Professional Documents
Culture Documents
Service Manual Revised
Service Manual Revised
TKR-850
SERVICE MANUAL
REVISED © 2001-5 PRINTED IN JAPAN
B51-8557-10 (N) 1233
CONTENTS
GENERAL .................................................. 2 TERMINAL FUNCTION ........................... 49
SYSTEM SET-UP ...................................... 2 WIRING.................................................... 53
OPERATING FEATURES .......................... 3 PC BOARD VIEWS
REALIGNMENT ....................................... 11 RX PLL/VCO (X58-4800-XX) .............. 55
INSTALLATION ....................................... 13 TX PLL/VCO (X58-4810-XX) ............... 56
MODIFICATION ....................................... 15 DISPLAY UNIT (X54-3330-20) ............ 57
DISASSEMBLY FOR REPAIR ................. 17 FINAL UNIT (X45-3630-XX) ................ 61
CIRCUIT DESCRIPTION .......................... 18 TX-RX UNIT (X57-6270-XX) (A/2) ...... 67
SEMICONDUCTOR DATA ...................... 24 TX-RX UNIT (X57-6270-XX) (B/2) ...... 73
DESCRIPTION OF COMPONENTS ........ 26 SCHEMATIC DIAGRAM.......................... 79
PARTS LIST ............................................. 28 BLOCK DIAGRAM ................................... 91
EXPLODED VIEW .................................... 39 KES-4 (EXTERNAL SPEAKER) ............... 94
PACKING ................................................. 41 SPECIFICATIONS .................................... 95
ADJUSTMENT ........................................ 42
TKR-850
GENERAL / SYSTEM SET-UP
SYSTEM SET-UP
NO
YES
External speaker? KES-4 installation
NO
Delivery
2
TKR-850
OPERATING FEATURES
9 8 7 6
1 2 8 3 4 9
7 6 5
2. Two 7-segment LED Displays • “E2” is displayed when the channel data is not written.
4
TKR-850
OPERATING FEATURES
3. Programmable Functions
TKR-850 contains many Programmable Functions tabled below.
Programmable Function Description
AUX Out 1~5 Off AUX Out 1 to 5 ports become deactivated, respectively.
AUX I/O 1~6 Off AUX I/O 1 to 6 ports become deactivated, respectively.
AUX Out 1~5 On AUX Out 1 to 5 ports become activated, respectively.
AUX I/O 1~6 On AUX I/O 1 to 6 ports become activated, respectively.
AUX Out 1~5 On/Off AUX Out 1 to 5 ports are toggled between its active and inactive states, respectively.
AUX I/O 1~6 On/Off AUX I/O 1 to 6 ports are toggled between its active and inactive states, respectively.
Channel 1~16 Directly select Channel 1 to 16, respectively.
Channel Down The channel decrements by one.
Channel Up The channel increments by one.
CW ID On The CW ID is transmitted.
CW Message 1~8 On The CW Message 1 to 8 is transmitted, respectively.
Display Off All panel LEDs are turned off except the Power LED.
Display On All panel LEDs become active as normal status indicators on the repeater.
Display On/Off All panel LEDs, with the exception of the Power LED, are toggled between off and their normal status on
the repeater.
Hold Time Enable The Parameter of Repeat Hold Time is enabled.
Hold Time Disable The Parameter of Repeat Hold Time is disabled.
Hold Time Disable/Enable The Parameter of Repeat Hold Time is toggled between disabled and enabled.
Local Tx Disable The local mic’s PTT is disabled.
Local Tx Enable The local mic’s PTT is enabled.
Local Tx Disable/Enable The local mic’s PTT is toggled between disabled and enabled.
Monitor Off The QT/DQT decoder is disabled.
Monitor On The QT/DQT decoder is enabled.
Monitor On/Off The QT/DQT decoder is toggled between disabled and enabled.
Monitor Momentary The QT/DQT decoder is momentarily disabled.
Multi Table Sub Multi Table No. Select Signalling changes to the Multi Table Sub.
Multi Table Main Multi Table No. Select Signalling changes to the Multi Table Main.
Multi Table Main/Sub Multi Table No. Select Signalling changes between Multi Table Sub and Multi Table Main.
QT/DQT Dec Disable Disables the QT/DQT decode operation.
QT/DQT Dec Enable Enables the QT/DQT decode operation.
QT/DQT Dec Disable/Enable Toggles between disabling and enabling the QT/DQT decode operation.
QT/DQT Enc Disable Disables the QT/DQT encode operation.
QT/DQT Enc Enable Enables the QT/DQT encode operation.
QT/DQT Enc Disable/Enable Toggles between disabling and enabling the QT/DQT encode operation.
Repeat Disable Disables repeater operation.
Repeat Enable Enables repeater operation.
Repeat Disable/Enable Toggles between disabling and enabling repeater operation.
Reset Resets to default condition set up by FPU.
DC Power Save Off Activates DC Power Save Mode Off.
DC Power Save On Activates DC Power Save Mode On.
DC Power Save On/Off Toggles between DC Power Save Mode On and Off.
5
TKR-850
OPERATING FEATURES
Programmable Function Description
Scan Off Inhibits scanning.
Scan On Starts scanning.
Scan On/Off Scanning is toggled between being enabled or inhibited.
Scrambler Off Disables an installed optional voice scrambler board.
Scrambler On Enables an installed optional voice scrambler board.
Scrambler On/Off Toggles between enabling and disabling an installed optional voice scrambler board.
Squelch Off The Squelch unmutes.
Squelch On The Squelch mutes.
Squelch On/Off The receiver’s squelch toggles between muted and unmuted.
Squelch Momentary The Squelch momentarily unmutes.
Take Over On/Off Toggles between disabling and enabling remote wireline control.
Test Tone Off The Test Tone is inhibited.
Test Tone On The Test Tone is enabled.
Test Tone On/Off Toggles between enabling and inhibiting the Test Tone.
TOT Disable The Time Out Timer is disabled.
TOT Enable The Time Out Timer is enabled.
TOT Disable/Enable The Time Out Timer is toggled between disabled and enabled.
TX Disable The transmitter is inhibited.
TX Enable The transmitter is enabled (normal).
TX Disable/Enable Toggles between transmitter inhibited and transmitter enabled (normal).
The following Programmable Functions are output functions used to tell the condition of the TKR-850 to an external device.
The output functions can be assigned to only AUX Outputs as follows.
Programmable Function Description
COR (Carrier Operate Relay) This function becomes valid if an RF carrier is present.
TOR (Tone Operate Relay) This function becomes valid if an RF carrier and the specified QT/DQT are present.
RX Unlock This alarm function becomes valid if the RX PLL circuitry becomes unlocked.
TX Unlock This alarm function becomes valid if the TX PLL circuitry become unlocked.
Power Supply Lower Limit This alarm function becomes valid if the DC power supply voltage becomes less than the preset point.
The preset point is selected in the range of 10.6V to 13.6V.
TXS (TX Sense) This function becomes valid when the transmitter is keyed.
Selectable AUX Outputs which are set up as Selectable appear in the available Function List for the AUX Input
Functions and Key Assignment.
This allows AUX Inputs and PF Keys to be used to control AUX Outputs.
RX Signal Detect This function becomes valid if the RX signal level becomes less than the preset point. The preset point is
selected in the range of –120dBm to –95dBm.
RF Power Down Detect This alarm function becomes valid if the RF Power becomes less than about 10W.
Fan Status This alarm function becomes valid when the Fan is turned on, either by sensing a high temperature
condition or by its operating mode being set to Continuous.
6
TKR-850
OPERATING FEATURES
4. Trigger Assignment
The Programmable Functions described above can be assigned to PF keys, AUX input, Save on/off, Start up, and Power supply
according to following table.
In the last column of the table, when the Programmable Functions is assigned to any PF keys, it expresses that the LED in the
PF key turns on either conditions. “Yes” expresses that the trigger is available the Programmable Function. “No” expresses
that the trigger is not availabale the Programmable Function.
Trigger PF keys AUX Save Start up Power Condition of LED in he PF key on
Function input on/off supply
AUX Out 1~5 (I/O 1~6) Off No Yes Yes Yes Yes –
AUX Out 1~5 (I/O 1~6) On No Yes Yes Yes Yes –
AUX Out 1~5 (I/O 1~6) On/Off Yes Yes No No No Turns on in ON status.
Channel 1~16, Up/Down Yes Yes Yes Yes Yes Do not turn on.
CW ID On Yes Yes Yes Yes Yes Turns on while transmitting.
CW Message 1~8 On Yes Yes Yes Yes Yes Turns on while transmitting.
Display Off No Yes Yes Yes Yes –
Display On No Yes Yes Yes Yes –
Display On/Off Yes Yes No No No Turns on in ON status.
Hold Time Enable No Yes Yes Yes Yes –
Hold Time Disable No Yes Yes Yes Yes –
Hold Time Disable/Enable Yes Yes No No No Turns on in Disable status.
Local Tx Disable No Yes Yes Yes Yes –
Local Tx Enable No Yes Yes Yes Yes –
Local Tx Disable/Enable Yes Yes No No No Turns on in Disable status.
Monitor Off No Yes Yes Yes Yes –
Monitor On No Yes Yes Yes Yes –
Monitor On/Off Yes Yes No No No Turns on in ON status.
Monitor Momentary Yes No No No No Turns on in ON status.
Multi Table Sub No Yes Yes Yes Yes –
Multi Table Main No Yes Yes Yes Yes –
Multi Table Main/Sub Yes Yes No No No Turns on in Sub status.
QT/DQT Dec Disable No Yes Yes Yes Yes –
QT/DQT Dec Enable No Yes Yes Yes Yes –
QT/DQT Dec Disable/Enable Yes Yes No No No Turns on in Disable status.
QT/DQT Enc Disable No Yes Yes Yes Yes –
QT/DQT Enc Enable No Yes Yes Yes Yes –
QT/DQT Enc Disable/Enable Yes Yes No No No Turns on in Disable status.
Repeat Disable No Yes Yes Yes Yes –
Repeat Enable No Yes Yes Yes Yes –
Repeat Disable/Enable Yes Yes No No No Turns on in Disable status.
Reset Yes Yes No No No Do not turn on.
DC Power Save Off No Yes No Yes Yes –
DC Power Save On No Yes No Yes Yes –
DC Power Save On/Off Yes Yes No No No Do not turn on.
Scan Off No Yes Yes Yes Yes –
7
TKR-850
OPERATING FEATURES
Trigger PF keys AUX Save Start up Power Condition of LED in he PF key on
Function input on/off supply
Scan On No Yes Yes Yes Yes –
Scan On/Off Yes Yes No No No Turns on in ON status.
Scrambler Off No Yes Yes Yes Yes –
Scrambler On No Yes Yes Yes Yes –
Scrambler On/Off Yes Yes No No No Turns on in ON status.
Squelch Off No Yes Yes Yes Yes –
Squelch On No Yes Yes Yes Yes –
Squelch On/Off Yes Yes No No No Turns on in OFF status.
Squelch Momentary Yes No No No No Turns on in OFF status.
Take Over On/Off Yes No No No No Turns on in ON status.
Test Tone Off No Yes Yes Yes Yes –
Test Tone On No Yes Yes Yes Yes –
Test Tone On/Off Yes Yes No No No Turns on in ON status.
TOT Disable No Yes Yes Yes Yes –
TOT Enable No Yes Yes Yes Yes –
TOT Disable/Enable Yes Yes No No No Turns on in Disable status.
TX Disable No Yes Yes Yes Yes –
TX Enable No Yes Yes Yes Yes –
TX Disable/Enable Yes Yes No No No Turns on in Disable status.
None Yes Yes Yes Yes Yes Do not turn on.
8
TKR-850
OPERATING FEATURES
Current : When any PTT as described above is active 1) if a RF carrier and a valid QT/DQT is present. The receiv-
while the repeater is in use or the duplex-base station is re- ing channel number is displayed and the received audio is
ceiving, the “paired” encode QT/DQT associated with re- heard from a speaker.
ceiving QT/DQT is transmitted. When any PTT is active 2) if a RF carrier is present, providing that the Monitor On
while the repeater or the duplex-base station is in idle pe- function is executed.
riod, the “Primary” encode QT/DQT is transmitted. 3) if the Squelch Off function is executed. Scanning stops
on the channel being scanned when Squelch Off is ex-
Primary : When any PTT (provided that the Priority of any ecuted, the channel number is displayed and the re-
PTT is higher than the Priority of Repeat PTT) is active while ceived audio is heard from a speaker.
the repeater is in use, the encode QT/DQT changes 4) if a local microphone’s hook is in off hook status, provid-
“paired” encode QT/DQT to “Primary” while continuing to ing that the Off Hook Scan function is set to Disable.
transmit. When any PTT is active while the repeater is in Scanning stops on the Revert channel, but the audio is
idle period, the “Primary” encode QT/DQT is transmitted. not heard until a valid signal is received.
In the base station, the “Primary” encode QT/DQT is always
transmitted regardless of the receiver status. When the received call is ended, scanning automatically
resumes after the period set in Dropout Delay Time function
7-3. QT Reverse Burst Time has expired. When the Scan Off function is executed, the
During repeat with QT tones, the repeater re-transmits a TKR-850 inhibits scanning and displays the selected chan-
phase-shifted burst of the QT tone (“reverse burst”) when it nel.
detects the radio using the repeater has un-keyed and also
sent a reverse QT burst (squelch-tail elimination). This 8-2. Scan Sequence
mutes a receiving radio’s speaker audio before its receiver 1) Normal Scan : When no Priority channel is set, scanning
circuit shuts off causing squelch tail noise in the speaker of ADD channels is done in ascending order.
audio. The TKR-850 can select the time between 140 to 200 2) Single Priority Scan : The Priority channel is set as either
ms that the QT reverse burst is sent. Typically this time a fixed channel or a selected channel. When Priority
should not have to be adjusted from the default value. The channel is set, Priority channel and non Priority channel
transmission of the QT reverse burst can be also inhibited if are scanned by turns. When scanning stops on the non
the QT Reverse Burst function is set to “No”. Priority channel, calls from the Priority channel are still
checked at set intervals while scanning is stopped. This
7-4. DQT Turn Off Code Time operation is called Look Back and the interval period is
During repeat with DQT tones, the repeater re-transmits selected by the Look Back Time function.
a specific turn-off code when it detects the radio using the
repeater has un-keyed and also sent the turn-off code 8-3. Revert Channel
(squelch-tail elimination). This mutes a receiving radio’s The Revert channel is a channel that is used to transmit
speaker audio before its receiver circuit shuts off causing during scanning. The time from the end of transmission on
squelch tail noise in the speaker audio. Revert channel to the time scanning automatically resumes
The TKR-850 can select the time between 140 to 200ms is set in Dwell Time function. The Revert channel types are
that the DQT turn-off code is sent. Typically this time should Last Called, Last Used, Selected, Selected + TalkBack, Pri-
not have to be adjusted from the default value. ority, and Priority + TalkBack.
