Professional Documents
Culture Documents
PVDF Section 324-357 - Pvdfcomplete PDF
PVDF Section 324-357 - Pvdfcomplete PDF
PVDF has excellent welding characteristics, and can be joined by either socket fusion
welding, butt fusion welding, non-contact Infra-Red (IR) welding or electrofusion
welding techniques. In addition, PVDF systems can be joined using flanges, threaded
connections and mechanical couplings.
PVDF piping systems are available from IPS in metric dimensions according to DIN
8077/8078 and DIN 16962.
Characteristics
General properties of pvdf
Chemical resistance
PVDF exhibits thermal stability up to 120°C, (short term
140°C for drainage systems). PVDF also has good impact PVDF has an outstanding resistance to inorganic and organic
strength, which rises further as the temperature increases. acids, oxidising media, aliphatic and aromatic hydrocarbons,
alcohols and halogenated solvents. PVDF is resistant to halogens,
Some important advantages of PVDF are: in particular bromine (but not fluorine) and to weak bases. It is
- Low specific weight of 1.78g/cm3 degraded by fuming sulphuric acid, some strong basic amines,
- Long-term creep resistance very high concentrated and hot alkalis as well as alkaline metals.
- Chemical resistance is excellent PVDF swells in high-polar solvents such as acetone and ethyl
- High resistance to thermal ageing acetate. It is also slightly soluble in aphoristic solvents, for
- Outstanding welding characteristics example dimethyl formamide and dimethyl sulphide.
- Excellent abrasion resistance
- Smooth internal surfaces
- Excellent resistance against UV ageing
Weathering resistance
- Wide temperature range Piping systems in PVDF are resistant to UV, and therefore they do
(between -40°C to +140°C) not need to be protected against degradation when used
outdoors.
Properties of PVDF (Average values)
Electrical characteristics
Property Value
Density 1.78 g/cm3 PVDF is non-conductive, therefore systems will remain free from
electrolytic corrosion. Precautions should be taken to avoid static
Tensile Strength >50 MPa discharge should any part of a PVDF piping system pass through
Elongation at Break 80% an area where explosive gases may be present.
The pressure ratings for PVDF pipes according to ISO 10931-2 and PVDF fittings according to ISO 10931-3 are defined by the
‘nominal pressure’ method, whereby pipes, fittings and valves are grouped together according to a single nominal pressure rating.
The PN rating is the maximum permitted operational pressure in bars calculated at 20°C, for example PN6 indicates a maximum
working pressure of 6 bars. According to this method the pressure ratings of PVDF pipes and fittings according to the nominal
pressure system is as follows:-
Welding equipment is available for sale or hire - see Tools and Installation Equipment.
pipes and fittings
Wall Wall
Size (mm) kg/m Code Price/m (mm) kg/m Code Price/m
20 - - - - 1.9 0.21 30 705 0020 21 20.82
25 - - - - 1.9 0.27 30 705 0025 21 26.63
32 - - - - 2.4 0.44 30 705 0032 21 43.55
40 - - - - 2.4 0.55 30 705 0040 21 54.48
50 - - - - 3.0 0.85 30 705 0050 21 84.19
63 2.5 0.93 30 705 0063 33 91.88 3.0 1.09 30 705 0063 21 107.73
75 2.5 1.11 30 705 0075 33 109.64 3.6 1.55 30 705 0075 21 153.16
90 2.8 1.48 30 705 0090 33 146.16 4.3 2.22 30 705 0090 21 219.42
110 3.4 2.20 30 705 0110 33 217.70 5.3 3.32 30 705 0110 21 327.81
125 3.9 2.84 30 705 0125 33 280.88 6.0 4.24 30 705 0125 21 419.16
140 4.3 3.52 30 705 0140 33 348.32 6.7 5.31 30 705 0140 21 524.14
160 4.9 4.54 30 705 0160 33 489.15 7.7 6.96 30 705 0160 21 749.52
180 5.5 5.74 30 705 0180 33 618.92 8.6 8.74 30 705 0180 21 942.47
200 6.2 7.19 30 705 0200 33 775.13 9.6 10.83 30 705 0200 21 1157.58
225 6.9 8.95 30 705 0225 33 964.66 10.8 13.67 30 705 0225 21 1473.43
250 7.7 11.10 30 705 0250 33 1195.13 11.9 16.73 30 705 0250 21 1802.96
280 8.6 13.90 30 705 0280 33 1493.93 13.4 21.11 30 705 0280 21 2298.08
315 9.7 17.60 30 705 0315 33 1890.03 - - - -
355 10.8 22.00 30 705 0355 33 2369.80 - - - -
400 12.2 28.00 30 705 0400 33 3018.59 - - - -
Standard length 5m
Please note that a transportation surcharge may be applied on pipe diameters 250mm or larger -
please enquire for details
HPF
Electrofusion
Socket Size Code Price
20 35 073 0020 21 14.19
25 35 073 0025 21 14.91
32 35 073 0032 21 15.96
40 35 073 0040 21 17.41
50 35 073 0050 21 18.61
63 35 073 0063 21 23.90
AGRU CAD contains the full AGRU range in PP, PVDF and
ECTFE.
