You are on page 1of 1

R6#en

R6#conf t
Enter configuration commands, one per line. End with CNTL/Z.
R6(config)#ipv6 unicast-routing

R6(config)#int s0/0/1
R6(config-if)#ipv6 address 2001:DB8:1:5::2/64
R6(config-if)#ipv6 address fe80::1 link-local
R6(config-if)#ipv6 enable
R6(config-rtr)#no sh

R1(config)#int f0/0
R1(config-if)#ipv6 address 2001:DB8:6::1/64
R1(config-if)#ipv6 address fe80::1 link-local
R1(config-if)#ipv6 enable
R1(config-rtr)#no sh

You might also like