7-5. Off Hook Decode 1) Last Called : The TKR-850 reverts to the channel upon
The TKR-850 is able to decode QT/DQT regardless which a call was last received even if scanning has re-
whether the local microphone is in the on- or off-hook condi- sumed (power on default = selected channel).
tion. When the Off Hook Decode function is enabled, the 2) Last Used (with TalkBack) : The TKR-850 reverts to the
TKR-850 is capable of QT/DQT decode even though the mi- channel that was last transmitted on (power on default =
crophone is in the off-hook condition (or a local microphone selected channel). However, if a call is received on a
is not installed). channel other than the last transmit channel and PTT is
pressed before scanning resumes, the transceiver “talks
back” on the current receive channel.
8. Scan Feature 3) Selected : The transceiver reverts to the channel set by
8-1. Scan Operation the function prior to scan initiation.
Providing that the TKR-850 contains two or more non-pri- 4) Selected+TalkBack : The TKR-850 reverts to the channel
ority ADD channel or one or more non-priority ADD channel set by the Channel ‘X’ functions or Channel Select func-
and Priority channel, it starts scanning once the Scan On tion prior to scan initiation. However, if a call is received
function is executed and displays “SC” on the 7-seg LED. on a channel other than the selected channel and PTT is
Scanning stops temporarily if any following conditions be pressed before scanning resumes, the transceiver “talks
come valid. back” on the current receive channel.
5) Priority : The TKR-850 always reverts to the Priority chan-
nel.
9
TKR-850
OPERATING FEATURES
6) Priority+TalkBack : The TKR-850 always reverts to the 13. Take Over
Priority channel. However, if a call is received on a chan-
nel other than the Priority channel and PTT is pressed The Take Over function is used to disable the external
before scanning resumes, the transceiver “talks back” wireline control of the repeater. When Take over function is
on the current receive channel. enabled, the external AUX inputs and Outputs, transmit au-
dio inputs and receive audio outputs, External PTT and Ex-
ternal Monitor lines are disabled. All AUX Input functions
9. CW ID and Message assigned to any AUX Input stay in their current state. How-
The TKR-850 contains internal automatic station identifi- ever External PTT and External Monitor switch to the “Off”
ers. The CW ID (Morse code) is set and transmitted on a state.
per-channel basis. The CW ID is transmitted when the in-
terval period is reached (TX Interval Time function), the
14. Test Tone
channel is changed (CW ID on Channel Change function) or
CW ID Onfunction is executed. When CW ID is activated by The Test Tone is a single-frequency audio sine wave and
any functions described above, it is actually sent after the is turned On and Off by toggling Test Tone On/Off functions.
total time of TX Delay Time (not applied to CW ID On func- The transmitter can be modulated without a local micro-
tion) and CW Modulation Delay Time has expired. TX Delay phone by using the test tone. When Test Tone On function
Time is a period from CW ID is activated to the transmitter is is executed and any PTT is activated, the TKR-850 transmits
keyed. the test tone with mic mute and also routes the test tone to
CW Modulation Delay is a period from the transmitter is RA port.
keyed to the CW ID tone is sent. The CW ID tone is routed
to the Receive Audio (RA) port and a speaker if the Send CW 15. RF Power
ID to RA function is set to Yes. The TKR-850 contains 8 The TKR-850 is able to switch transmission output on a
message banks for CW Message. CW Message 1 to 8 is per-channel basis. When the TX High Power function is en-
transmitted on the current channel when the CW Message abled, the transmission output is set to high power.
1 to 8 On function is activated, respectively.
10
TKR-850
OPERATING FEATURES / REALIGNMENT
11
TKR-850
REALIGNMENT
3-3. KPG-46 Description (PC Programming Inter- 4. Firmware Programming Mode
face Cable : Option)
4-1. Preface
The KPG-46 is required to interface the TKR-850 to the
The TKR-850 uses flash memory to allow it to be easily
computer. It has a circuit in its D-sub connector (25-pin)
upgraded when new features are released in the future.
case that converts the RS-232C logic level to the TTL level.
The KPG-46 connects the microphone connector of the
TKR-850 to the computer’s RS-232C serial port. 4-2. Connection Procedure
Connect the TKR-850 to the personal computer (IBM PC
or compatible) with the interface cable (KPG-46). (Connec-
3-4. Programming Software Description
tion is the same as in the PC mode.)
The KPG-66D programming disk is supplied in 3-1/2" disk
format. The software on the disk allows a user to program
TKR-850 repeater via the programming interface cable (KPG- Notes :
46). You can only program firmware from the 8-pin micro-
phone connector on the front panel. Using the 25-pin logic
interface on the rear panel will not work.
3-5. Programming With IBM PC
Data can be programmed into the flash memory in RS-
232C format via the microphone connector. 4-3. Programming
1. Start up the programming software (Fpro. exe).
2. Set the communications speed (normally, 115200 bps)
IBM PC and communications port in the configuration item.
3. Set the firmware to be updated by file name item.
4. Turn the TKR-850 power on with the [PF1] key held
KPG-46 down. Hold the key down for one second until the 7-
segment display changes to “P.G.”. When “P.G.” ap-
pears, release your finger from the key.
5. Check the connection between the TKR-850 and the per-
sonal computer, and make sure that the TKR-850 is in the
program mode.
6. Press write button in the window. A window opens on
the display to indicate progress of writing.
KPG-66D
7. If writing ends successfully, the TX LED on the TKR-850
lights.
8. If you want to continue programming other TKR-850s,
TKR-850 repeat steps 3 to 6.
Fig. 1
Notes :
This mode cannot entered if the firmware program mode
is set to disable in the programming software (KPG-66D).
4-4. Function
If you press the [PF1] key (front panel), both decimal
point on the 7-segment display will disappear. The writing
speed is 38400 bps (low-speed mode). If you press the
[PF1] key again, the right hand decimal points will light. The
writing speed is 57600 bps (middle-speed mode).
Note :
Normally, write in the high-speed mode (115200 bps).
12
TKR-850
INSTALLATION
R742
ply need not be connected (if an external switch is used or if CN604
1
only a solar battery is used), connect it to the Backup con- CN606
nector, not the Main DC connector. Current consumption
CN601
can be reduced by approx. 120mA because the relay is not
used.
If it is installed when the temperature at the repeater site CN605
14
is below freezing, check whether the switch (relay) works
properly after installation.
2. Voice Scrambler
It operates only during base operation. The voice is not
Fig. 1
scrambled when it is repeated.
Display unit
Foil side
PTO
Fig. 3
13
TKR-850
INSTALLATION
• Extracting tool
The following extracting tool is recommended :
Molex Inc. Order No. : 11-03-0002
Note :
Relationship between TEST/SPKR connector (15-pin)
connection and speaker output.
When pins 9 and 12 are shorted : Built-in internal speaker
is used.
When pins 9 and 12 are open and output is from pins 6
and 12 : KES-4 is used.
Fig. 4-3
14
TKR-850
MODIFICATION
K1
IC602
R756 R770
Fig. 3
$Q607
IC623 $Q611 CN605
$R759 $R769
R755 R769
C681
$Q608 $Q612
Fig. 1
5V 5V
Add $R761
($R759)
3.9kΩ
Remove
D625 (D624)
DA204U
Add $Q608 Add $Q612
($Q607) ($Q611)
Shift DTD114EKA DTD114EKA
register TEST/
IC623 Remove Remove SPKR
R755 (R756) R769 (R770)
0Ω 0Ω
Fig. 2
15
TKR-850
MODIFICATION
You can also flip the top plate upside-down to adjust a
3. Trickle Charge for Backup Battery
height of the cabinet space.
If the external DC power supply is connected to the Main
DC connector and a backup battery (12V rechargeable type) Hardware fixture
Tighten screws
is connected to the Backup connector at the same time, the
battery can be trickle-charged from the external DC power
Cushion Insert the plate
supply with a maximum current of 0.5A. (G13-1801-04 or
Short the CHARGE land near R61. tabs to set the
G13-1802-04) height position
(high, middle,
Notes : or low).
or
1. Make this modification after removing the DC power sup-
ply and battery for safety.
2. When the DC power supply is connected after the modi-
fication, DC voltage is output to the Backup connector.
Be careful during setup.
3. When the backup battery is used for a long time, remove
the battery from the repeater and recharge it because the
trickle charge is not sufficient for recharging a completely
discharged battery.
Fig. 5
CN7 BACKUP
(ORANGE)
K1
5. Key Cover
To avoid accidentally pressing the keys, you can install
CHARGE the key cover.
screws (N35-3006-46).
Fig. 4
4. Accessory Cabinet
You can install optional accessories, such as a DC power
supply or duplexers in the accessory cabinet.
Spacers
(J02-0475-05)
Fig. 7
Squeeze and
insert the plates.
Name plates for
the function keys
Name plates
Fig. 8
17
TKR-850
CIRCUIT DESCRIPTION
band of 5.0MHz, 400 to 430MHz with a pass band of
1. Outline
3.0MHz (K3).
The TKR-850 is a UHF/FM repeater designed to operate The BPF L4/L5 attenuates the unwanted signals, and
in the frequency range of 440 to 470MHz (E), 450 to sends only the necessary signal to the first mixer DBM A1.
480MHz (K), 480 to 512MHz (K2) or 400 to 430MHz (K3).
The unit consists of receiver, transmitter, phase-locked
2-2. First Mixer
loop (PLL) frequency synthesizer, and control circuits.
The signal from the BPF is heterodyned with the first lo-
cal oscillator signal from the PLL frequency synthesizer cir-
2. Receiver Circuit cuit at the first mixer DBM (A1) to become a 44.85MHz first
The receiver is double conversion super-heterodyne, de- intermediate frequency (IF) signal. The first IF signal is fed
signed to operate in the frequency range of 440 to 470MHz through two monolithic crystal filters (XF2; Wide, XF1; Nar-
(E), 450 to 480MHz (K), 480 to 512MHz (K2) or 400 to row) to further remove spurious signals.
430MHz (K3).
The receiver circuit located in TX-RX unit (X57-627 A/2) 2-3. IF Amplifier
consists of the following : 2-1 front-end circuit, 2-2 first The first IF signal is amplified by Q2 and Q3, and then
mixer, 2-3 IF amplifier circuit, 2-4 audio amplifier circuit, and enters IC9 (FM system IC). The signal is heterodyned again
2-5 squelch circuit. with a second local oscillator signal (44.395MHz) with in IC9
to become a 455kHz second IF signal. The second IF signal
2-1. Front-end Circuit is fed through a 455kHz ceramic filter, CF1 (Wide), CF2 (Nar-
The front-end circuit consists of BPF L2, RF amplifier Q1, row) to further eliminate unwanted signal, and the quadra-
and BPF L4/L5. The helical BPF covers frequency ranges ture detection circuit FM-detects the signal to produce a
440 to 480MHz (K,E) and 480 to 512MHz (K2) with a pass- base-band signal and output it from pin 11.
RX ANT
TX-RX unit (X57 A/2): TX-RX
MCF (Wide) 44.85MHz
XF2
IF AMP IF AMP 1st MIX BPF RF AMP BPF
Q3 D2 D1 Q2 DBM A1 L4,L5 Q1 L2
SW MCF (Narrow) SW
XF1
RX VCO
W/N W/N
44.850MHz IF AMP IF AMP IF AMP A3 (X58-480)
LPF Q10 Q9 Q8
FM SYSTEM IC VCO A
RSSI IC9
VCO B
Q4
SW QUD
fRX–44.85MHz
DET W/N CF1 (Wide) X1
NOISE DET SW SW 44.395MHz
D5 D4 D3
SQL
DET
CF2 (Narrow)
NOISE AMP
455kHz
Q7 W/N
RD RA INV Q605
IC604
ASQ IC621
AM
CPU SPM
RSSI
18
TKR-850
CIRCUIT DESCRIPTION
2-4. Audio Amplifier 3. Transmitter Circuit
The audio amplifier circuit is located in control section of
The transmitter circuit consists of the following circuits :
TX-RX unit (X57-627 B/2). The recovered audio signal ob-
3-1 microphone circuit, 3-2 modulation level adjustment cir-
tained from IC9 is amplified by IC608, input to the AINR ter-
cuit, 3-3 driver and final power amplifier circuit, and 3-4 auto-
minal of CODEC IC (IC614), and audio processed by DSP
matic power control circuit.
(IC618).
The processed audio signal from AOUTR terminal of
IC614 is amplified by IC619 (B/2) to a sufficient level, anti- 3-1. Microphone Circuit
aliasing filtered by IC619 (A/2). The audio signal goes to an The signal from the microphone is passed through AGC
electronic volume (IC615) V3/V4, to the input of multiplexer circuit located in display unit (X54-333), so that it does not
IC (IC622), and is amplified to drive a loudspeaker by an au- saturate. This circuit consists of IC501, D501, D502, Q501,
dio power amplifier (IC629). The 4W audio output can be and Q502. The AGC is operated by controlling the + and –
provided to external 4 ohms speaker through the 15-pin test side levels of amplitude using the current obtained by posi-
connector “SPO, SPG” on the rear panel. tive and negative detection of the amplified audio signal.
The audio signal goes to control section of TX-RX unit (X57-
627 B/2) from display unit (X54-333).
2-5. Squelch Circuit
The transmit audio signal goes to the input of the multi-
The output signal from IC9 enters FM IC again, then
plexer IC (IC605) for microphone muting. The audio signal is
passed through a band-pass filter.
amplified by IC610, input to the AINL terminal of CODEC IC
The noise component output from IC9 is amplified by Q7
(IC614), and audio processed by DSP (IC618). The pro-
and rectified by D5 to produce a DC Voltage corresponding
cessed audio signal from the AOUTL terminal of IC614 is
to the noise level. The DC voltage is sent to the analog port
amplified by IC616 (A/2) to a sufficient level, anti-aliasing fil-
of the CPU (IC604).
tered by IC616 (B/2), and amplified by the summing ampli-
IC9 outputs a DC voltage (RSSI) corresponding to the in-
fier IC611 (A/2).
put of the IF amplifier.
3-2. Modulation Level Adjustment Circuit
The output of the summing amplifier IC611 (A/2) is
passed to an electronic volume (IC615) for maximum devia-
tion adjustment before being applied to a varactor diode in
the voltage controlled oscillator (VCO) A2 located in TX-RX
unit (X57-627 A/2).
Display unit
(X54 B/2) Display unit (X54 A/2)
J601
DET
D501,502
TDS
TAS
19
TKR-850
CIRCUIT DESCRIPTION
3-3. Driver and Final Power Amplifier Circuit
The transmit signal is generated by the TX VCO (A2),
amplified by Q11, and sent to final unit (X45-363). This am-
plified signal is amplified by Q1, Q2, Q3, and Q4, and is
passed to the FINAL stage. The RF power amplifier consists
of MOS FET.