Pipe Availability
We typically hold over
195,000 metres of pipe
in stock for immediate despatch
socket fusion fittings
mm sizes
Tee 90˚ Cap
Size Code Price Size Code Price
16 30 056 0016 07 8.56 16 30 054 0016 07 6.15
20 30 056 0020 07 10.10 20 30 054 0020 07 6.91
25 30 056 0025 07 12.22 25 30 054 0025 07 8.12
32 30 056 0032 07 17.92 32 30 054 0032 07 9.66
40 30 056 0040 07 27.83 40 30 054 0040 07 16.66
50 30 056 0050 07 41.99 50 30 054 0050 07 21.03
63 30 056 0063 07 66.23 63 30 054 0063 07 31.58
75 30 056 0075 07 124.98 75 30 054 0075 07 34.66
90 30 056 0090 07 192.09 90 30 054 0090 07 45.60
110 30 056 0110 07 256.10 110 30 054 0110 07 65.73
Male Adaptor
Union BSP or NPT male Size Code Price
FPM O-Rings Size Code Price threaded 20 x 3/ 4 30 035 2025 07 9.11
20 30 024 1120 07 24.26 25 x 1 30 035 2532 07 13.91
25 30 024 1125 07 30.74 32 x 11/ 4 30 035 3240 07 16.92
32 30 024 1132 07 37.76 40 x 11/ 2 30 035 4050 07 25.78
40 30 024 1140 07 52.57 50 x 2 30 035 5063 07 32.95
50 30 024 1150 07 73.25 Code shown is for BSP
63 30 024 1163 07 109.26 Code for NPT on request
Maximum Pressure PN10.
socket fusion flanges
Pressure Ratings
mm sizes
Tee 90˚ PN10 (SDR 33) PN16 (SDR 21)
Size Code Price Code Price Code Price
20 - - - - 30 006 0020 21 8.87
25 - - - - 30 006 0025 21 11.20
32 - - - - 30 006 0032 21 16.15
40 - - - - 30 006 0040 21 25.61
50 - - - - 30 006 0050 21 28.34
63 - - - - 30 006 0063 21 60.27
75 - - - - 30 006 0075 21 114.90
90 - - 30 006 0090 33 167.50 30 006 0090 21 197.20
110 - - 30 006 0110 33 187.81 30 006 0110 21 245.01
125 - - 30 006 0125 33 311.62 30 006 0125 21 423.42
140 - - 30 006 0140 33 343.17 30 006 0140 21 470.38
160 - - 30 006 0160 33 432.84 30 006 0160 21 540.38
180 - - 30 006 0180 33 482.33 30 006 0180 21 655.62
200 - - 30 006 0200 33 571.97 30 006 0200 21 777.69
225 - - 30 006 0225 33 733.31 30 006 0225 21 1002.20
250 - - 30 006 0250 33 913.44 30 006 0250 21 1864.41
280 - - 30 006 0280 33 1297.59 30 006 0280 21 2373.21
315 - - 30 006 0315 33 1683.44 - -
Fast Delivery
We deliver using our own
dedicated vehicles or next day
carrier. Using our standard
delivery service you can expect to
receive your order within 24 hours
- to your warehouse, factory or
job-site
fusion spigot fittings
Technical Resources
Register online for our technical catalogue
www.ipsflowsystems.com
Or call our technical team on:
0800 975 79 71
fusion spigot fittings
Restrained
Fitting PN10 (SDR 33) PN16 (SDR 21)
Provides anchor point in Size Code Price Code Price Code Price
pipe runs
32 - - - - 30 028 0032 21 24.41
63 - - - - 30 028 0063 21 51.22
90 - - 30 028 0090 33 118.67 30 028 0090 21 125.85
110 - - 30 028 0110 33 175.86 30 028 0110 21 186.96
125 - - 30 028 0125 33 264.64 30 028 0125 21 275.74
140 - - 30 028 0140 33 312.45 30 028 0140 21 327.81
160 - - 30 028 0160 33 402.92 30 028 0160 21 421.68
Requires a correctly
sized retaining clip.
