MOISTURE LEVEL WITHIN 48 HOURS.
Spencer Hale
Chick-fil-a
Arch General Notes
5/4/2020 10:18:09 PM
Checked By Checker
Scale
A001
T.O. High Plate
21' - 8"
www.autodesk.com/revit
Roof
14' - 6"
Consultant
Acoustic Ceiling Tile 24 x 24 Address
Header
10' - 2" Address
Address
Phone
Consultant
Address
Header Address
10' - 2" Address
Phone
Common brick
Air Consultant
Address
Plywood, sheathing grade
Address
Address
Phone
EIFS - Exterior Insulation
Consultant
Gypsum Wall Board
Address
Address
Level 1 Address
0' - 6" Phone
Level 1
T.O. Footing 0' - 6"
-3' - 0" Soil
B.O. Footing Cast-in-place concrete
-4' - 0"
T.O. Footing
No. Description Date
Section 6
1 -3' - 0"
1/2" = 1'-0"
B.O. Footing
-4' - 0"
Section 5
2
1/2" = 1'-0"
Spencer Hale
Chick-fil-a
Wall Sections
5/4/2020 10:18:09 PM
Checked By Checker
A002
Scale 1/2" = 1'-0"
www.autodesk.com/revit
16
Consultant
Address
Address
Address
Multipurpose Phone
8
14 Play Room
Consultant
4
Address
5
Service Address
13 Address
12
Phone
15 Closet Vestibule 2
9 3 Consultant
Address
Address
Address
Office 13 6 Phone
7
1
A301 Consultant
Address
Address
Address
Kitchen Phone
6 1
A601
Mens RR Consultant
11 Address
Address
Address
Phone
8
Closet10
12
Womens RR
10
1 2
A002 A601
Dining
5
No. Description Date
4
26
Serving
2
2 3
2 Vestibule 1
A002 1
7
Spencer Hale
Chick-fil-a
2
First Floor
A301
Reference
Project Number Project Number
Date 5/4/20
Drawn By Author
5/4/2020 10:18:10 PM
Checked By Checker
A101
Scale 1/4" = 1'-0"
www.autodesk.com/revit
Consultant
Address
Address
3' - 3 1/4"
Address
5' - 3"
Phone
6' - 11"
6' - 10"
3' - 0"
11' - 0"
Consultant
Address
Address
14' - 10"
2' - 8"
Address
2' - 4"
Phone
6' - 7 3/4"
18' - 11"
3' - 2"
Consultant
2' - 4" Address
Address
0' - 4" 3' - 7" Address
17' - 9" Phone
2' - 6"
Consultant
10' - 7"
Address
8' - 8"
Address
Address
Phone
3' - 8 3/4" 7' - 8 1/4" 7' - 8"
Consultant
Address
2' - 3" 5' - 0" 2' - 11" Address
26' - 11" 8' - 11"
Address
35' - 5"
Phone
4' - 0" 2' - 4" 5' - 8" 6' - 6"
8' - 3"
9' - 4"
11' - 10"
1' - 6"
4' - 0"
53' - 1"
9' - 4"
10' - 1"
No. Description Date
9' - 3"
7' - 4"
12' - 1" 0' - 8" 4' - 0" 0' - 2 2'
1/2"
- 1 1/2"
4' - 1 1/4"
9' - 4"
7' - 9 3/4"
6' - 4" 5' - 2" 1' - 2" 30' - 2 1/2" 11' - 7" 5' - 1" 10' - 6 1/2" 13' - 1"
19' - 8 3/4"
2' - 9"
12' - 1 1/2"
8' - 11 1/2"
2' - 2 1/2"
6' - 0"
EQ EQ
4' - 2" 9' - 4" 9' - 4"
7' - 9" Spencer Hale
2' - 0"
Chick-fil-a
42' - 8" 33' - 8" 12' - 0"
First Floor
Dimensions
Project Number Project Number
Date 5/4/20
Drawn By Author
5/4/2020 10:18:11 PM
Checked By Checker
A101D
Scale 1/4" = 1'-0"
1 Level 1 Dimensions
1/4" = 1'-0"
www.autodesk.com/revit
Coolers Consultant
Address
Address
Address
Phone
Deep Fryers
Consultant
Address
Address
Food Warmers Address
Phone
Consultant
Address
Address
Address
Phone
Walk in Coolers
Deep Fryers
Consultant
Address
Address
Address
Phone
Consultant
Address
Address
Address
Phone
Spencer Hale
Chick-fil-a
First Floor Furniture