20
TKR-850
CIRCUIT DESCRIPTION
VCO unit (X58-480) TX-RX unit VCO unit (X58-481) TX-RX unit
Q350 Q355 Q350 : K,K2,E Q355
Q354
MO
SW SW Q352
MO MO
SW Q353 Q351 : K3
SRR VCO B
VCO B
MO
Q351
CP,DP CP,DP
EPR,LDR EPT,LDT
µ-com µ-com
IC604 IC604
21
TKR-850
CIRCUIT DESCRIPTION
PF1~6
KEY1~5
SI SO SI SO SI SO DAT
Shift Reg. 1 Shift Reg. 2 Shift Reg. 3 Shift Reg. 4
BU4094BCFV BU4094BCFV BU4094BCFV BU4094BCFV
SW SW
SW SW SW SW
22
TKR-850
CIRCUIT DESCRIPTION
5-6. DSP 6. DC Power Supply Circuit
The DSP circuit filters transmit/receive audio signal and
encode/decodes signaling (QT, DQT). This circuit consists 6-1. DC Source Switching Relay Circuit
of IC618, IC612, IC613, IC614, IC603, IC606, IC608, IC610, 1. The final unit contains a relay (K1) for switching between
IC616, and IC619. the Main DC and Backup Battery.
The receive signal DET is converted from analog to digital If an external power source is connected to the Main DC
by IC614 with a sampling frequency of 16.128kHz. The digi- terminal, the Backup terminal is isolated by the relay. If
tized audio signal is sent to DSP IC618 to process the signal- the Main DC turns OFF due to power failure, it is
ing signal and audio signal. The processed digital audio sig- switched to the Backup terminal by the relay.
nal is fed to CODEC IC613, converted from digital to analog, The CPU monitors which is used, Main DC or Backup
and the analog signal is output from pin 16 (AOUTR). Then, Battery.
the audio signal is amplified by IC619 (B/2), passes through 2. Trickle charge circuit
the IC619 (A/2) low-pass filter, and goes to an electronic vol- If both Main DC and Backup Battery are connected,
ume IC615. trickle charging of 0.5 A max. can be performed from the
The transmit audio signal coming from IC605 is amplified Main DC power supply to the Battery.
by IC610, fed to pin 3 (AINL) of CODEC IC614, and con- (The default is OFF. See the Modification section for in-
verted from analog to digital at a sampling frequency of formation on the modification method.)
16.128kHz. The digitized transmit audio signal is AGC-pro- The battery is charged from the Main DC with D8, D9 and
cessed, pre-emphasized and filtered at 300Hz to 3kHz by R61. If it exceeds 0.5 A, the charging circuit is turned
DSP IC618, and the resulting signal is fed back to CODEC OFF by D9.
IC614, and converted from digital to analog, and the analog Main
signal is output from pin 15 (AOUTL). The transmit signal DC R54
D8
from AOUTL is amplified by IC616 (B/2), passes through the
D9
IC616 (A/2) low-pass filter, and goes to the IC611 (A/2) sum- +B
R61
ming amplifier. K1
120mA
IC613 is a counter IC and the clock required for the Land (Relay)
Backup
CODEC and DSP is generated by dividing the 16.515MHz battery Final unit (A/2)
clock signal produced by DSP IC618.
IC603 and IC606 are interface IC between the CPU oper- TX-RX unit (A/2)
ated at 5.0V and the DSP operated at 3.3V.
TX-RX unit (B/2)
16
5-7. Base-Band Circuit BUP
The base-band circuit switches between the modulation IC604
CPU
signal to the transmitter circuit, and remote audio and ad-
justs their levels. This circuit consists of IC605, IC607,
Q601
IC611, IC615, and IC617.
Modulation inputs include local microphone input, low-
speed data (LSD), high-speed data (HSD), external audio in- Fig. 9 DC source switching relay circuit
put (TA), and external data input (TD), and demodulation out-
puts include receive audio output (RA), and receive data out-
6-2. SB Switching Relay Circuit
put (RD).
1. SB (Switched +B) is supplied through the relay (K1) in the
The multiplexer (IC605) changes signals, the electronic
TX-RX unit A/2.
volume (IC615) adjusts the level, and the operational ampli-
When S507 (DC source switch) in the display unit is
fier (IC607, IC611, IC617) amplifiers and sums signals.
turned ON, the relay (K1) is turned ON to output SB.
2. If +B exceeds 18V, the relay is forcibly turned OFF by
5-8. RS-232C Circuit
D12 and Q25 to interrupt the power and protect the main
The RS-232C circuit connects the RS-232C serial port of a
unit.
personal computer directly to this model to perform FPU K1
operation. The FPU operation can also be performed by con- +B SB
necting a programming cable (KPG-46) to the local micro-
phone on the front panel. But, if the D-sub connector on the R165 R166
rear panel is used, the programming cable is not required.
The 232C driver IC (IC620) changes the TTL-232C level. The D12 Q25 Land
firmware can only be rewritten with the local microphone on (PSW)
Q24
the front panel.
24
TKR-850
SEMICONDUCTOR DATA
25
TKR-850
SEMICONDUCTOR DATA / DESCRIPTION OF COMPONENTS
Pin No. Name I/O Function Final Unit (X45-3630-XX)
80 NC13 – Not used (No connection) Ref No. Part name Description
81 HD3 I/O HPI data bus IC1 IC Thermostat
82 TOUT0 – Not used (No connection) IC2 IC Voltage regulator
83 EMU0 I/O Emulator 0 (to JTAG connector) IC3 IC DC amplifier
84 EMU1/OFF I/O Emulator 1 (to JTAG connector) Q1,2 Transistor RF amplifier
85 TDO O Test data output (to JTAG connector) Q3 FET RF amplifier
86 TDI I Test data input (to JTAG connector) Q4 FET TX drive amplifier
87 TRST I Test reset (to JTAG connector) Q5 FET Final amplifier
88 TCK I Test clock (to JTAG connector) Q7 FET RF switch
89 TMS I Test mode select (to JTAG connector) Q8,9 Transistor DC switch
90 NC14 – Not used (No connection) D2 Zener diode Voltage reference
91 CVDD – VDD for core CPU (+1.8V) D3 Diode Surge absorption
92 HPIENA I Not used (Pull up) D4,5 Diode RF detector
93 Vss – GND D7 Zener diode Surge protector
94 CLKOUT O Not used (No connection) D8 Diode Reverse current protection
95 HD4 I/O HPI data bus D9 Varistor Current protector
96 X1 – 16.515MHz (System clock) D10 Diode Surge protector
97 X2/CLKIN – 16.515MHz (System clock) D51,52 Diode Reverse connection protection
98 RS I DSP reset input
99~104 D0~D5 – Not used (No connection)
105 A6 O Not used (No connection) Display Unit (X54-3330-20)
106 Vss – GND
Ref No. Part name Description
107~109 A7~A9 O Not used (No connection)
IC501 MOS IC MIC amplifier
110 NC15 – Not used (No connection)
IC502~505 MOS IC Shift registers
111 Vss – GND
IC506,507 MOS IC Voltage regulator
112 DVDD – VDD for I/O pins (+3.3V)
Q501,502 Transistor Level controller
113~119 D6~D12 – Not used (No connection)
Q504 FET DC switch
120 HD5 I/O HPI data bus
Q506 Transistor DC switch
121~123 D13~D15 – Not used (No connection)
Q507 FET DC switch
124 HD6 I/O HPI data bus
Q508 Transistor DC switch
125 CVDD – VDD for core CPU (+1.8V)
Q510,511 Transistor DC switch
126 NC16 – Not used (No connection)
Q512~514 FET DC switch
127 HDS1 I HPI data strobe 1 (Pull up)
Q516~519 FET DC switch
128 Vss – GND
Q521~524 FET DC switch
129 HDS2 I HPI data strobe 2 (Pull down)
Q525 FET PTO switch
130 DVDD – VDD for I/O pins (+3.3V)
D501,502 Diode AF detector
131~134 A10~A13 O Not used (No connection)
D503~505 LED LED
135 HD7 I/O HPI data bus
D506,507 LED 7 segment
136~141 A14~A19 O Not used (No connection)
D508~514 Diode Surge absorption
142 CVDD – VDD for core CPU (+1.8V)
D601,602 Diode Surge absorption
143,144 NC17,NC18 – Not used (No connection)
D603 Varistor Current protector
26
TKR-850
DESCRIPTION OF COMPONENTS
27
TKR-850
PARTS LIST
New Parts. indicates safety critical components. L : Scandinavia K : USA P : Canada
*
Parts without Parts No. are not supplied. Y : PX (Far East, Hawaii) T : England E : Europe
Les articles non mentionnes dans le Parts No. ne sont pas fournis. Y : AAFES (Europe) X: Australia M: Other Areas
Teile ohne Parts No. werden nicht geliefert.
TKR-850
FINAL UNIT (X45-3630-XX)
New Desti- New Desti-
Ref. No. Address parts Parts No. Description Ref. No. Address parts Parts No. Description nation
nation
54 1F H25-0747-04 PROTECTION BAG (250X350)
TKR-850 55 1E H25-0762-04 PROTECTION BAG (120X300)
1 2B ✽ A10-4037-11 CHASSIS ADC12 56 1F ✽ H25-2328-04 PROTECTION BAG (80/250/0.07)
2 1B ✽ A62-0836-04 PANEL TX-RX 57 3F ✽ H52-1779-02 ITEM CARTON CASE
3 1B ✽ A62-0837-04 PANEL FINAL
4 1D ✽ A62-0840-03 PANEL OUTER 59 1E J02-0475-05 FOOT
5 3A ✽ A62-0933-13 PANEL ASSY 60 1E ✽ J02-0492-04 FOOT
61 1F ✽ J21-8402-04 HARDWARE FIXTURE (ACC)
6 3C ✽ A62-0934-03 PANEL ASSY 62 1E ✽ J59-0302-05 GROMMET
28
TKR-850
PARTS LIST
FINAL UNIT (X45-3630-XX)
New Desti- New Desti-
Ref. No. Address parts Parts No. Description Ref. No. Address parts Parts No. Description
nation nation
C25 CK73FB1E104K CHIP C 0.10UF K C99 CK73FB1E104K CHIP C 0.10UF K
C26 CC73GCH1H101J CHIP C 100PF J C100-102 CK73GB1H471K CHIP C 470PF K
C27 CK73GB1H471K CHIP C 470PF K C103 C92-0628-05 CHIP-TAN 10UF 10WV
C28 CK73FB1E104K CHIP C 0.10UF K C104 CC73GCH1H101J CHIP C 100PF J
C29 CK73GB1H471K CHIP C 470PF K C105 CK73GB1H471K CHIP C 470PF K
29
TKR-850
PARTS LIST
FINAL UNIT (X45-3630-XX)
DISPLAY UNIT (X54-3330-20)
30
TKR-850
PARTS LIST
DISPLAY UNIT (X54-3330-20)
TX-RX UNIT (X57-6270-XX)
New Desti- New Desti-
Ref. No. Address parts Parts No. Description Ref. No. Address parts Parts No. Description
nation nation
Q502 2SA1586(Y,GR) TRANSISTOR C66,67 CC73GCH1H331J CHIP C 330PF J K3
Q504 UPA672T FET C68-70 CK73GB1C104K CHIP C 0.10UF K
Q506 DTA114EUA DIGITAL TRANSISTOR C71 CK73GB1H103K CHIP C 0.010UF K
Q507 UPA672T FET C72 C92-0628-05 CHIP-TAN 10UF 10WV
Q508 DTA114EUA DIGITAL TRANSISTOR C73 CK73GB1C104K CHIP C 0.10UF K K3
31
TKR-850
PARTS LIST
TX-RX UNIT (X57-6270-XX)
C174 C92-0008-05 CHIP-TAN 3.3UF 16WV C706 C92-0628-05 CHIP-TAN 10UF 10WV
C175 CK73GB1H102K CHIP C 1000PF K C707-709 CK73GB1E103K CHIP C 0.010UF K
C176 CK73GB1H103K CHIP C 0.010UF K C710 C92-0628-05 CHIP-TAN 10UF 10WV
C177 CK73GB1H471K CHIP C 470PF K C711 CK73GB1H471K CHIP C 470PF K
C178 C92-0606-05 CHIP-TAN 4.7UF 10WV C712 CK73GB1E103K CHIP C 0.010UF K
32
TKR-850
PARTS LIST
TX-RX UNIT (X57-6270-XX)
New Desti- New Desti-
Ref. No. Address parts Parts No. Description Ref. No. Address parts Parts No. Description
nation nation
C772 C92-0633-05 CHIP-TAN 22UF 10WV L2 ✽ L79-1782-05 HELICAL BLOCK K3
C773 C92-0514-05 CHIP-TAN 2.2UF 10WV L3 L40-1575-34 SMALL FIXED INDUCTOR (15NH) K2
C774 CK73FB1C105K CHIP C 1.0UF K L3 L40-1875-34 SMALL FIXED INDUCTOR (18NH) K,E
C775-779 C92-0519-05 CHIP-TAN 1.0UF 25WV L3 L40-2275-34 SMALL FIXED INDUCTOR (22NH) K3
C780-782 CK73FB1C105K CHIP C 1.0UF K L4,5 ✽ L79-1771-05 HELICAL BLOCK K,E
C789 CE04EW1E331M ELECTRO 330UF 25WV L11 L40-1885-34 SMALL FIXED INDUCTOR (180NH)
C790 CC73GCH1H101J CHIP C 100PF J L12 L40-3381-37 SMALL FIXED INDUCTOR (0.330UH)
C791 CK73GB1H471K CHIP C 470PF K L13 L40-1005-34 SMALL FIXED INDUCTOR (10UH)
C792-794 CK73GB1H102K CHIP C 1000PF K L14 L34-4527-05 COIL
C795 CC73GCH1H101J CHIP C 100PF J L15 L34-4526-05 COIL
