Professional Documents
Culture Documents
Help PDF
Help PDF
1. SMS Indicator
6. WPS Button
☆ If you forget the user name, password or SSID for your Airtel 4G My WiFi,
try restoring the device to its factory settings
We strongly recommend that you change the default SSID and WiFi key to
keep your data secured.
☆ You can manage your Airtel My WiFi through the Web Interface at
http://192.168.1.1.
Make sure that the connection between the Airtel My WiFiand computer is
correctly done using USB cable .
Open the browser on your device and enter http://192.168.1.1 in the address
box.
Enter your username and password to log into the web management page.
The use of an incompatible charger may cause the device to malfunction, fail,
or could even cause a fire. Such use voids all warranties, whether expressed
or implied, on this product.
The Airtel 4G My WiFi will automatically connect to the internet after power
on. You can log in to the web management page follow below steps
The Wi-Fi device has a mode that allows the deviceturn off automatically if
there areno devices connected to the 4G My WiFi (via Wi-Fi or USB) for a
period of time .
- This mode allows the device to go to “ Wi-Fi Sleep ” Mode to save
battery life.
If you forget the username, password, or SSID you have set, you can restore
the settings on the web management page to the default factory settings. To
do so, simply press and hold the RESET button until the 4G My WiFi restarts.
Changing SSID and Password
* In HTTP Share Mode, the device only supports FAT/FAT32 file system.
* HTTP Share Mode: Share SD card via web browser. The removable drive
mapping of SD card via USB port will be disabled.
* USB Access Only: By the removable drive mapping, user can access SD card
*via USB cable only. The web page of sharing SD card will be disabled.
* Path to Share: You can input the sharing path, such as /Picture. By typing
only, a slash in Path to Share filed, you agree to share entire SD card.
* Path to Share can't be a dot, and can't contain following characters: <> " ' &
+ / \: * | # ? ~ `
SMS
Tips:
◇ Why isn’t Airtel 4G My WiFi responding?
Try restarting the device. If that doesn’t work, restore the device to its
factory settings.
(2) If Cannot find the WiFi key in the back of MiFi device, open the
management web UI, click "WiFi Settings" in home page, select "Display
Password" in "WiFi Settings" page, it will show WiFi password.
Check the WiFi available or not, the WiFi LED will display solid blue when
WiFi available.
Alternatively, you can disable this feature, although this might impact
battery life, Log in to the web interface and disable the WiFi auto off
feature.
◇ Why won’t my Airtel 4G My WiFi connect to a network even though all
the settings are correct?
When clients cannot access the internet properly, please check by below
steps:
(1) Check the network signal is available or not with MiFi, the network
LED will display solid green when network available. It also can be
checked in the web UI management page.
(3) The PIN verification feature might be enabled.You can disable this
feature if you find entering the PIN regularly inconvenient.
Your Airtel 4G My WiFi may overheat when you use it continuously over
a long period of time, and thereby trigger its automated protection
system. WiFi will be turn off and your Airtel 4G My WiFi will power off if
this occurs.
Please ensure the device is properly ventilated and cooled before you
power it on again.
◇ What Can I Do If the LED That Indicate No Signals and No Service Are
Displayed?
When the network LED display red in the MiFi, it means no signal or no
service. It most possible due to network coverage is poor in current
place, please move to other place to find available network.
When the network access speed is low, it most possible due to poor
network signal or too many users connected with same MiFidevice(Airtel
4G My WiFi) . Bring the MiFi device to a good network coverage area,
reduce the connected users can improve the access speed.