Level 1 Furniture
1
1/4" = 1'-0"
5/4/2020 10:18:11 PM
Checked By Checker
A101F
Scale 1/4" = 1'-0"
www.autodesk.com/revit
Consultant
Address
Address
Address
Phone
Consultant
Address
Address
Address
Phone
Consultant
Address
Address
Address
Phone
Consultant
Address
1 Address
A301 Address
Phone
Consultant
1
Address
A601
Address
Address
Phone
2
A002
Spencer Hale
Chick-fil-a
Reflected Ceiling
Plan
2
A301
Project Number Project Number
Date 5/4/20
Drawn By Author
5/4/2020 10:18:12 PM
Checked By Checker
A103
Scale 1/4" = 1'-0"
Level 1
1
1/4" = 1'-0"
www.autodesk.com/revit
A201
Consultant
Address
Address
Address
Phone
Consultant
Address
Address
Address
Phone
Consultant
Address
Address
Address
Phone
Consultant
Address
Address
Address
Phone
1 Consultant
A301 Address
Address
Address
Phone
[No Slope]
A202 2 1 A202
Spencer Hale
Chick-fil-a
1
A201
1
Roof
1/8" = 1'-0"
Roof Plan
5/4/2020 10:18:12 PM
Checked By Checker
A104
Scale 1/8" = 1'-0"
42' - 8" 34' - 10" 12' - 0"
Roof www.autodesk.com/revit
14' - 6"
Common brick
1' - 9"
Level 1 Consultant
T.O. Foundation Address
0' - 6"
6' - 7" 9' - 8" 9' - 4" 9' - 4" 14' - 4" 10' - 10 1/2" 10' - 6 1/2" 13' - 1" 0' - 0" Address
Address
T.O. Footing Phone
Anodized aluminum, bronze -3' - 0"
B.O. Footing
-4' - 0" Consultant
Address
Address
Address
Phone
Consultant
Address
Address
South Address
1 Phone
3/16" = 1'-0"
Consultant
Address
Address
Address
Phone
11' - 11" 34' - 6" 36' - 10 3/4" 2' - 8" 3' - 6"
No. Description Date
Roof
14' - 6"
Common brick
6' - 8"
7' - 4"
1' - 9"
Level 1
T.O. Foundation
0' - 6"
0' - 0"
T.O. Footing
-3' - 0"
B.O. Footing
Spencer Hale
-4' - 0"
Chick-fil-a
2
North
Elevations
3/16" = 1'-0"
5/4/2020 10:18:13 PM
Checked By Checker
A201
Scale 3/16" = 1'-0"
www.autodesk.com/revit
1
A301
Consultant
Roof Address
14' - 6" Address
Address
Common brick Phone
Steel, mill finish Header
10' - 2"
Anodized aluminum, bronze Consultant
Address
Soda Lime Glass
Address
6' - 8" Address
Phone
1' - 9"
Level 1
T.O. Foundation Consultant
0' - 6"
0' - 0"
Address
9' - 4" 9' - 4" 9' - 4" 18' - 8 1/2" 5' - 10" Address
T.O. Footing
-3' - 0" Address
B.O. Footing Phone
-4' - 0"
Consultant
Address
Address
Address
1 East Phone
3/16" = 1'-0"
1
A301
6' - 3 1/4" 2' - 8" 35' - 5" 20' - 10 3/4" 2' - 0"
Roof
14' - 6"
4' - 8 1/4" Common brick Spencer Hale
Header
3' - 10 1/4" 10' - 2"
Steel, mill finish
6' - 0"
Paint finished steel
5/4/2020 10:18:14 PM
3/16" = 1'-0" Checked By Checker
A202
Scale 3/16" = 1'-0"
2
A301
Roof
14' - 6"
Consultant
Address
Address
Header Address
10' - 2" Phone
Consultant
10' - 0"
Address
Address
Address
Phone
Level 1 Consultant
T.O. Foundation
0' - 6"
0' - 0" Address
Address
Address
T.O. Footing Phone
-3' - 0"
B.O. Footing
-4' - 0"
Consultant
Address
Address
Address
Phone
1 Section 1
1/4" = 1'-0"
Consultant
Address
Address
Address
Phone
1
A301
2
A002
7' - 9" 13' - 9" 7' - 4" 5' - 6" 8' - 3" 8' - 8" 14' - 10"
Roof
14' - 6"
2 1
A601 A601
Header
10' - 2"