C802-805 CK73GB1H102K CHIP C 1000PF K L23 L40-1095-34 SMALL FIXED INDUCTOR (1UH)
C806 CE04EW1E470M ELECTRO 47UF 25WV L24 L34-4530-05 COIL
C807-810 CK73GB1H102K CHIP C 1000PF K L25 L40-2775-34 SMALL FIXED INDUCTOR (27NH)
C811 CE04EW1E470M ELECTRO 47UF 25WV L26 L40-1575-34 SMALL FIXED INDUCTOR (15NH) K,K2,E
C812,813 CK73GB1H102K CHIP C 1000PF K L26-28 L40-2275-34 SMALL FIXED INDUCTOR (22NH) K3
C814 C92-0777-05 ELECTRO 1000UF 25WV L27 L40-2275-34 SMALL FIXED INDUCTOR (22NH) K,E
C815 CK73FB1E104K CHIP C 0.10UF K L27,28 L40-1875-34 SMALL FIXED INDUCTOR (18NH) K2
C816 CK73GB1H102K CHIP C 1000PF K L28 L40-1875-34 SMALL FIXED INDUCTOR (18NH) K,E
C817 CE04EW1E470M ELECTRO 47UF 25WV L29,30 L40-1875-92 SMALL FIXED INDUCTOR (18NH) K,K2,E
C818-820 CK73GB1H102K CHIP C 1000PF K L29,30 L40-2275-92 SMALL FIXED INDUCTOR (22NH) K3
C821,822 CC73GCH1H101J CHIP C 100PF J L31,32 L40-1005-34 SMALL FIXED INDUCTOR (10UH)
C823 C92-0619-05 CHIP-TAN 47UF 4WV L33 L40-1575-92 SMALL FIXED INDUCTOR (15NH)
C824 CK73GB1H472K CHIP C 4700PF K L34 L40-1005-34 SMALL FIXED INDUCTOR (10UH)
C825 CK73GB1C104K CHIP C 0.10UF K L35-39 L92-0140-05 FERRITE CHIP
C826 C92-0560-05 CHIP-TAN 10UF 6.3WV L40 L92-0158-05 FERRITE CHIP
33
TKR-850
PARTS LIST
TX-RX UNIT (X57-6270-XX)
R56 RK73GB1J682J CHIP R 6.8K J 1/16W R135 RK73GB1J5R6J CHIP R 5.6 J 1/16W
R57 RK73GB1J182J CHIP R 1.8K J 1/16W K,K2,E R136 RK73GB1J821J CHIP R 820 J 1/16W
R57 RK73GB1J332J CHIP R 3.3K J 1/16W K3 R137,138 RK73GB1J102J CHIP R 1.0K J 1/16W
R58 RK73GB1J153J CHIP R 15K J 1/16W R139-142 R92-1252-05 CHIP R 0 OHM
R59 RK73GB1J223J CHIP R 22K J 1/16W K,K2,E R143 RK73GB1J102J CHIP R 1.0K J 1/16W
R60 RK73GB1J103J CHIP R 10K J 1/16W R144 RK73GB1J472J CHIP R 4.7K J 1/16W
R61 RK73GB1J274J CHIP R 270K J 1/16W R145 RK73FB2A470J CHIP R 47 J 1/10W
R62 RK73GB1J222J CHIP R 2.2K J 1/16W R148 RK73GB1J472J CHIP R 4.7K J 1/16W
R63 RK73GB1J183J CHIP R 18K J 1/16W R150 RK73GB1J180J CHIP R 18 J 1/16W
R64 RK73GB1J220J CHIP R 22 J 1/16W K,K2,E R151-158 RK73GB1J102J CHIP R 1.0K J 1/16W
R65 RK73GB1J392J CHIP R 3.9K J 1/16W K3 R160,161 RK73GB1J471J CHIP R 470 J 1/16W
R65 RK73GB1J472J CHIP R 4.7K J 1/16W K,K2,E R162-164 RK73GB1J271J CHIP R 270 J 1/16W
R66 RK73GB1J334J CHIP R 330K J 1/16W R165 RK73GB1J471J CHIP R 470 J 1/16W
R67 RK73GB1J102J CHIP R 1.0K J 1/16W K,K2,E R166 RK73GB1J223J CHIP R 22K J 1/16W
R67 RK73GB1J560J CHIP R 56 J 1/16W K3 R168 RK73GB1J271J CHIP R 270 J 1/16W K3
R68 RK73GB1J332J CHIP R 3.3K J 1/16W R168 R92-1252-05 CHIP R 0 OHM K,K2,E
R69 RK73GB1J392J CHIP R 3.9K J 1/16W R169 RK73GB1J392J CHIP R 3.9K J 1/16W K3
R70 RK73GB1J102J CHIP R 1.0K J 1/16W K3 R170 R92-1252-05 CHIP R 0 OHM K,K2,E
R71 RK73GB1J104J CHIP R 100K J 1/16W K,K2,E R171-174 R92-1252-05 CHIP R 0 OHM K3
R71 RK73GB1J823J CHIP R 82K J 1/16W K3 R174,175 R92-1252-05 CHIP R 0 OHM K,K2,E
R72 RK73GB1J334J CHIP R 330K J 1/16W K3 R175 RK73GB1J391J CHIP R 390 J 1/16W K3
R72 RK73GB1J393J CHIP R 39K J 1/16W K,K2,E R176 RK73GB1J473J CHIP R 47K J 1/16W K3
R73 RK73GB1J474J CHIP R 470K J 1/16W R177-179 R92-1252-05 CHIP R 0 OHM K,K2,E
R74,75 RK73GB1J220J CHIP R 22 J 1/16W R178 R92-1252-05 CHIP R 0 OHM K3
R76 RK73GB1J104J CHIP R 100K J 1/16W R600 RK73GB1J473J CHIP R 47K J 1/16W
34
TKR-850
PARTS LIST
TX-RX UNIT (X57-6270-XX)
New Desti- New Desti-
Ref. No. Address parts Parts No. Description Ref. No. Address parts Parts No. Description
nation nation
R601 R92-0670-05 CHIP R 0 OHM R707-709 RK73GB1J223J CHIP R 22K J 1/16W
R602 RK73GB1J472J CHIP R 4.7K J 1/16W R710 RK73GB1J473J CHIP R 47K J 1/16W
R603 RK73GB1J102J CHIP R 1.0K J 1/16W R712 RK73GB1J473J CHIP R 47K J 1/16W
R604 RK73GB1J333J CHIP R 33K J 1/16W R713 RK73GB1J273J CHIP R 27K J 1/16W
R605 RK73GB1J104J CHIP R 100K J 1/16W R714 RK73GB1J223J CHIP R 22K J 1/16W
R606 RK73GB1J473J CHIP R 47K J 1/16W R715 RK73GB1J103J CHIP R 10K J 1/16W
R607-613 R92-1252-05 CHIP R 0 OHM R717,718 RK73GB1J473J CHIP R 47K J 1/16W
R614 RK73GB1J473J CHIP R 47K J 1/16W R719 RK73GB1J104J CHIP R 100K J 1/16W
R615 R92-1252-05 CHIP R 0 OHM R720 RK73GB1J473J CHIP R 47K J 1/16W
R616 RK73GB1J473J CHIP R 47K J 1/16W R721 RK73GB1J223J CHIP R 22K J 1/16W
R638 RK73GB1J102J CHIP R 1.0K J 1/16W R735 RK73GB1J333J CHIP R 33K J 1/16W
R639 R92-1252-05 CHIP R 0 OHM R736,737 RK73GB1J473J CHIP R 47K J 1/16W
R640 RK73GB1J102J CHIP R 1.0K J 1/16W R738 RK73GB1J274J CHIP R 270K J 1/16W
R641 R92-1252-05 CHIP R 0 OHM R739 RK73GB1J103J CHIP R 10K J 1/16W
R642 RK73GB1J102J CHIP R 1.0K J 1/16W R740 RK73GB1J104J CHIP R 100K J 1/16W
R643 RK73GB1J473J CHIP R 47K J 1/16W R741 RK73GB1J154J CHIP R 150K J 1/16W
R644 RK73GB1J102J CHIP R 1.0K J 1/16W R742 R92-0670-05 CHIP R 0 OHM
R645,646 RK73GB1J473J CHIP R 47K J 1/16W R743 RK73GB1J473J CHIP R 47K J 1/16W
R647-652 RK73GB1J102J CHIP R 1.0K J 1/16W R744 RK73GB1J393J CHIP R 39K J 1/16W
R653,654 R92-0670-05 CHIP R 0 OHM R745 RK73GB1J473J CHIP R 47K J 1/16W
R655 RK73GB1J473J CHIP R 47K J 1/16W R747 RK73GB1J103J CHIP R 10K J 1/16W
R656 RK73GB1J102J CHIP R 1.0K J 1/16W R749-752 R92-1252-05 CHIP R 0 OHM
R657-661 RK73GB1J473J CHIP R 47K J 1/16W R753,754 RK73GB1J473J CHIP R 47K J 1/16W
R662 RK73GB1J102J CHIP R 1.0K J 1/16W R755,756 R92-0670-05 CHIP R 0 OHM
R663-667 RK73GB1J473J CHIP R 47K J 1/16W R758 RK73GB1J103J CHIP R 10K J 1/16W
R668 RK73GB1J183J CHIP R 18K J 1/16W R760 RK73GB1J122J CHIP R 1.2K J 1/16W
R669-671 RK73GB1J223J CHIP R 22K J 1/16W R762 RK73GB1J472J CHIP R 4.7K J 1/16W
R672-674 RK73GB1J104J CHIP R 100K J 1/16W R763 RK73GB1J103J CHIP R 10K J 1/16W
R675 RK73GB1J333J CHIP R 33K J 1/16W R764,765 RK73GB1J102J CHIP R 1.0K J 1/16W
R676 RK73GB1J823J CHIP R 82K J 1/16W R766 RK73GB1J122J CHIP R 1.2K J 1/16W
R678 RK73GB1J104J CHIP R 100K J 1/16W R767 RK73GB1J473J CHIP R 47K J 1/16W
R679,680 RK73GB1J223J CHIP R 22K J 1/16W R768 RK73GB1J122J CHIP R 1.2K J 1/16W
R681 RK73GB1J183J CHIP R 18K J 1/16W R769,770 R92-0670-05 CHIP R 0 OHM
R682 RK73GB1J153J CHIP R 15K J 1/16W R771 RK73GB1J122J CHIP R 1.2K J 1/16W
R683 RK73GB1J124J CHIP R 120K J 1/16W R772 RK73GB1J473J CHIP R 47K J 1/16W
R684 RK73GB1J473J CHIP R 47K J 1/16W R773 RK73GB1J102J CHIP R 1.0K J 1/16W
R685,686 RK73GB1J104J CHIP R 100K J 1/16W R774 RK73GB1J105J CHIP R 1.0M J 1/16W
R687 RK73GB1J223J CHIP R 22K J 1/16W R775 RK73GB1J473J CHIP R 47K J 1/16W
R688-690 RK73GB1J473J CHIP R 47K J 1/16W R776 RK73GB1J102J CHIP R 1.0K J 1/16W
R691-693 R92-1252-05 CHIP R 0 OHM R777 RK73GB1J473J CHIP R 47K J 1/16W
R694,695 RK73GB1J101J CHIP R 100 J 1/16W R778 RK73GB1J102J CHIP R 1.0K J 1/16W
R696 RK73GB1J103J CHIP R 10K J 1/16W R779 RK73GB1J473J CHIP R 47K J 1/16W
R697 RK73GB1J101J CHIP R 100 J 1/16W R780 RK73GB1J102J CHIP R 1.0K J 1/16W
R698 RK73GB1J103J CHIP R 10K J 1/16W R781 RK73GB1J471J CHIP R 470 J 1/16W
R699 R92-1252-05 CHIP R 0 OHM R782 RK73GB1J473J CHIP R 47K J 1/16W
R700 RK73GB1J101J CHIP R 100 J 1/16W R783 RK73GB1J102J CHIP R 1.0K J 1/16W
R701 R92-1252-05 CHIP R 0 OHM R784 RK73GB1J473J CHIP R 47K J 1/16W
R702 RK73GB1J473J CHIP R 47K J 1/16W R785 RK73GB1J102J CHIP R 1.0K J 1/16W
R703 R92-1252-05 CHIP R 0 OHM R786 RK73GB1J473J CHIP R 47K J 1/16W
R704-706 RK73GB1J473J CHIP R 47K J 1/16W R787 RK73GB1J102J CHIP R 1.0K J 1/16W
35
TKR-850
PARTS LIST
TX-RX UNIT (X57-6270-XX)
RX PLL/VCO (X58-4800-XX)
36
TKR-850
PARTS LIST
RX PLL/VCO (X58-4800-XX)
TX PLL/VCO (X58-4810-XX)
New Desti- New Desti-
Ref. No. Address parts Parts No. Description Ref. No. Address parts Parts No. Description
nation nation
C312 CC73GCH1H060D CHIP C 6.0PF D K2 R300 RK73GB1J100J CHIP R 10 J 1/16W
C312 CC73GCH1H070D CHIP C 7.0PF D K,E R301-304 RK73GB1J101J CHIP R 100 J 1/16W
C312 CC73GCH1H080D CHIP C 8.0PF D K3 R305 R92-1252-05 CHIP R 0 OHM
C314 CC73GCH1H120J CHIP C 12PF J K,E R306 RK73GB1J220J CHIP R 22 J 1/16W
C314 CC73GCH1H150J CHIP C 15PF J K2 R308 RK73GB1J560J CHIP R 56 J 1/16W
C314 CC73GCH1H180J CHIP C 18PF J K3 R309 RK73GB1J331J CHIP R 330 J 1/16W K,K3,E
C315 CK73FB1H473K CHIP C 0.047UF K R309 RK73GB1J391J CHIP R 390 J 1/16W K2
C317 CC73GCH1H060D CHIP C 6.0PF D K2 R310 RK73GB1J332J CHIP R 3.3K J 1/16W
C317 CC73GCH1H070D CHIP C 7.0PF D K,E R311 RK73GB1J103J CHIP R 10K J 1/16W
C317 CC73GCH1H080D CHIP C 8.0PF D K3 R312 RK73GB1J331J CHIP R 330 J 1/16W K,K3,E
C318 C92-0514-05 CHIP-TAN 2.2UF 10WV R312 RK73GB1J391J CHIP R 390 J 1/16W K2
C319 CK73GB1H471K CHIP C 470PF K R313 RK73GB1J222J CHIP R 2.2K J 1/16W
C320 C92-0514-05 CHIP-TAN 2.2UF 10WV R314 RK73GB1J474J CHIP R 470K J 1/16W
C321 CC73GCH1H040C CHIP C 4.0PF C R315 RK73GB1J151J CHIP R 150 J 1/16W
C322 CK73GB1H471K CHIP C 470PF K R316 RK73FB2A152J CHIP R 1.5K J 1/10W
C358,359 CC73GCH1H1R5B CHIP C 1.5PF B R357 RK73GB1J181J CHIP R 180 J 1/16W K,K3,E
C360,361 CK73FB1E104K CHIP C 0.10UF K R358,359 RK73GB1J470J CHIP R 47 J 1/16W
C362 CC73GCH1H220G CHIP C 22PF G R360-363 RK73GB1J472J CHIP R 4.7K J 1/16W
C363 CC73GCH1H150G CHIP C 15PF G K,K3,E R364 RK73GB1J103J CHIP R 10K J 1/16W
C363 CC73GCH1H180G CHIP C 18PF G K2 R365 RK73GB1J333J CHIP R 33K J 1/16W
37
TKR-850
PARTS LIST
TX PLL/VCO (X58-4810-XX)
38
TKR-850 TKR-850
EXPLODED VIEW
A B C D
A : N09-2292-05
B ø3 (FW) : N15-1030-46
C M2.6 x 6 : N30-2606-46 3
D M4 x 6 : N30-4006-46 Mx14
E M4 x 14 : N30-4014-46 4
F M4 x 20 BLK : N30-4020-45
G M3 x 6 (F) : N32-3006-46 2 Jx6
1 H M4 x 8 (F) BLK : N32-4008-45
J M3 x 6 (OC) BLK : N33-3006-45 Jx6
L M3 x 14 (Bi) : N35-3014-46
N M3 x 8 : N67-3008-46
M M4 x 6 (Bi) BLK : N35-4006-45
702
O M2.6 x 6 (Br-Tap) : N87-2606-46 21
P M3 x 5 (Br-Tap) BLK : N87-3005-45 30 42
Q M3 x 6 (Br-Tap) BLK : N87-3006-45 20 26
701
27 28 15 Cx2 38
Gx2
44 Qx11 Nx3 Ox4
Fx4
Qx10 G Ax2
700
36x2 37
Ox2 48
TX-RX Final
(A/2) (A/2) Cx2
Dx3 14 Final
(B/2) 22
1 16
Lx2
Bx2 34 G 703 705
2
Gx2
12 29
Ex3
47 Ex3 704
Qx6
Dx3
TX-RX 33
(B/2)
24 47
Px4 23 IC629
69 Nx2 12
Hx3
Qx3
Hx3 704
Qx5
3
46 706
Display
Display (B/2)
67 (A/2)
66 48x2
5 6
65
Parts with the exploded numbers larger than 700 are not supplied. 40
TKR-850
PACKING
E F
53 Protection bag (H25-0029-04)
59 Foot (J02-0475-05) x 2 49 Cushion (G13-1801-04)
60 Foot (J02-0492-04) x 2 50 Cushion (G13-1802-04)
62 Grommet (J59-0302-05) x 2 54 Protetion bag (H25-0747-04)
D Binding head machine screw (N30-4006-46) x 2 61 Hardware fixture (J21-8402-04)
K Binding head machine screw (N35-3006-45) x 5
707 Pamphlet : E
708 Warranty card : K,K2
11 Instruction manual
(B62-1327-10)
1
64 Handle
(K01-0418-05)
17 DC cord
(E30-3427-15) 8 Front glass
55 Protection bag (B10-2635-04)
(H25-0762-04) 10 Filter
(B11-1259-04)
56 Protection bag
(H25-2328-04)
2
BA
CK
UP
713
Packing fixture
711
Packing fixture
Parts with the exploded numbers larger than 700 are not supplied. 41
TKR-850
ADJUSTMENT
• Test cable for local microphone • The following test cables are recommended.