See below.
Retaining
Clip Size Code Price
For restrained fitting 63* 14 049 0063 00 10.66
90* 14 049 0090 00 12.80
110* 14 049 0110 00 13.80
125* 14 049 0125 00 15.20
140* 14 049 0140 00 25.60
160* 14 049 0160 00 27.92
Free Training
We can provide free installer
training either on site or at our
bespoke training facility.
Contact Tony Charlton or
Tom Tate on:
0800 975 79 71
fusion spigot flanges
Materials
Body - PVDF
Ball Seat - PTFE
Seals - FPM
Sizes
3/8" - 4"/16mm - 110mm
Pressure Rating
Features
3/8"/16mm to 2.1/2"/75mm - 16 bar
• Lockable Handle (Lock not supplied) 3"/90mm - 10 bar
• True Union design for easy maintenance 4"/110mm - 6 bar
• Full bore design
• Tagging point included Connections
• Matched Valve bracket for panel mounting and retrofit actuation.
• Pneumatically and Electrically actuated versions available MM fusion sockets
• Silicone free on request MM fusion spigots
BSP female thread
Flanged PN10
Valve Dimensions
d 16 20 25 32 40 50 63 75 90 110
DN 10 15 20 25 32 40 50 65 80 80
G 3/8" 1/2" 3/4" 1" 11/4" 11/2" 2" 21/2" 3 4
L 114.0 124.0 144.0 154.0 174.0 194.0 224.0 284.0 300.0 340.0
L1 120.0 130.0 150.0 160.0 180.0 200.0 230.0 290.0 310.0 350.0
A 62.0 62.0 69.0 73.0 83.0 94.0 108.0 133.0 160.0 160.0
Z 70.0 67.0 79.0 83.0 95.0 114.0 134.0 147.0 211.0 167.0
t 14.5 16.0 17.0 19.5 22.0 25.0 29.0 34.5 38.5 44.0
D 51.8 51.8 61.5 68.5 83.5 98.0 118.0 151.0 183.0 183.0
H 71.5 71.5 77.0 80.5 98.5 106.5 115.5 142.0 160.0 160.0
B 40.0 40.0 51.5 51.5 64.0 73.0 85.0 110.0 132.0 132.0
PN 16 16 16 16 16 16 16 16 10 6
manual valves
FPM Seals Size Code Price FPM Seals Size Code Price
PTFE Seats 16 12.1449 94.59 PTFE Seats 16 12.2259 94.59
20 12.1450 96.12 20 12.1491 96.12
25 12.1448 123.94 25 12.1492 123.94
32 12.1451 158.46 32 12.1493 158.46
40 12.1452 210.01 40 12.1494 210.01
50 12.1453 297.94 50 12.1495 297.94
63 12.1454 412.31 63 12.1496 412.31
75 12.1455 705.14 75 12.1497 705.14
90 12.1456 937.35 90 12.1498 937.35
110 12.2032 1388.07 110 12.2012 1388.07
FPM Seals Size Code Price FPM Seals Size Code Price
PTFE Seats 3/ 8 12.2093 101.26 PTFE Seats 1/ 2 12.2025 186.10
1/ 2 12.1482 102.96 3/ 4 12.2026 266.32
3/ 4 12.1483 132.84 1 12.2027 327.81
1 12.1484 168.18 11/ 4 12.2502 417.45
11/ 4 12.1485 221.11 11/ 2 12.2503 578.80
11/ 2 12.1486 313.30 2 12.2504 773.44
2 12.1487 433.67 21/ 2 12.2505 1304.42
21/ 2 12.1488 792.21 3 12.2506 1833.69
3 12.2349 1217.87
FPM Seals Size Code Price FPM Seals Size Code Price
PTFE Seats 16 124918 232.20 PTFE Seats 16 124920 232.20
20 124922 248.43 20 124924 248.43
25 125030 307.31 25 125034 307.31
32 124926 385.88 32 124928 385.88
40 125032 466.99 40 125036 466.99
50 124930 578.80 50 124932 578.80
63 124934 809.28 63 124936 809.28
