HYDRA-FLOAT:
the new STANDARD SYSTEM IDEAL FOR HIGH SCHOOLS-COLLEGES
THE CABLE CYLINDER...
is the core of the HYDRA FLOAT
STAGE RIGGING SYSTEM
The cable cylinder was recently developed as
part of the United States’ aerospace research
program. Hydra Float Stage Systems Corpo-
ration, under U.S. patent number 3558102,
has incorporated the cylinder exclusively for
stage rigging, including batten, hoisting,
stage elevators and wagons and similar
applications.
The cylinder comprises basically a conven-
tional hydraulic linear actuator, with the ex-
ception of the actuating rod or ram which is
replaced by a steel wire cable of equivalent A
Clevis attachment to which
tensile strength, are attached batten lines.
The outside of the cable is coated with a high
grade nylon and is precision extruded, pro-
ducing a coating of sufficient geometric accu-
racy and surface finish to enable @ perfect
‘hydraulic dynamic seal to be made.
The Hydra Float Stage System is uniquely Special stool wirecable,
suited for installation in new and existing Exceeds code specifications.
theatres, incorporating servo speed
valves and analogue closed loop positioning
within a single operator control console.
Viton seal gland
aperture, Seals fluid.
Cylinder control ports
for hydraulic uid.
Precision machined
steel sheave.
Cylinder manufactured
in any length.
Pump in position on site at Uris Theatre, New York.
Single power source drives entire Hydra Float Sys-
tem in any installation.