1 : NC Plug cord
2 : +B Part No. E30-3360-08
3 : GND
4 : PTT/TXD1 (PC serial data from radio)
5 : MIC GND
6 : MIC
7 : HOOK/RXD1 (PC serial data to radio)
8pin
1 8 8 : NC
HOOK
(BRN)
RX TX RX TX RX TX RX TX
1 450.10 450.00 440.10 440.00 480.10 480.00 400.10 400.00 Test cable for microphone input
2 465.10 465.00 455.10 455.00 496.10 496.00 415.10 415.00
3 479.90 480.00 469.90 470.00 511.90 512.00 429.90 430.00 To connect the TX-RX unit A/2 (CN14) to the TX-RX unit
4 455.10 455.00 445.10 445.00 485.10 485.00 405.10 405.00 B/2 (CN602) while in servicing, you can use the 36-pin flat
cable, E37-0979-05, which is available from the KENWOOD
5 460.10 460.00 450.10 450.00 490.10 490.00 410.10 410.00
parts center.
6 470.10 470.00 460.10 460.00 500.10 500.00 420.10 420.00
7 475.10 475.00 465.10 465.00 505.10 505.00 425.10 425.00
8 462.60 462.50 452.60 452.50 493.60 493.50 412.60 412.50
9 467.60 467.50 457.60 457.50 498.60 498.50 417.60 417.50
10 440.10 440.00 459.90 460.00 499.90 500.00 419.90 420.00
11 459.90 460.00 479.90 480.00 519.90 520.00 439.90 440.00
Flat cable (36-pin) about 256mm
42
TKR-850
ADJUSTMENT
Measurement Adjustment
Item Condition Test- Specifications/Remarks
equipment Unit Terminal Unit Parts Method
4. RX PLL lock 1) RX VCO A high DVM TX-RX RX-CV RX VCO TC350 1.50V ± 0.1V
voltage CH : 11 K (A/2) (A3)
CH : 10 K2,K3,E
7. Setting 1) Remove 8 pin cable and the coaxial cable from CN16, and CN19 on TX-RX side.
9. Setting 1) Insert 8 pin cable and the coaxial cable to CN16, and CN19 on TX-RX side.
10. Maximum 1) Measure the RF power at Power meter Rear TX ANT Final VR1 Adjust the RF power ± 1W
power TX ANT. to 43W.
limitting High CH
43
TKR-850
ADJUSTMENT
Measurement Adjustment
Item Condition Test- Specifications/Remarks
equipment Unit Terminal Unit Parts Method
12. TX RF 1) Measure the power level at Power meter Rear TX ANT PC adj. ± 1W
low power TX ANT. 25W
Low CH (Shipping power)
2) Center CH
3) High CH
13. BPF 1) Connect the TG to RX ANT, Tracking Rear RX ANT TX-RX L2 Center the frequency
then connect CN1 to the generator (A/2) L4 you are using, then
spectrum analyzer input. L5 adjust it to look like
Spectrum analyzer setting Spectrum TX-RX CN1 the wave Fig. 1.
Span : 50MHz analyzer (A/2) (Page 48)
Scale : 10dB to 5dB div
Tracking generator setting
Output : –30dBm
14. MCF 1) Connect the TG to CN2, then CN2 L14 Adjust it to look like
(Wide) connect CN4 to the spectrum CN4 L17 the wave Fig. 2.
analyzer input. L18 (Page 48)
CH : 2 (Wide)
Spectrum analyzer setting
Span : 50kHz to 25kHz
Scale : 10dB to 2dB div
Center freq‘ : 44.850MHz
Tracking generator setting
Output : –30dBm
15. Discrimi- 1) Connect the SSG to RX ANT. SSG Rear RX ANT L24 Adjust the distortion
nator CH : 2 (Wide) to minimum.
SSG output : –53dBm/501µV AF VM TEST/SPKR
SSG MOD : 1kHz Distortion jack SPO
SSG DEV : 3kHz meter (pin 12)
AF : 2V/4Ω
44
TKR-850
ADJUSTMENT
Measurement Adjustment
Item Condition Test- Specifications/Remarks
equipment Unit Terminal Unit Parts Method
18. RD outut 1) Connect SSG to RX ANT. SSG Rear RX ANT PC adj. ± 5mV
level CH : 2 (Wide) 80mV
(Wide) SSG output : –53dBm/501µV DVM CONTROL
SSG MOD : 1kHz I/O jack
SSG DEV : 1.5kHz RD
(pin 10)
(Narrow) 2) CH : 2 (Narrow) 4.7kΩ load
SSG output : –53dBm/501µV
SSG MOD : 1kHz
SSG DEV : 1.5kHz
19. RA outut 1) Connect SSG to RX ANT. SSG Rear RX ANT PC adj. ± 20mV
level CH : 2 (Wide) 400mV
(Wide) SSG output : –53dBm/501µV DVM CONTROL
SSG MOD : 1kHz I/O jack
SSG DEV : 1.5kHz RA
(pin 11)
(Narrow) 2) CH : 2 (Narrow) 4.7kΩ load
SSG output : –53dBm/501µV
SSG MOD : 1kHz
SSG DEV : 1.5kHz
20. Maximum 1) Connect AG to the MIC terminal. MOD ANA Rear TX OUT PC adj. ± 0.1kHz
deviation Low CH (TX VCO low) or 4.1kHz
(Wide) Center CH (VCO center) Deviation
High CH (TX VCO high) meter
Deviation meter filter Oscilloscope
HPF : OFF
LPF : 15kHz AG Front MIC
De-emphasis : OFF AF VTVM
AG : 1kHz/50mV (Terminal load)
Transmission
45
TKR-850
ADJUSTMENT
Measurement Adjustment
Item Condition Test- Specifications/Remarks
equipment Unit Terminal Unit Parts Method
46
TKR-850
ADJUSTMENT
Measurement Adjustment
Item Condition Test- Specifications/Remarks
equipment Unit Terminal Unit Parts Method
26. TA (TX 1) Insert AG output into the MOD ANA Rear TX ANT PC adj. ± 0.1kHz
audio input) control I/O TA terminal (pin 9). or 3.0kHz
deviation CH : 2 Deviation
(Wide) Deviation meter filter meter
HPF : OFF Oscilloscope
LPF : 15kHz
De-emphasis : OFF AG CONTROL
AG freq‘ : 1kHz (Sine wave) AF VTVM I/O jack
AG level : 280mV TA (pin 9)
Transmission
27. TD 1) Insert AG output into the MOD ANA Rear TX ANT PC adj. ± 0.1kHz
deviation control I/O TD terminal (pin 8). or 0.75kHz
(Wide) CH : 2 Deviation
Deviation meter filter meter
HPF : OFF Oscilloscope
LPF : 3kHz
De-emphasis : OFF AG CONTROL
AG freq‘ : 100Hz (Sine wave) AF VTVM I/O jack
AG level : 0.5Vp-p (177mVrms) TD (pin 8)
Transmission
(Narrow) 1) CH : 2
Transmission
47
TKR-850
ADJUSTMENT
ATTEN 20dB MKR –26.17dBm ATTEN 10dB MKR –42.17dB ATTEN 10dB MKR –46.000dB
RL 10.0dBm 10dB/ 465.00MHz RL –32.0dBm 10dB/ 25.00kHz RL –32.0dBm 10dB/ 15.00kHz
More than More than
3dB Max. 3.75kHz 3.75kHz
3dB Max. 5.5~7.5kHz 5.5~7.5kHz 3dB Max. 5.5~7.5kHz 5.5~7.5kHz
MKR MKR MKR
465.00MHz
D –26.17dBm D 25.00kHz D 15.00kHz
–42.17dB –46.000dB
More than
More than More than 40dB
40dB 40dB
15kHz 15kHz
15kHz
G G G
CENTER SPAN 50.00MHz CENTER 44.85000MHz SPAN 50.00kHz CENTER 44.85000MHz SPAN 50.00kHz
RBW 300kHz *VBW 300kHz SWP 50ms RBW 300Hz *VBW 1.0kHz SWP 2.0sec RBW 300Hz *VBW 1.0kHz SWP 2.0sec
Adjustment Points
CN7 BACKUP Q5
(ORANGE)
CN2
CN1 RX
TX IN
VR1
CN5 CN3
8
1
L2 L4 L5 CN16 CN19
TC351 (VCO B)
CN1
L16 (K3 TYPE)
2
1
L19
1
L15
3
1
CN4 CN2
CN15
NARROW
L24
WIDE
CN3 TC350 (VCO A)
L18 L17 L14
A3 : RX VCO (X58-480)
TP101
TX-RX UNIT (X57-627) (A/2) RX CV TC351 (VCO B)
Component side view
48
TKR-850
TERMINAL FUNCTION
49
TKR-850
TERMINAL FUNCTION
Connector Terminal Terminal I/O Terminal function TX-RX Unit (X57-6270-XX) (B/2) : Control Section
No. No. Name
Connector Terminal Terminal I/O Terminal function
10 EPR I Enable input for RX PLL
No. No. Name
11 EPT I Enable input for TX PLL
CN600 1 SB O Power supply output after power
12 LDR O Lock detector for RX PLL
switch
13 LDT O Lock detector for TX PLL
To X54 2 SB O Power supply output after power
14 DT I Data input
(B/2) switch
15 CK I Clock input
display 3 GND – Ground
16 STB4 I Strobe input for shift register
unit 4 NC – No Connection
17 FWD O RF power down signal output
5 DAT O Serial data output
18 LD2 I Latch data input for DA converter
6 PSW I Power switch input
19 BUP O Backup signal output
7 STB1 O Strobe data for shift register
20 PSW I Power switch input
8 CLK O Clock data output
21 TEMP O High temperature detector signal
9 SOE O Output enable for shift register
output
10 TXD1 I/O PTT input/TXD output
22 SOE I Output enable for shift register
11 K1 I KEY input 1
23 GND – Ground
12 RXD1 I Hook detection input/RXD input
24 MB I Modulation signal input for VCXO
13 K2 I KEY input 2
25 MO I Modulation signal input for VCO
14 K3 I KEY input 3
26 GND – Ground
15 K4 O KEY output 4
27 GND – Ground
16 K5 O KEY output 5
28 NC – No connection
17 VLI I Volume control input for AF signal.
29 NC – No connection
18 5C O Common 5V output
30 SB O Power supply output after power
19 MIG – Mic ground
switch
20 MIC I MIC signal input
31 SB O Power supply output after power
CN601 1 TXI I MIC signal input
switch
2 TXO O MIC signal output
32 SB O Power supply output after power
To 3 RXI I RX audio signal input
switch
optional 4 AC O Audio control signal output
33 SB O Power supply output after power
board 5 BC1 O Scramble code output.