FPM Seals Size Code Price FPM Seals Size Code Price
PTFE Seats 16 124919 232.20 PTFE Seats 16 124921 232.20
20 124923 248.43 20 124925 248.43
25 125031 307.31 25 125035 307.31
32 124927 385.88 32 124929 385.88
40 125033 466.99 40 125037 466.99
50 124931 578.80 50 124933 578.80
63 124935 809.28 63 124937 809.28
Hose Nozzle
Size Code Price
1
BSP Male /4 141.145 13.85
1
NPT Male /4 140.205 13.85
General
Sealing material: EPDM / EPDM-PTFE /
FPM
Body material: PVDF
Dimensions: DN 15/d 20 - DN125/d140
Operating Pressure
DN 15 / 1/ 2" - DN 125 / 5" 10 bar
Connections
PVDF union sockets 20mm-63mm
PVDF fusion spigots 20mm-110mm
Flanged PN10 20mm-140mm
Technical Specification
Features For example:
TYPE PRAHER, DIN 2403
• Safety gear wheel PVDF Diaphragm valve T4 DN 15 d20
• Corrosion Resistant PVDF mm fusion spigot
• Maintenance free operation over a long working life Sealing material EPDM-PTFE
• Suitable for aggressive and dirty media Safety gear wheel
• Radial installation or removal Max. Operating pressure 10 bar
• Easy replacement of the diaphragms
Valve Dimensions
DN 15 - DN 50 DN 65 - DN 80
d 20 25 32 40 50 63 75 90 110 140
DN 15 20 25 32 40 50 65 80 100 125
G 1/ 2" 3/ 4" 1" 11/ 4" 11/ 2" 2" 21/ 2" 3" 4" 5"
M 16.5 16.5 20.1 31.5 31.5 38.6 25.0 25.0 25.0 25.0
H 100.0 100.0 107.0 144.0 144.0 170.0 260.0 260.0 330.0 330.0
B 86.0 86.0 86.0 136.0 136.0 136.0 234.0 234.0 234.0 234.0
F 24.5 24.5 24.5 43.5 43.5 43.5 - - - -
Lift 9.0 9.0 11.0 22.0 22.0 28.0 35.0 35.0 45.0 45.0
K M6 M6 M6 M8 M8 M8 - - - -
L 124.0 144.0 154.0 174.0 194.0 224.0 284.0 300.0 340.0 -
L1 130.0 150.0 160.0 180.0 200.0 230.0 - 310.0 350.0 400.0
T 12.0 12.0 12.0 15.0 15.0 15.0 - - - -
t 28.5 36.0 36.0 38.5 46.0 46.0 37.0 37.0 50.0 -
PN 10 10 10 10 10 10 10 10 10 10
Dimensions in mm
manual valves
PTFE Diaphragm Size Code Price PTFE Diaphragm Size Code Price
20 12.2798 207.44 1/ 2/20 12.0261 236.49
25 12.2799 221.96 3/ 4/25 12.0265 237.32
32 12.2800 257.82 1/32 12.0270 284.28
40 12.2801 383.31 11/ 4/40 12.0271 429.43
50 12.2802 420.87 11/ 2/50 12.0272 466.99
63 12.2803 548.91 2/63 12.0273 574.52
75 12.0184 1184.90 21/ 2/75 12.0274 1036.35
90 12.0185 1500.75 3/90 12.0275 1779.05
110 12.0917 1811.49 4/110 12.0921 1871.25
5/140 12.0922 4864.24
MM Union Sockets
PTFE Diaphragm Size Code Price Spare PTFE Size Code Price
20 12.5074 250.97 Diaphragm 20 05.0473 51.00
25 12.5075 259.52 25 05.0473 51.00
32 12.5076 297.08 32 05.0474 57.23
40 12.5077 462.68 40 05.0475 71.02
50 12.5078 512.22 50 05.0475 71.02
63 12.5079 694.88 63 05.0476 80.35
75 12.0918 391.34
90 12.0918 391.34
110 12.0919 451.43
Also available with EPDM or FPM diaphragms. 140 12.0919 451.43
Please enquire for details.