10' - 0"
Level 1
T.O. Foundation
0' - 6"
0' - 0"
T.O. Footing
-3' - 0"
B.O. Footing
-4' - 0" Spencer Hale
Chick-fil-a
Section 2
2
1/4" = 1'-0" Building Sections
5/4/2020 10:18:15 PM
Checked By Checker
A301
Scale 1/4" = 1'-0"
Door Schedule Window Schedule
Door Frame R.O. Glazing Head
vv Type Width Height Thickness Material Finish Under Cut Fire Rating Hardware Type Material Finish Jamb Head Comments Type Mark Width Height Type Manufacturer Model Material Finish Head Jamb Sill Thickness Type Height Comments
1 15 6' - 0" 7' - 0" 0' - 1 3/4" 26 4' - 9" 6' - 0" Window-Ca 9' - 0"
2 16 3' - 0" 7' - 0" 0' - 1 3/4" sement-Do
uble
3 16 3' - 0" 7' - 0" 0' - 1 3/4"
4 17 3' - 0" 6' - 8" 0' - 1 3/4"
5 16 3' - 0" 7' - 0" 0' - 1 3/4"
6 16 3' - 0" 7' - 0" 0' - 1 3/4"
7 16 3' - 0" 7' - 0" 0' - 1 3/4"
8 18 3' - 0" 6' - 8" 0' - 1 3/4"
9 18 3' - 0" 6' - 8" 0' - 1 3/4"
www.autodesk.com/revit
10 18 3' - 0" 6' - 8" 0' - 1 3/4"
12 18 3' - 0" 6' - 8" 0' - 1 3/4"
13 16 3' - 0" 7' - 0" 0' - 1 3/4"
14 19 3' - 0" 6' - 8" 0' - 1 3/4"
15 19 3' - 0" 6' - 8" 0' - 1 3/4" Consultant
16 20 4' - 0" 7' - 0" 0' - 1 3/4" Address
Address
Address
Phone
Consultant
Address
Address
Address
Phone
Consultant
Address
Address
Address
Phone
Consultant
Address
Address
Address
Phone
Consultant
Address
Address
Address
Phone
Room Schedule
Room Number Room Name Floor Finish Base Finish Wall Finish Ceiling Finish Ceiling Height Comments
1 Vestibule 1
3 Vestibule 2
4 Play Room
7 Office No. Description Date
8 Multipurpose
2 Serving
5 Dining
6 Kitchen
9 Closet
10 Womens RR
11 Mens RR
12 Closet
13 Service
6' - 4"
3' - 4" 4' - 4" 3' - 4" 3' - 4" 3' - 4"
Spencer Hale
2' - 10 1/4"
1' - 0"
2' - 1"
7' - 4"
7' - 4"
7' - 4"
7' - 0"
7' - 0"
7' - 0"
2' - 1" 0' - 5"
Anodized aluminum, bronze 0' - 8" 2' - 0"
Chick-fil-a
4' - 8"
2' - 2 1/4"
4' - 1"
3' - 7 3/4"
0' - 8" 2' - 0"
Soda Lime Glass
Schedules
0' - 10"
5/4/2020 10:18:15 PM
Paint finished steel Checked By Checker
A502
Doors
1/2" = 1'-0"
www.autodesk.com/revit
Header Header
10' - 2" 10' - 2"
2' - 3" 5' - 0" 2' - 11" 1' - 7" 2' - 1 1/2" Consultant
Address
Address
Address
Phone
Consultant
Address
Address
Address
Phone
Consultant
Address
Address
Address
Phone
Level 1 Level 1
0' - 6"
T.O. Foundation 0' - 6"
T.O. Foundation
0' - 0" 0' - 0"
Consultant
Address
Address
Address
Phone
Consultant
Address
Address
Address
Phone
Section 4
2
1/2" = 1'-0"
1 Section 3
1/2" = 1'-0"
Spencer Hale
Chick-fil-a
Interior Elevations
5/4/2020 10:18:16 PM
Checked By Checker
A601
Scale 1/2" = 1'-0"
Grey Birch x11
Golden Chain
Golden Chain x2
www.autodesk.com/revit
Consultant
Address
Address
Address
Phone
Consultant
Address
Address
Address
Phone
Consultant
Address
Address
Address
Phone
Consultant
Address
Address
Address
Phone
Grey Birch x3
Consultant
Grey Birch x3 Address
Address
Address
Phone
Scarlet Oak
Scarlet Oak
Spencer Hale
Chick-fil-a
Landcaping
5/4/2020 10:18:18 PM
Checked By Checker
L101
Scale 3/32" = 1'-0"