switch
6 BC2 O Scramble code output.
34 NC – No connection
7 BC3 O Scramble code output.
35 8C O Common 8V output
8 BC4 O Scramble code output.
36 8C O Common 8V output
9 PTI I PTT signal input
CN15 1 E – Earth
10 CLRC O Clear code for scramble
2 B I Power supply input
11 RXO O RX audio signal output
3 B I Power supply input
12 PTO O PTT signal output
CN16 1 E – Earth
13 5C O Common 5V output
2 RSW – Reserved
14 GND – Ground
To X45 3 8T O 8V output during transmission
CN602 1 8C I Common 8V input
final 4 PC O TX power control signal output
2 8C I Common 8V input
unit 5 FAS O Fan control signal output
To X57 3 NC – No connection
6 PDT I RF power down signal input
(A/2) 4 SB I Power supply input after power switch
7 BAT I Main DC/BACKUP status input
TX-RX 5 SB I Power supply input after power switch
8 VTH I High temperature detector signal
unit 6 SB I Power supply input after power switch
input
7 SB I Power supply input after power switch
CN18 1 RX IN I Receive signal input (Coaxial)
8 NC – No connection
CN19 1 DO O Transmission signal output (Coaxial)
9 NC – No connection
10 GND – Ground
11 GND – Ground
12 MO O Modulation signal output for VCO
13 MB O Modulation signal output for VCXO
50
TKR-850
TERMINAL FUNCTION
Connector Terminal Terminal I/O Terminal function Connector Terminal Terminal I/O Terminal function
No. No. Name No. No. Name
14 GND – Ground 9 RD O RX data output (voice & data)
15 SOE O Output enable for shift register 10 IO3 I/O Programable I/O 3
16 TEMP I High temperature detector signal input 11 TA I TX audio input (voice)
17 PSW O Power switch output 12 IO2 I/O Programable I/O 2
18 BUP I Backup signal input 13 TD I TX data input (data or signaling)
19 LD2 O Latch data output for DA converter 14 IO1 I/O Programable I/O 1
20 FWD I RF power down signal input 15 DG – Control line ground
21 STB4 O Strobe output for shift register 16 TXG – TX signal ground
22 CK O Clock output 17 AI3 I Auxiliary input 3 (FPU selectable)
23 DT O Data output 18 NC – No connection
24 LDT I Lock detector for TX PLL 19 AI2 I Auxiliary input 2 (FPU selectable)
25 LDR I Lock detector for RX PLL 20 SC O Squelch control output
26 EPT O Enable output for TX PLL 21 AI1 I Auxiliary input 1 (FPU selectable)
27 EPR O Enable output for RX PLL 22 EPTT I External press-to-talk switch input
28 CP O Clock output for PLL 23 TXD2 O RS-232C output signal (for FPU)
29 DP O Data output for PLL 24 EMON I External monitor switch input
30 NC – No connection 25 RXD2 I RS-232C input signal (for FPU)
31 RSSI I RSSI signal input 26 NC – No connection
32 ASQ I Squelch signal input 27 NC – No connection
33 GND – Ground 28 NC – No connection
34 NC – No connection 29 NC – No connection
35 DET I Detection signal input 30 NC – No connection
36 NC – No connection
CN603 1 SB O Power supply output after power VCO (RX) Unit (X58-4800-XX)
switch
Connector Terminal Terminal I/O Terminal function
To ACC 2 SB O Power supply output after power
No. No. Name
15 pin switch
CN300 1 FIN I Prescaler RF signal input
connector 3 GND – Ground
2 5C I Common 5V input
4 GND – Ground
3 LDR O Lock detector for RX PLL
CN604 1 AO5 O Auxiliary output 5 (FPU selectable)
4 EPR I Enable input for RX PLL
2 AO4 O Auxiliary output 4 (FPU selectable)
5 DP I Data input for PLL
To ACC 3 AO3 O Auxiliary output 3 (FPU selectable)
6 CP I Clock input for PLL
15 pin 4 SPO O External speaker output
7 REF I Reference frequency signal input
connector 5 SPO O External speaker output
CN350 1 GND – Ground
6 AO2 O Auxiliary output 2 (FPU selectable)
2 SRR I Switching signal input for RX VCO
7 AO1 O Auxiliary output 1 (FPU selectable)
3 8CL I 8V input through the ripple filter
8 SPI I Internal speaker input
4 CV I RX PLL lock voltage
9 RSSI O RSSI signal output
5 9CL I 9V input through the ripple filter
10 RD O RX data output
6 NC – No connection
11 SPG – External speaker ground
CN351 1 VO O RX VCO output
12 SPG – External speaker ground
2 GND – Ground
CN605 1 SP O Internal speaker AF output
2 SPG – Internal speaker ground
CN606 1 NC – No connection VCO (TX) Unit (X58-4810-XX)
2 NC – No connection Connector Terminal Terminal I/O Terminal function
To ACC 3 SPM I Speaker mute signal input No. No. Name
25 pin 4 IO6 I/O Programable I/O 6 CN300 1 FIN I Prescaler RF signal input
D-sub 5 RXG – RX signal ground 2 5C I Common 5V input
connector 6 IO5 I/O Programable I/O 5 3 LDT O Lock detector for TX PLL
7 RA O RX audio output (voice) 4 EPT I Enable input for TX PLL
8 IO4 I/O Programable I/O 4 5 DP I Data input for PLL
51
TKR-850
TERMINAL FUNCTION
Connector Terminal Terminal I/O Terminal function Connector Terminal Terminal I/O Terminal function
No. No. Name No. No. Name
6 CP I Clock input for PLL 12 RXG – RX signal ground
7 REF I Reference frequency signal input (for RA,RD ground only)
CN350 1 GND – Ground 13 SPM I Speaker mute signal input
2 STT I Switching signal input for TX VCO “L”: Mute on
3 8CL I 8V input through the ripple filter 14 NC - No connection
4 CV I RX PLL lock voltage 15 EMON I External monitor switch input
5 9CL I 9V input through the ripple filter “L”: Monitor on, “H”: Monitor off
6 MO I Modulation signal input 16 EPTT I External press-to-talk switch input
CN351 1 VO O TX VCO output “L”: PTT on, “H”: PTT off
2 GND – Ground 17 SC O Squelch control output
“L”: Busy, “H”: Not busy
18 NC - No connection
ACC 25 pin D-sub Connector
19 TXG - TX signal ground
Connector Terminal Terminal I/O Terminal function
(for TA,TD ground only)
No. No. Name
20 AIO1 I/O Programmable function input/output 1
1 NC – No connection
21 AIO2 I/O Programmable function input/output 2
2 RXD2 I Serial data to radio
22 AIO3 I/O Programmable function input/output 3
3 TXD2 O Serial data from radio
23 AIO4 I/O Programmable function input/output 4
4 AI1 I Programmable function input 1
24 AIO5 I/O Programmable function input/output 5
5 AI2 I Programmable function input 2
25 AIO6 I/O Programmable function input/output 6
6 AI3 I Programmable function input 3
7 DG – Control line ground
13 12 11 10 9 8 7 6 5 4 3 2 1
8 TD I TX data input (data or signalling)
25 24 23 22 21 20 19 18 17 16 15 14
Input impedance: 600Ω
Coupling: AC coupling
Deviation: 0.75kHz (wide)/
0.35kHz (Narrow)
ACC 15 pin Connector
Connector Terminal Terminal I/O Terminal function
(100Hz 0.5Vp-p input)
No. No. Name
9 TA I TX audio input (voice)
1 SB O Power supply output after power
Input impedance: 600Ω
switch; 1A maximum
Coupling: AC coupling
2 SB O Power supply output after power
Frequency response: Pre-
switch; 1A maximum
emphasis curve
3 NC – No connection
Deviation: 60% deviation
4 GND – Ground
(1kHz 280mVrms ± 25mV input)
5 GND – Ground
10 RD O RX data output (voice & data)
6 SPG – Speaker ground
Output impedance: 1kΩ or less
7 RD O RX data output (Equal to D-sub
Coupling: AC coupling
connector terminal No. 10.)
Non-squelched
8 RSSI O RSSI output (Analog signal output)
Frequency response: ± 2.5dB at
9 SPI I Internal speaker input
10~3000Hz
10 AO1 O Auxiliary output 1
Output level: 70~90mVrms
11 AO2 O Auxiliary output 2
(standard modulation)
12 SPO O External speaker output
11 RA O RX audio output (voice)
13 AO3 O Auxiliary output 3
Output impedance: 1kΩ or less
14 AO4 O Auxiliary output 4
Coupling: AC coupling
15 AO5 O Auxiliary output 5
Squelched
Frequency response: De-
13 10 7 4 1
emphasis curve
14 11 8 5 2
Output level: 360~440mVrms
15 12 9 6 3
(standard modulation)
52
TKR-850 TKR-850
WIRING
53 54
A B C D E F G H I J
2 GND
2 GND
2 GND
2 GND
1
CN351
CN351
CN351
CN351
R368 C379 C379 R368 R368 C379 C379 R368
VO
VO
VO
VO
C377 C377 C377 C377
R365
R365
R365
R365
L362 R360 R360 L362 L362 L362
R366 R366
C372
C372
R366 R366
R361 R361
R362
R362
R363 R363
Q355
Q355
C378 C378 C378 C378
Q355
Q355
Q353 R357 R367 R356 R356 R367 R357 Q353 R376 R376
R364 Q352 Q352 R364 R367 R367
C376
C376
Q354
Q354
C373 L361 R358 C374 L360 L360 C374 R358 L361 C373 L361 C375 R358 R359 C374 L360 L360 C374 R359 R358 C375 L361 2
R377 R377
R359 R359
C371 C375 C370 C370 C375 C371 C371 R375 C370 C370 C371
Q350 Q350 C365 R373 Q350 Q350 R373 C365 R375
Q351 S S S S Q351 Q351 S S S R355 R374 S Q351
C365 R355 R354 C364 C364 R354 R355 C365 R374 R355
C368
C368
C368
C381 C369
C368
C381 C369
C369
C369
C380
D D
C380
R372
R372
L359 L358 L358 L359
C367 C366 C366 C367 C367 L359 C366 C366 L359 C367
L358 L358
C386 C386
L357
L356
L356
L357
L356
L356
L357
L357
3
C355
C356
C362
C362
C356
C355
C363
C363
C356
C362
C362
C356
C355
C363
C363
C355
C358 L355 L354 C359 C359 L354 L355 C358 C358 L355 L354 C359 C359 L354 L355 C358
C383
C383
C382
D350 C360 C360 D350
C352
C383
C383
C352
C382
C361 D351 C360 D353 C361 C361 D351 D353 D353 D351 C361
D353
D352 D352 D352 D352
C357 C354 C354 C357 C357 C354 C354 C357
C350
C350
C350
C350
R351 R351 R351 R351
L350
L353
L352
L352
L353
L351
L350
L350
L351
L353
L352
L352
L353
L351
L350
L351
R353 R353 R353 R353
R352 R352 R352 R352
C351 C351 R350 C351 C351 R350
R350 R350
C353 C353
CN350
CN350
CN350
CN350
GND 1
GND 1
GND 1
GND 1
SRR
SRR
STT
STT
9CL
8CL
8CL
9CL
9CL
8CL
8CL
9CL
MO 6
MO 6
NC
NC
CV
CV
CV
CV
4
6
6
1
7
7
7
CN300
CN300
CN300
CN300
LDR
LDR
EPR
EPR
LDT
LDT
REF
REF
REF
EPT
EPT
REF
FIN
FIN
FIN
FIN
DT
DT
DT
DT
CP
CP
CP
CP
5C
5C
5C
5C
C325
C325
C306
C306
C325
C325
C306
C306
Q302 R321
Q302 R321
C322 C322 C322 C322
R300
R300
R319
Q302
R319
R319
Q302
R319
R300
R300
R321
R301
R302
R303
R304
R304
R303
R302
R301
R301
R302
R303
R304
R304
R303
R302
C321
C321
C321
C321
C305 C305 C305 C305
R305
R305
R305
R305
C317 C317 C317 C317
C316
C316
L302
L302
L302
L302
C304 C304 C304 C304
C310
C310
C309
C309
C309
C310
C310
C309
R311
R311 R308
R311 R308
R311 R308
C313
C313
10
10
10
10
1
1
R310
R310
R310
R310
L301
L301
L301
L301
C308 C308 C308 C308
IC300
IC300
IC300
IC300
C312 C312 C312 C312
R308
L300
L300
L300
L300
20
20
20
20
11
11
11
11
C307 C307 C307 C307
6
R306 R306 R306 R306
R312 R309 R309 R312 R312 R309 R309 R312
R314 R318 R318 R314 R314 R318 R318 R314
C315
C315
C315
C315
R313 Q301
R313 Q301
R313 Q301
R313 Q301
Q300
Q300
Q300
Q300
+ C318 C318 + + C318 C318 +
R320
R320
R320
R320
C323 C323 C323 C323
R317 + C320 C320 + R317 R317 + C320 C320 + R317
+ C324 C324 + + C324 C324 +
R316 R316 R316 R316
7
J72-0751-02 B/2 J72-0751-02 B/2 J72-0752-02 B/2 J72-0752-02 B/2
56