Sizes
21/ 2"/75mm - 8"/225mm
Pressure Rating
Features
PN10
• Only Body Seal and Disc in contact with media
• Double sealed shaft Connections
• Valve support lugs in base
• Direct actuator mounting Between flanges, universaly drilled
• Low torque operation
• Multi-position Lockable Handle
• Manual or Gear operation
• All sizes PN10 rated
• Universal drilling - can be used withDIN, ANSI, BS and JIS flanges
Valve Dimensions
Lever Operated
Gear Operated
85º Max
Opening
Materials
Body - PVDF
Disc - PVDF
Seals - FPM
Sizes
21/ 2"/75mm - 10"/250mm
Valve Dimensions
DN A B C K W
65 115 63 20 139-145 90º
80 128 71 20 150-160 45º
100 155 80 20 175-191 45º
150 212 106 24 234-242 45º
200 264 140 24 290-299 45º
250 325 140 27 350-362 30º
manual valves
Kv Value Table
Pressure Lost 1 bar 0.001 bar
DN 80 2958 l/min 94 l/min
DN 100 5633 l/min 178 l/min
DN 150 12466 l/min 394 l/min
DN 200 21166 l/min 699 l/min
FPM Seals Size Code Price FPM Seals Size Code Price
16 12.1658 140.52 16 12.1676 140.52
20 12.1659 142.23 20 12.1677 142.23
25 12.1660 179.27 25 12.1678 179.27
32 12.1661 210.86 32 12.1679 210.86
40 12.1662 308.20 40 12.1680 308.20
50 12.1663 396.10 50 12.1681 396.10
63 12.1664 532.70 63 12.1682 532.70
75 12.1665 771.70 75 12.1683 771.70
90 12.1666 1015.85 90 12.1684 1015.85
110 12.2350 1418.81 110 12.2351 1418.81
Need advice?
Our expert team are here to help.
Call our freephone:
0800 975 79 71
Or from outside of the UK:
+44 191 521 3111
manual valves
FPM Seals Size Code Price FPM Seals Size Code Price
11/ 4"/40 07.0194 201.47 11/ 4"/40 07.0195 280.88
11/ 2"/50 07.0204 206.59 11/ 2"/50 07.0202 285.11
2"/63 07.0044 222.82 2"/63 07.0045 304.77
21/ 2"/75 07 0054 257.82 21/ 2"/75 07.0055 344.01
3"/90 07 0064 309.88 3"/90 07.0065 404.64
4"/110 07 0074 426.84 4"/110 07.0075 526.72
5"/140 07 0084 575.36 5"/140 07.0085 714.55
6"/160 07 0094 810.99 6"/160 07.0095 884.42
8"/225 07 0104 1932.71 8"/225 07.0105 1980.51
10"/280 07 0114 2168.33 10"/280 07.0115 2240.04
21/ 2"/75
o
ati
3"/90
plic
4"/110
ap
on
5"/140
6"/160
8"/225
10"/280
DIMENSIONS (mm)
D DN A B C
63 50 109 18 32
75 65 129 20 40
90 80 144 20 52
110 100 164 23 70
140 125 195 23 92
160 150 220 26 112
225 200 275 35 150
280 250 330 40 190
actuated valves
Actuated Valves
Valve Actuation
Almost all the valves we supply can be automated.
