This document lists jet sizes in both millimeters and inches along with the corresponding numbered drill bit size used to create each jet. It also provides the cross-sectional area in mm2 for each jet size. Jet sizes range from 0.66mm to 1.70mm in diameter and are generally drilled using bit sizes one size smaller than the jet diameter. Larger jet sizes often correspond to common fractional drill bit sizes like 1/32" or 1/16".
This document lists jet sizes in both millimeters and inches along with the corresponding numbered drill bit size used to create each jet. It also provides the cross-sectional area in mm2 for each jet size. Jet sizes range from 0.66mm to 1.70mm in diameter and are generally drilled using bit sizes one size smaller than the jet diameter. Larger jet sizes often correspond to common fractional drill bit sizes like 1/32" or 1/16".
This document lists jet sizes in both millimeters and inches along with the corresponding numbered drill bit size used to create each jet. It also provides the cross-sectional area in mm2 for each jet size. Jet sizes range from 0.66mm to 1.70mm in diameter and are generally drilled using bit sizes one size smaller than the jet diameter. Larger jet sizes often correspond to common fractional drill bit sizes like 1/32" or 1/16".