Component side Foil side Component side Foil side
A B C D E F G H I J
CN601
11
1
VR601
GND
GND
MIG
MIC
PTT
VLI
5M
NC
NC
HK
SB
2
C603 C606 D506 D507
C602
S507
Q519
Q524
CP502 CP504
61
61
43
43
Q518
Q523
D603
34
34
1 6
1 6
D602
D601
Q516
Q522
61
61
43
43
Q521
Q517
R605
34
1 6
34
1 6
CP501 CP503
MAIN DC BACKUP
R601 GRN RED
3 D505
C605
NC
C520
HOOK
C519
R520
R519
MIC 1 16 1 16
Q511
Q510
D511
D510
D514
D513
MIG J601
R604
C607
Q525
GND R543
8 9 8 9
DG
S
SB R517 R606
R544
NC 6 1
43
Q506
R541
34 Q507
R540
R539
R536
R535
R542
16
D512
RED
GRN Q504 R538
D503 D504
GRN RED
R534 R537
R516
TX BUSY
8
4
IC502
+ D508
C523
C522
C521
O
G
I
16
11
IC507
+ C524
9
C525
Q508
VLI
IC506
MIC
5C
K5
K3
HK/RXD
SOE PTT/TXD
CLK
PSW
NC
SB
G
O
20
2
I
D509
R524
5M
C511
C513
R523
GND
R532
C514
R531
R530
MIG
DAT
VLI
R522 SB SB
R521
K4
K2
K1
C512
19
CN501
S504 C508 C518
1
D502 NC S506
R502
C515
C506
C504
R514
R510
9
16
Q502
S501 PTT
IC503
R505
+ C502
R503
C509
C510
43 Q514
C501 +
5 Q513 5 4 MIC
8
16
R509
Q512
R508
VR501 HK
R506
16 34
D501
34 C507 Q501 1 Component side
Foil side
DTA144EUA 2SC4226 2SB1132 DTA114EUA LA4422 NJM4558E DAN235K TA78L05F DA204U MA742
DTC363EK 2SC4617 2SC3357 DTC114EUA HSM88AS
DTD114EK 3SC5110 DTC144EUA
DTD123EK
6
2SA1586
VREF
2SC3356 GND
VIN
2SC4116
57
A B C D E F G H I J
11
1
VR601
GND
GND
MIG
MIC
PTT
5M
VLI
NC
NC
HK
SB
2
D507 D506 C606 C603
C602
S507
Q524
Q519
CP504 CP502
61
61
43
43
Q523
Q518
D603
34
34
1 6
1 6
D602
D601
Q522
Q516
61
61
43
43
Q521
Q517
R605
34
1 6
34
1 6
CP503 CP501
BACKUP MAIN DC
RED GRN R601
D505 3
C605
NC
C520
HOOK
C519
R519
R520
16 1 16 1 MIC
Q510
Q511
D513
D514
D510
D511
J601 MIG
R604
C607
IC505 IC504 PTT
Q525
R543 GND
9 8 9 8
DG
S
R606 R517 SB
R544
1 6 NC
34
Q506
R541
Q507 43
R540
R535
R536
R539
R542
61
D512
RED
R538 Q504 GRN
D504 D503
RED GRN
R534 R537
R516
BUSY TX
8
4
IC502
D508 +
C523
C522
C521
G
O
I
16
11
IC507
+ C524
9
C525
Q508
VLI
IC506
SB
NC
PSW
CLK
SOE PTT/TXD
HK/RXD
K3
K5
5C
MIC
O
G
20
2
I
D509 5M
R524
C511
C513
R523
C526 GND CN502
C517 R525 C516
NC
STB1
GND
R530
R531
C514
R532
MIG
DAT
VLI
SB R522
SB
R521
K1
K2
K4
C512
19
CN501
C518
1
C508 S504
S506 NC D502
R502
C515
S505 C505 R511 R512 R529 S503 S502
GND + C503
R526 1 8 R513
C504
C506
R510
R514
9
16
PTT Q502
IC503
R507 IC501 + R533 1 6 S501
MIG
R505
+ C502
R503
C509
C510
Q514 34
C501 +
MIC 4 5 Q513 5
8
1
61
R509
Q512
R508
HK VR501
R506
43 61
D501
Component side 1 Q501 C507 43
Foil side
60
A B C D E F G H I J K L M N O P Q R S
2
FINAL UNIT (X45-3630-XX) -10 : K,E -11 : K2 -12 : K3 Component side view
CN8 GND CN6 MAIN DC J72-0755-02 A/2
(BLACK) (RED)
ANT
C54
3
+
D7
L12
C51
C80
C89
+
CN7 BACKUP
4 J72-0755-02 B/2 C55
(ORANGE)
L11
K1
C39
C44
C57
S S
L7
C86
L6
5 CHARGE
S C42 G D
Q5
L5 G Q4 D C118
L9
C59
S
C41
C31
C32
C33
C34
D8
R22
C60
C45
C58
R18
6 S S
C83
R61
R24
R17
R53
C81
C61
C35 C46
R40 R37 R33 R43
R15
R52
D9
4 3
R23
R19
D51
D4
IC1
6 1
7
CN51
CN52
C23
R36
R38
C71
C22
C107
C109
C108
C106
C21
FWD
L14
R20
R21
8 L15 R49
D52
R60
C120 TH1
C30 C29
C20
C25
CN4
C26
R57
C24
C28
R58
C27
Q8
FAG 2 D R11 5 4
IC3
+
S R12
D2
8 1
FAB 1 G
9 R13 R41
VR1
R62 CN2
R34
R35
C75
R56
R44
RX
C70
D5
C13
C17
C14
R47
C12
C69
C5
R9
C4
R4
C6
C7
R3
R2
CN1 L8
B
B
E
L3 R1
GND
RSW
8T
PC
FAS
PDT
BAT
VTH
C72
R46
TX IN
R48
L2
R8
C1
R45
1
3
CN5 C8 L1 CN3
Q2 REV
1
10
Q1
Ref No. Address Ref No. Address Ref No. Address Ref No. Address Component side
IC1 7J Q3 9F D2 9J D8 6E Pattern 1
11
IC3 9J Q4 5I D4 7Q D9 7E Pattern 2
Q1 10H Q5 5M D5 9R D51 7B Pattern 3
Q2 10G Q8 9K D7 3K D52 8B Pattern 4
Foil side
12
13
61 62
14
A B C D E F G H I J K L M N O P Q R S
2
FINAL UNIT (X45-3630-XX) -10 : K,E -11 : K2 -12 : K3 Foil side view
J72-0755-02 A/2
C53
C52
3
C115
C114
C50
C79
C78
C77
C49
C117
C116
J72-0755-02 B/2 4
GND
BLK
C105
R54
6
C65
7
S
D
G Q7
C64
D3
C66
C67
8
C68
R50
C98
C16
Q9
C18
C104
C15
C100
D10
C19
R6
C99
C101 9
IC2
I GND
C10
C9
R7
G BLK
C113
C112
O +B2 +B1
C97
C96
C95
C94
C93
C92
C91
ORG RED
+ C103
C102 10
12
13
63 64
14
A B C D E F G H I J K L M N O P Q R S
2
FINAL UNIT (X45-3630-XX) -10 : K,E -11 : K2 -12 : K3 Component side view + Foil side
CN8 GND CN6 MAIN DC J72-0755-02 A/2
(BLACK) (RED)
ANT
C54
C53
C52
3
+
C115
D7
L12
C114
C51
C79
C50
C77
C78
C49
C80
C89
+
C117
CN7 BACKUP
C116
4 J72-0755-02 B/2 C55
GND (ORANGE)
L11
BLK
+B1 K1
RED C39
C44
C57
S S
L7
GND +B2 C86
BLK RED
L6
5 CHARGE
S
R54
C42 G Q5 D
C105 L5 G Q4 D C118
L9
C59
S
C41
C31
C32
C33
C34
D8
R22
C60
C45
C58
R18
6 S S
C83
R61
R24
R17
R53
C81
C61
C35 C46
R40 R37 R33 R43
R15
R52
D9
4 3
R23
R19
D51
D4
IC1
6 1
7
CN51
CN52
C65
C23
R36
R38
C71
S
D
C22 G
C64
D3
C107
C109
C108
C106
C21
C66
FWD C67
L14
R20
R21
8
C68
L15 R49
C98 R50
D52
R60
C120 TH1
C30 C29
C20
C25
+
C18 C26
Q9
CN4 R57
C24
D10
C100
C28
R58
C27
Q8
D
C104
S R12 C15 R6
D2
8 1
FAB C99
1 G
9 R13 R41
VR1
C101 R62 CN2
R9 C10
R34
R35
C75
R56
R47 R7
IC2
C113
R44
RX
C112
GND I
C70
D5
C13
C17
C9 C14
C12
C69
C5
C4
R4
C6
C7
R3
R2
C91
C92
C93
C94
C95
C96
C97
BLK G
CN1 L8
B
B
+B1
E
+B2 O L3 R1
GND
RSW
8T
PC
FAS
PDT
BAT
VTH
C72
R46
RED TX IN
ORG
R48
L2
R8
C1
C103 + R45
1
3
CN5 C8 L1 CN3
Q2 REV
1
10
Q1
C102
Ref No. Address Ref No. Address Ref No. Address Component side
IC1 7J Q5 5M D5 9R Pattern 1
11
IC2 9E Q7 7R D7 3K Pattern 2
IC3 9J Q8 9K D8 6E Pattern 3
Q1 10H Q9 9E D9 7E Pattern 4
Q2 10G D2 9J D10 9E Foil side
12 Q3 9F D3 7R D51 7B
Connect 1 and 4
Q4 5I D4 7Q D52 8B
13
65 66
14
A B C D E F G H I J K L M N O P Q R S
TX-RX UNIT (X57-6270-XX) (A/2) -10 : K,E -11 : K2 -12 : K3 Component side view
J72-0758-11 A/2 2
CN16
8
CN19
RSW
GND
VTM
BUP
PDT
FAS
PC
8T
3
GND2
C125
L2 L4 L5 VO
+
GND1 4
CN18
TP102 STT FIN
TX CV
8CL 5C
A2 : TX VCO (X58-481)
CV LDT
C137
+ 9CL EPT
CN1 5
MO DP
CP
REF
C139
B
B
B
2
1
2
1
+
X1
CN4 CN2
3
R45 6
R50
C53
C14 R32
L16
R31
CN15
L33
C60 C15 R30
C213
C51
L20
NARROW
DP
CP
LD
C58
C59
FC
EP
R54
1 20
R41
L19
L15
C64
IC9 C37
A1
R61
R46
C67
C216 or R170
D1
10 11 C66 XF1 7
CF1 CF2 R62 R60 D2 A9
or R65
R11
Q26 R57
R70
R10
C214
C196
R196
C74
R13
XF2
L18
L14
C48 A10
L24 GND2
R44 WIDE 8
PSW
L17
VO
C124
FCR GND1
CN3
+ SRR FIN
FCT TP101 9
8CR RX CV 8CL 5C
SRR STT SOE 5CR
A3 : RX VCO (X58-480)
LD2 CV LDR
K1 +
C136 9CL EPR
C76
TX
Q4
R69
CK STB4 + NC DP
DT 9V
R140
R138
R142
Q16
+ CP 10
F1 +
C158
C161
C160
G
O
IC5 REF
I
C159
C147
C144
Q17
C138
B
C
E
R128
DET
GND
RSSI
DP
EPR
LDR
DT
STB4
LD2
PSW
SOE
MB
GND
NC
SB
SB
NC
8C
8CR
36
2
+
CN4
R129
TEMP
FWD
GND
GND
ASQ
BUP
G
LDT
EPT
IC4
MO
35
NC
NC
NC
NC
CK
SB
SB
CP
8C
1
O 11
SB IC10
DP
LD
CP
R141
R137
EP
R139
G
C174
MO I O
C171
C173
C172
I +
12
Ref No. Address Ref No. Address Ref No. Address Ref No. Address Component side
IC4 11A IC10 11I Q17 10J D2 7E Pattern 1
IC5 10I Q4 10E Q26 8E Pattern 2
IC9 7D Q16 10K D1 7I Pattern 3
13
Pattern 4
Foil side
67 68
14
A B C D E F G H I J K L M N O P Q R S
R133
R5
L40
L38
L35
L36
L37
L39
Q20 C4
R134
R136 R135
Q1 E
R95
Q11
C215
C164
C204
C205
C206
C207
C208
R3
C94 C
3
C166
R144
C101
R143
L28
C211 or B L6
R168
C191
C192
C193
C194
C195
R173
Q23
GND2 R179 or L45 C3
L1
R106 R1
C210 or
R148 C127 + R2
C10
R172
C7 L3
D9
C224
R101
R109
R96
C96
C99
VO D8 R17
C2
C129 R121 C209 or
C8
L42
L34
C1
C5
R174
C28
C120
4 R82 5 4
C199
R18
R20 R17
FIN R122
+ C25
R79
8 1 + C24 C86
+
LDT R151 R87
Q18
C179
+ C85
C150
C152
B
C
E
EPT R152 R78
5
C13
DP Q15
R9
R8
R153 Q19
R130
C133
CP R154 R131
R90
C135
IC11
C87
REF X3 R125 C141
C115
C114
C143
R127
C89
+
C178
C175
C176
R74 C82
C80
C177
O
G
I
L31 + +
6
C212
R34 L23 C61
C41 C198
R47
C31
C57
R43
C30 R33
C56
R52 C55
Q3
R51 C65 +
C45
C47
C50
L10
L12
R48
L11
C42
R53
C69
C39
Q2
C54
R49
R14
D3
C70
R178 C52
7 C33
R36
R83
R160
L44
C32
B
C
E
C197
L21
C95 C100 L30 L29 R35 R40
R37
Q10
R92 R91 Q9 C34 R39 R150
R97 R102 B R114
C38
R162 C91 Q8 R38
C43
R163
R164
R98 C
C111
C109
C107
R103
C92
C46
C49
E
C44
C97 C102 L13
R161
R94
D4
8 GND2 R100 R107 R113 C40
C93 L25 C36
R55
R56
C98 L26 C104 L27 C105 R42
VO R93
R99 C106 R105
C63
C62
C126 +
C68
R58
C128 R120 C163
FIN C122 Q12
9 C121
16
9
8
Q25
D12
5C R123
Q24
IC6
IC7
C88
LDR R155 C130
Q5
C162
R88
Q6
16
D7
R165
R166
R76 R73
8
1
EPR R156 5 4
R77
D11
CP R158 C84 8 1 C132
X2 C134 C73
IC3
REF
C184
C190
C117
C116
C90
R75 C83
C146
C145
R67 Q7
TH1
O
G
C148
C149
+ C218
I
L32 C75
+ R177 C77 R64
+
C189
R71
R72
C78 L43
C79
11
C151
C153
R176 R68
D5
D13
C185
C71
C72 +
C157
C156
12
Ref No. Address Ref No. Address Ref No. Address Ref No. Address Ref No. Address Ref No. Address Ref No. Address Component side
IC1 4C IC11 6E Q6 9N Q11 3C Q18 5E Q25 9R D8 3D Pattern 1
IC2 10E Q1 3N Q7 11P Q12 9G Q19 5F D3 7R D9 3P Pattern 2
IC3 10E Q2 7K Q8 8C Q13 4G Q20 2F D4 8R D11 10N Pattern 3
13
IC6 9K Q3 7O Q9 8D Q14 10G Q23 3E D5 11O D12 9R Pattern 4
IC7 9L Q5 9N Q10 8E Q15 5G Q24 9S D7 9S D13 11O Foil side
69 70
14
A B C D E F G H I J K L M N O P Q R S
TX-RX UNIT (X57-6270-XX) (A/2) -10 : K,E -11 : K2 -12 : K3 Component side view + Foil side
J72-0758-11 A/2 2
L41 CN16
GNDR133 1
VTML35 8
CN19
FASL38
PDTL37
BUPL36
PC L39
R5
L40
Q20
RSW
C4
R134
C215
8T
R135 R136
E Q1
R95
Q11
C164
C208
C207
C206
C205
C204
R3
C C94 3
C166
R144
C101
R143
L6 B
L28
C211 or R173 R168
C195
C194
C193
C192
C191
Q23
C3 R179GND2
L1
R1 R106
R2 + C127 R148
C10
L3 C7 or L45
D9
L2 L4 L5
R109
R101
C224
C209 or
C125
C99
C96
R96
R17 D8 VO
C2
R171 R121 C129
C8
L42
+ C167 C29
C123
L34
C1
C5
R174
C28
C199 Q13 C120 GND1 4
CN18 4 5 R82
R19 R18
R20 R17
R122 TP102 STT C25 + FIN
C210 or
IC1
R79
TX CV
R172
C131 C223
C86 8CL C24 + 1 8 5C
+
R87 CV R151 LDT
C179
Q18
C85 +
C150
C137 A2 : TX VCO
C152
C
B
E
+ 9CL (X58-481) R78
R152 EPT
CN1 5
C13
R8
R9
MO Q19 R130
R153 DP
C133 Q15
R131 R154 CP
R90
C135
IC11
C87
C141 R125 X3 REF
C114
C115
R127
C143
C89
+
B
B
B
C178
C176
C175
R74 C82
C80
2
1
2
1
+
C177
G
O
I
X1
R45 6
R50
C53
L16
R31
CN15
C212
L23 R34
C57
L33
C198 C60 C15 R30
Q3 C213
C51 C41
C45
L20
C61 NARROW
R47
DP
CP
LD
C58
C59
FC
EP
R54 C31
1 20 R43
C30 R33
C56
C55
+ C65 R51
D3
C50
C47
R41
L19
L15
L10
R61 C54
C64
C67 R49
L12
R48
L11
C42
IC9 C37
R53
C69
C39
R52
Q2
R46
R14
R83
C52
R36
C66 D2
L44
C
B
E
A9
R70 L21
C216
R170
R65
R37
R63 R11 Q10
C217
R57
R59
R10
R150 Q9
C214
C38
R38 R13 C91 R162
C43
R164
R163
C R98
C107
C109
C111
XF2 R103
L18
L14
Q26
C92
C46
C49
R56
R93 VO
R42 R105 C106 R99
C62
C63
D4
+ C126
C68
R58
C124
FCR GND1
C163 R120 C128
CN3
+ C122 SRR FIN
Q12 C121 TP101 9
16
9
8
RX CV 8CL
Q25
D12
IC6
A3 : RX VCO (X58-480)