From simple air actuation, to complex configurations, we can build a unit to your exact
specifications.
Our in house experts can advise you on the options available and suggest the most suitable unit
for your application. The valves are normally assembled by our dedicated valve actuation team,
who can provide comprehensive after sales service.
Standard valves are shown on the following pages, but please contact Tony Welsh for any special
actuated valves
Fail-safe close Size Code Price Fail-safe close Size Code Price
FPM Seals 16 12.1449 P1A 389.19 FPM Seals 16 12.2259 P1A 389.19
PTFE Seats 20 12.1450 P1A 391.02 PTFE Seats 20 12.1491 P1A 391.02
25 12.1448 P1A 419.91 25 12.1492 P1A 419.91
32 12.1451 P1A 455.42 32 12.1493 P1A 455.42
40 12.1452 P1A 542.48 40 12.1494 P1A 542.48
50 12.1453 P1A 629.61 50 12.1495 P1A 629.61
63 12.1454 P1A 816.26 63 12.1496 P1A 816.26
75 12.1455 P1A 1169.61 75 12.1497 P1A 1169.61
90 12.1456 P1A 1481.52 90 12.1498 P1A 1481.52
110 12.2033 P1A 2025.66 110 12.2012 P1A 2025.66
Fail-safe close Size Code Price Fail-safe close Size Code Price
FPM Seals 3/ 8 12.2093 P1A 389.19 FPM Seals 1/ 2 12.2025 P1A 478.31
PTFE Seats 1/ 2 12.1482 P1A 391.02 PTFE Seats 3/ 4 12.2026 P1A 558.26
3/ 4 12.1483 P1A 419.91 1 12.2027 P1A 619.65
1 12.1484 P1A 455.42 11/ 4 12.2502 P1A 744.08
11/ 4 12.1485 P1A 542.48 11/ 2 12.2503 P1A 902.50
11/ 2 12.1486 P1A 629.61 2 12.2504 P1A 1167.98
2 12.1487 P1A 816.26 21/ 2 12.2505 P1A 1751.93
3 12.2506 P1A 2352.50
MM Fusion Sockets MM Fusion Spigots
Double Acting Size Code Price Double Acting Size Code Price
FPM Seals 16 12.1449 P3A 364.33 FPM Seals 16 12.2259 P3A 364.33
PTFE Seats 20 12.1450 P3A 366.17 PTFE Seats 20 12.1491 P3A 366.17
25 12.1448 P3A 395.03 25 12.1492 P3A 395.03
32 12.1451 P3A 430.53 32 12.1493 P3A 430.53
40 12.1452 P3A 482.79 40 12.1494 P3A 482.79
50 12.1453 P3A 569.91 50 12.1495 P3A 569.91
63 12.1454 P3A 710.07 63 12.1496 P3A 710.07
75 12.1455 P3A 1060.13 75 12.1497 P3A 1060.13
90 12.1456 P3A 1352.11 90 12.1498 P3A 1352.11
110 12.2032 P3A 1821.61 110 12.2012 P3A 1821.61
BSP Female Threaded Flanged BS4504 PN10/16
Double Acting Size Code Price Double Acting Size Code Price
FPM Seals 3/ 8 12.2093 P3A 364.33 FPM Seals 1/ 2 12.2025 P3A 453.41
PTFE Seats 1/ 2 12.1482 P3A 366.17 PTFE Seats 3/ 4 12.2026 P3A 533.38
3/ 4 12.1483 P3A 395.03 1 12.2027 P3A 594.77
1 12.1484 P3A 430.53 11/ 4 12.2502 P3A 684.37
11/ 4 12.1485 P3A 482.79 11/ 2 12.2503 P3A 842.78
11/ 2 12.1486 P3A 569.91 2 12.2504 P3A 1061.76
2 12.1487 P3A 710.07 21/ 2 12.2505 P3A 1642.44
3 12.2506 P3A 2223.09
Requires pilot valve - enquire for details.