BUILDING STRUCTURE HAS BEEN DESIGNED TO
2. ALL CONSTRUCTION SHALL CONFORM TO THE APPLICABLE LOCAL BUILDING CODE.
3. VERIFY EXISTING CONDITIONS AND DIMENSIONS AND NOTIFY ARCHITECT OF ANY CONDITIONS WHICH DO
NOT COMPLY WITH PLANS AND SPECIFICATIONS. STRUCTURAL DRAWINGS MUST BE COORDINATED WITH
ARCHITECTURAL DRAWINGS BY THE CONTRACTOR.
4. CONTRACT DOCUMENTS SHALL NOT BE REPRODUCED FOR USE AS SHOP DRAWINGS.
5. THE STRUCTURE IS UNSTABLE UNTIL ALL LOAD BEARING WALLS ARE ERECTED AND STEEL MEMBERS
ARE ERECTED, CONNECTIONS ARE COMPLETELY BOLTED AND/OR WELDED AND INSPECTED, THE
PLYWOODDECK ATTACHED TO THE WOOD FRAMING (ROOF AND SHEAR WALLS), AND THE CONCRETE
FLOORS PLACED AND HAVE ATTAINED 75% OF 28-DAY STRENGTH. UNTIL SUCH TIME, TEMPORARY
BRACING IS REQUIRED. THE DESIGN ADEQUACY OF TEMPORARY BRACING AND SHORING IS THE SOLE
RESPONSIBILITY OF THE CONTRACTOR.
6. FOR LOCATION OF MISCELLANEOUS ITEMS (OPENINGS, BENT PLATES, INSERTS, ETC.) AFFECTING
STRUCTURAL WORK, SEE ARCHITECTURAL, MECHANICAL, PLUMBING AND ELECTRICAL DRAWINGS.
www.autodesk.com/revit
Consultant
Address
Address
Address
Phone
Consultant
Address
Address
Address
Phone
Consultant
Address
Address
Address
Phone
Consultant
Address
Address
Address
Phone
Consultant
Address
Address
Address
Phone
Spencer Hale
Chick-fil-a
Structural General
Notes
Project Number Project Number
Date 5/4/20
Drawn By Author
5/4/2020 10:18:18 PM
Checked By Checker
Scale
S101
www.autodesk.com/revit
Consultant
Address
Address
Address
Phone
Consultant
Address
Address
Address
Phone
Consultant
Address
Address
Address
Phone
Consultant
Address
Address
Address
Phone
Consultant
Address
Address
Address
Phone
40' - 4 1/2"
2' - 8"
2' - 8"
2' - 8"
2' - 8"
Spencer Hale
Chick-fil-a
Foundation
Structural First
1
1/4" = 1'-0"
Floor
Project Number Project Number
Date 5/4/20
Drawn By Author
5/4/2020 10:18:18 PM
Checked By Checker
S202
Scale 1/4" = 1'-0"
24K4
www.autodesk.com/revit
24K4
24K4
Consultant
Address
24K4 Address
24K4 Address
Phone
24K4
24K4
Consultant
24K4 Address
24K4 Address
Address
Phone
24K4
24K4
24K4
Consultant
24K4 Address
Address
Address
24K4 Phone
24K4
24K4
24K4 Consultant
Address
Address
24K4 Address
24K4
Phone
24K4
24K4
Consultant
Address
24K4 Address
24K4
Address
Phone
24K4
24K4
24K4
24K4
24K4
24K4
24K4
24K4
24K4
24K4
No. Description Date
24K4
24K4
24K4
24K4
24K4
24K4
24K4
24K4
24K4
24K4
24K4
24K4
24K4
Spencer Hale
Roof Framing
1
1/4" = 1'-0"
Chick-fil-a
Roof Framing
5/4/2020 10:18:19 PM
Checked By Checker
S204
Scale 1/4" = 1'-0"