actuated valves
MM Fusion Spigots
Fail-safe close Size Code Price
PTFE Diaphragm 20 12.5742 369.15
25 12.5743 374.93
32 12.5744 491.05
40 12.5745 640.37
50 12.5746 745.74
63 12.5747 875.96
Flanged PN10/16
Fail-safe close Size Code Price
PTFE Diaphragm 20 12.5756 492.73
25 12.5757 499.36
32 12.5758 559.08
40 12.5759 695.13
50 12.5760 861.05
63 12.5761 1045.19
Custom Actuation
We can provide standard
actuation or design solutions for
your control systems. Call Tony
Welsh on:
0800 975 79 71
pressure reducing valves
Under operating conditions the pressure reducing valve is always open which
means that it is balanced between the inlet pressure (primary side) and the
lower outlet/working pressure. At any rise of working pressure at the valve
outlet a pressure compensation via the control bore takes place at the area
below the diaphragm. The higher working pressure activates the large
diaphragm and lifts the piston against the spring force. The flow reduces and
the working pressure drops until the balanced condition is reached again.
When the working pressure drops this procedure is reversed. The spring force
opens the valve seat against the lower pressure force below the diaphragm. The flow rises until the balanced condition is
reached again.
Pre-setting or re-adjustment of the valve set pressure is made by removing the protective cap and by setting the control
screw. The counter nut is tightened after final adjustment. When used with neutral fluids, many of the pressure relief
valves can be fitted with a pressure gauge if required.
MM Fusion Spigots
Type 755
Setting Range
1 to 9 bar MM Fusion Spigots MM Union Fusion Sockets
FPM Seals Size Code Price FPM Seals Size Code Price
16 1220 83 534.51 16 1193 35 554.97
20 1220 84 534.51 20 1193 36 557.43
25 1220 85 809.01 25 1193 37 837.00
32 1220 86 809.01 32 1193 38 848.58
40 1220 87 1355.76 40 1193 39 1409.35
50 1220 88 1355.76 50 1193 40 1437.52
63 1220 89 1355.76 63 1193 41 1488.98
Type 765
Setting Range
0.5 to 9 bar MM Fusion Spigots MM Union Fusion Sockets
FPM Seals Size Code Price FPM Seals Size Code Price
16 1221 25 603.72 16 1193 77 622.97
20 1221 26 603.72 20 1193 78 626.27
25 1221 27 881.75 25 1193 79 907.48
32 1221 28 881.75 32 1193 80 919.95
40 1221 29 1760.92 40 1193 81 1808.34
50 1221 30 1760.92 50 1193 82 1835.70
63 1221 31 1760.92 63 1193 83 1887.17
0800 975 79 71
Or from outside of the UK:
+44 191 521 3111
pressure relief valves
Not normally installed as an in-line valve, it only opens when the system
pressure exceeds the pressure set against the diaphragm of the valve.
When this happens, the excess pressure forces the valve piston off its
seat, compressing the spring and allowing fluid to flow through the valve
body to discharge. Damping at the valve piston suppresses vibration
and fluttering.
When the system pressure falls back to below the set pressure, the
spring forces the piston back into the seat, closing the valve.
X = valve opens
Y = valve closed
pmax = max. pressure
pA = working pressure
pP = pump pressure
pÖ = opening pressure
pressure relief valves
FPM Seals Size Code Price FPM Seals Size Code Price
16 1467 00 443.81 16 1466 70 467.85
20 1467 01 443.81 20 1466 71 471.18
25 1467 02 686.86 25 1466 72 719.19
32 1467 03 686.86 32 1466 73 1066.77
40 1467 04 1062.61 40 1466 74 1120.67
50 1467 05 1062.61 50 1466 75 1147.23
63 1467 06 1062.61 63 1466 76 1189.53