IC7
8CR C88
LD2 C130 CV R155 LDR
+
Q4 Q5
C162
R88
Q6
K1
D7
16
R166
R165
R76 R73
9
8
1
C136 9CL EPR
C76
TX 4 5 R156
R69
CK STB4
+
R77
C155 NC IC2 R157 DP
DT 9V C142
R140
R138
R142
+ C154
Q16
10
D11
C158
X2
C161
C160
IC3
G
O
IC5
DT C184
REF
I
C159
C190
C116
C117
C90
C147
R75 C83
C140 R124 R126
C144
R66
Q17
B
C
E
C81
C146
R128
C145
Q7 R67 C218
DET
GND
RSSI
DP
EPR
LDR
STB4
LD2
PSW
SOE
MB
GND
NC
SB
SB
NC
8C
36
NC TH1
2
G
O
C149
C148
+
I
8CR C75 L32
CN4
R129 +
TEMP
C77 R177
FWD
GND
GND
C138
ASQ
R64
BUP
G
LDT
EPT
IC4
MO
35
+
NC
NC
NC
CK
SB
SB
CP
8C
1
L43 C78
C79
11
C151
O
C153
C189
R71
D13
D5
C185
DP
LD
CP
R141
R137
EP
R139
G
C71
SB + C72
C174
MO I O
C156
C157
C171
C173
C172
I +
12
Ref No. Address Ref No. Address Ref No. Address Ref No. Address Ref No. Address Ref No. Address Ref No. Address Ref No. Address Ref No. Address Component side
IC1 4Q IC6 9I Q1 3F Q6 9F Q11 3Q Q16 10K Q23 3O D2 7E D8 3P Pattern 1
IC2 10O IC7 9H Q2 7I Q7 11D Q12 9M Q17 10J Q24 9A D3 7B D9 3D Pattern 2
IC3 10O IC9 7D Q3 7E Q8 8Q Q13 4M Q18 5O Q25 9B D4 8B D11 10F Pattern 3
13
IC4 11A IC10 11I Q4 10E Q9 8P Q14 10M Q19 5O Q26 8E D5 11E D12 9B Pattern 4
IC5 10I IC11 6O Q5 9F Q10 8O Q15 5M Q20 2N D1 7I D7 9A D13 11E Foil side
71 Connect 1 and 4 72
14
A B C D E F G H I J K L M N O P Q R S
2
TX-RX UNIT (X57-6270-XX) (B/2) -10 : K,E -11 : K2 -12 : K3 Component side view
1
MIC
5C
K5
K3
HK/RXD1
SOE PTT/TXD1
CLK
PSW
NC
SB
C806
IC628
C800
C780
ANI
20
2
+ +
O
G
CN600
R781
I
3
IC625
C786
IC627 8C
STB1
GND
19
MIG
DAT
1
IC630
VLI
I
C770
SB
K4
K2
K1
C825
C769
IC624
C781
R609
R612
G I C817 C789
C767
G
O
C766
D626
I
I
O + L606 + G + +
C600
R607
R611
R613
R601
O IC629
R604
R605
L607
CP600
+ C826
4 SB
3.3D C801 +
C785
CP601
D600 C795
L601
C798
L604 +
C814
SB
SB
GND
GND
C613 +
C623
R654 DEO
4
5 R603
DEI CN603 10
C811
D629
GND
D614 D618 +
C642
VDD
R784
R788
C805
OUT 1 16
IC601 C803
R653
L613
L612
R789
L608
R785
6 IC605
C818
C819
C820
C807
C804
C802
C799
C796
C794
AO5
AO4
AO3
SPO
SPO
AO2
AO1
SPI
RSI
RD
SPG
SPG
1
TXI
NC
NC
NC
TXD2 EMON
EPTT
SC
NC
TXG
IO1
IO2
IO3
IO4
IO5
IO6
NC
12
8 9
1
TXO CN604
30
2
R742
RXI 1 16
CN606
+
C644
AC D621
C645
7 IC602
D625
R793
R800
L611
L610
L609
RXD2
BC1
SPM
29
RXG
R792
1
AI1
AI2
AI3
BC2
DG
NC
NC
NC
RD
RA
TD
TA
8 9 C702 +
CN601
BC3
C808
R797
C810
C813
R801
BC4 C792
C788
R764
R765
C790
C816
C812
C809
C649
PTI D624
R796 R750
CLRC C657 R674
9 8 R756 R770
RXO
C760 R675
C774
C772
C827
R751
R771
R768
R766
R760
R752
R749
8 PTO + C823
IC623 CN605
5C
6
+ +
IC607
GND 16 1
C762
SPO
SPG
14 C663 +
4
+ +
C765
R658
R657
R655
+ C646 R755 R769 R812
C773
C828
C691 R676 R669 R671
9 C681 + C652 R672
J72-0758-11 B/2
Ref No. Address Ref No. Address Ref No. Address Ref No. Address Component side
10 IC601 5B IC624 3G IC630 4N D624 7M Pattern 1
IC602 7L IC625 3K D600 4B D625 7N Pattern 2
IC605 6L IC627 3B D614 6M D626 4N Pattern 3
IC607 8P IC628 3G D618 6N D629 6O Pattern 4
IC623 8L IC629 4S D621 7M Foil side
11
12
13
73 74
14
A B C D E F G H I J K L M N O P Q R S
2
TX-RX UNIT (X57-6270-XX) (B/2) -10 : K,E -11 : K2 -12 : K3 Foil side view
CN602 Q602 Q601
35 DET NC 36
R763
8C 2
S
D
DG
SB
SB
NC
GND
MO
GND
TEMP
BUP
FWD
CK
LDT
EPT
CP
NC
ASQ
NC
C784
Q610
STB4
GND
PSW
RSSI
GND
SOE
LDR
EPR
LD2
C793
C797
MB
3
NC
NC
SB
SB
DT
DP
1 8C
C787
S
R758
R774
R633
R814
R608
R610
R615
R616 5 4
C605
C602
R754 X600
R606
IC600
CP602
Q606 13 12
C778 R762 C783
CP603
D627
R622
R621
R620
R634
Q611 Q609 C791 8 1 C635 C634 C629 4
D628 R811 Q603
+
CP605 CP604
C731 C741
R753
C616 R629 S
R767 C717 IC606 DG Q600
R700 R702
C732 C742 R640
C745
IC622
R627
C638
R626
R625
R624
R623
R619
C718
R744
R815
4 3
51
R726
+ C733
R706
R720
R723
R724
C713 + + 24 1 L603 C614
R745 C764
C647 R668 C684 R644 R635
Q605
CP606
R638
R747 R673 + C643 R683 25 1 C641 5
IC608 26 100
CP607
IC610 R614
R728 R741
R729 R740
C743 R739
4 3 C746 + 36 1 C749
R743
4 3 4 3 R691 + C640
51 37 144 C750 R630
C648
C685
CP609
IC621 5 1 5 1 R692
R678
R738
C740
CP608
R732 R736 R631
R737 C739
+ C754
L602
D608
D619
D615
D611
R693
R697
D623 R670 R680 R636 R639
1 8 + R813
C747
CP610
IC604
R735
R637
R782
R786
R790
R809
R807
R805
R641
C662
C759 6
C693
4 5
D612
D610
R775 R776 R783 R787 R791 R810 R808 R806 C736 IC619 C639 C782 R695 C707 R643 R647
+ + + + C757
CP611
D620 R778 + + + + IC626 D601 C695 R645 R648
G IC618
D622
D606
D607
D609
C697
C698
R780 +
C744
C701
C699
R777
C720 I
+
R689 C708 + C753 R646 R649
50 76
C694
O R694 C696 R667 R650 51 75 R661
R779
R772
R794
R798
R803
C771
D616
CP612
C703 C752 R651
R690 C768 R696
R773 C748 R662 7
1 24 C706 + R665
R804
R663
1 16 C709 + + C756
R666
R664
R652
IC612 CP619 CP617 CP615
C777
C775
C779
C776
R659
C710
D617 C715 IC614 15 C711 72 109 C755 R688 R656
IC615 C700 + CP613
C822
R721
+ + + + C705 34 73 108
R715 C723 8 9 C751 R687
C758
C704
R730 C824 CP618 CP616
C721
R709
8
1
12 13 R708
C730
IC613
8
R714 C727
R701
R705
R704
R727
IC620
+ C680 C714 +
8
+ Q604 13 12 1 32
IC617
R707 C728
D613 R731 S
C729 +
16
GD
16
C712
9
5 4 1 8 C719
C679
C670
R686 R685
C690 R684
R717
C726
R699
R703
R734
C738
C737
R681
1
X601
L600
C716 IC609
+ IC611 + IC616
L605
C763 R718 C734
R682
R722
C725
R719 R713 8 1 4 5
C761 C692 R710 C724 R733 24 1 16 17 9
C821 + C722 R679
J72-0758-11 B/2
Ref No. Address Ref No. Address Ref No. Address Ref No. Address Ref No. Address Ref No. Address Ref No. Address Component side
Pattern 1 10
IC600 4O IC611 9E IC618 6L Q601 3J Q610 3D D610 6B D619 6C
IC603 9M IC612 7I IC619 6E Q602 3J Q611 4C D611 6D D620 6A Pattern 2
IC604 6P IC613 8I IC620 8A Q603 4K D601 6I D612 6A D622 7B Pattern 3
IC606 4M IC614 7G IC621 5B Q604 8L D606 7B D613 8B D623 6A Pattern 4
IC608 5G IC615 7E IC622 4B Q605 5B D607 7C D615 6C D627 4G Foil side
11
IC609 9P IC616 9G IC626 7H Q606 4B D608 6B D616 7A D628 4C
IC610 5H IC617 8D Q600 4Q Q609 4D D609 7C D617 8B
12
13
75 76
14
A B C D E F G H I J K L M N O P Q R S
2
TX-RX UNIT (X57-6270-XX) (B/2) -10 : K,E -11 : K2 -12 : K3 Component side view + Foil side
Q601 Q602 1
CN602
NC 36
R763
8C 2
S
D
MIC
5C
K5
K3
HK/RXD1
SOE PTT/TXD1
CLK
PSW
NC
SB
C806 GD
IC628
NC
ASQ
NC
CP
EPT
LDT
CK
FWD
BUP
TEMP
GND
MO
GND
NC
SB
SB
C800
C780
ANI
20
2
+ + C784
O
G
CN600
R781
Q610
GND
RSSI
PSW
GND
STB4
C797
SOE
35 DET
LDR
EPR
LD2
C793
MB
3
NC
NC
IC625
DP
DT
SB
SB
1 8C
C787
C786
IC627 8C
R610
STB1
GND
19
MIG
DAT
G
S
IC630
VLI
I
C770
SB
K4
K2
K1
C825
R774
R758
C769
IC624
C781
R609
R612
CP602
R814
R633
R608
G I C817 C789
C767
R615
O
C766
D626
4 5 R616
C602
O X600 + L606 + G + + R754
C600
R607
R611
R613
R601
R606 O IC629
IC600 Q606
12 13
C605
C783 R762
C778
R604
R605
CP603
L607
CP600
+ C826 D627
R634
R620
R621
R622
4 C629 C634 C635 1 8 SB C791 Q609 Q611
Q603 R811 C801 +
D628
3.3D +
CP604
C741 C731
R753
C785 S R629 C616
Q600 GD IC606 C717 R767
R700 R702
CP601
R640 C742 C732
C745
IC622
D600 R627 C795
C638
R619
R623
R624
R625
R626
L601 C718
R815
R744
51
4 3
R618 R602 R600
R628 R642 R802 C815 C798
R726
C733 +
R724
R723
R720
R706
+
CP605
SB
SB
GND
GND
C613 R635 R644 R668 C647 +
C623
CP606
R638
4
5 R603 1 25 R683 R673
C641 DEI C643 + CN603 R747 10
100 26
CP607
R614 C811
R739
R729 R740
R728 R741
C749 1 36 + C746
D629
3 4
R743
R738
GND
C640 + R691 IC610 3 4 IC608
3 4
+ IC621
R630 C750 144 37 D614 D618 15
C685
C642
CP609
VDD R692 1 5 1 5
R678
R784
R788
C805
CP608
C740
R631 1 16
R732 R736
R737 C739
C754 +
L602
D611
D615
D619
D608
OUT
R693
R697
C648
R636 R680 R670 D623
IC601 R639 D610 D612
C743
C747
R813
R653 + C803 8 1
R735
CP610
IC604
L613
L612
R789
L608
R637
R805
R807
C820R809
R790
R786
R782
R641
C662
R785
6 C759
C693
IC605 5 4
C818
C819
C807
C804
C802
C799
C796
C794
R647 R643 C707 R695 C782 C639 IC619 C736 R806 R808 R776 R775
C757 +
AO5
AO4
AO3
SPO
SPO
AO2
AO1
SPI
C720 RSI
RD
SPG
C699 SPG
+ 1 + +
CP611
R648 R645 C695 D601 IC626 + + + + R810 R791 R 787 R783 R780 R778 D620
IC618 G
C698
C697
+ TXI
D609 NC
NC
NC
EMON
EPTT
SC
NC
R798 TXG
IO1
IO2
IO3
IO4
IO5
IO6
R772 NC
12
8 9
C701
C744
1
R649 R646 C708 R689 I
76 50 C753 + CN604
30
TXO +
R7792
R777
C694
R661 75 51 R650 R667 C696 R694 O
R803
R794
R742
1 16
CN606
RXI
C771
D616
+
CP612
D607
TAD606
D622
C645
R793
R800
L611
L610
L609
D625
R665 +
R698 BC1
R804
R799 R795
29
IC602
RXD2
R792
C790 TXD2
CP614
C779 1
SPM
C776 RXG
R660
R663
BC2 16 1
C816 AI1
C812 AI2
C809 AI3
DG
C706
NC
NC
NC
RD
RA
+
TD
C756 + C709 8 9 C702 +
R652
R664
R666
C775
C777
R659
C808
R797
C810
C813
C710
IC614
C758
72 C711
R801
R656 R688 C755 109 51 BC4 + C700 D617 C792
C788
R764
R765
CP613 D624 IC615 C649
R687 C751
108 73 43 PTI R796
C705 C723 + + + +
9 8 C657 R674 R750
CN601
CP616 CP618 CLRC 9 8 R756 R770 R715
IC617 R721
C822
C824 R730
C721
C704
4 C7605 R675
C774
RXO R709
C772
C827
R751
R771
R768
R766
R760
R752
R749
8 +12C823
8
CN605 13
R708
C730
PTO IC623
IC613
8
R727 C727
R704
R705
R701
IC620
+ C714 C680 +
8
32 1 12 13 Q604 5C + C728 R707
6
+ + D613
IC607
R731 R714
S GND 16 1
C762
+ C729
16
DG
16
C712
9
C719 R712 8 1 4 5C663 +
SPO
SPG
C679
C670
C737
C738
R734
R703
R699
C726
R717
C690 R684
R686 R685
R681
1
14
4
C735 IC616 + +
C765
C725 R658
R657
R655
IC603
X601
L600
IC609 C716
+ C646 R755 R769 IC611 R812
C773
C828
+ +
L605
C734 R713 C763
R722
R682
R718
C691 5 4 1 8 R676 R669 R671 R719
1 24 R733 C724 R710 C761
9 17 16 +
C681 R679 C692 C652 R672
C722 + C821 J72-0758-11 B/2
Ref No. Address Ref No. Address Ref No. Address Ref No. Address Ref No. Address Ref No. Address Ref No. Address Ref No. Address Ref No. Address Ref No. Address Component side
10 IC600 4E IC607 8P IC614 7M IC621 5R IC628 3G Q604 8H D601 6K D612 6S D619 6Q D626 4N Pattern 1
IC601 5B IC608 5M IC615 7O IC622 4R IC629 4S Q605 5R D606 7R D613 8R D620 6S D627 4M Pattern 2
IC602 7L IC609 9D IC616 9M IC623 8L IC630 4N Q606 4R D607 7Q D614 6M D621 7M D628 4Q Pattern 3
IC603 9G IC610 5L IC617 8P IC624 3G Q600 4C Q609 4P D608 6R D615 6Q D622 7R D629 6O Pattern 4
IC604 6D IC611 9O IC618 6H IC625 3K Q601 3J Q610 3P D609 7Q D616 7S D623 6S Foil side
11
IC605 6L IC612 7K IC619 6O IC626 6M Q602 3J Q611 4Q D610 6R D617 8R D624 7M
Connect 1 and 4
IC606 4G IC613 8K IC620 8S IC627 3B Q603 4I D600 4B D611 6P D618 6N D625 7N
12
13
77 78
14
A B C D E F G H I J K L M N O P Q R S T
82
A B C D E F G H I J K L M N O P Q R S T
TKR-850 CIRCUIT DIAGRAM Note : Components marked with a dot (·) are parts of pattern 1.
83
A B C D E F G H I J K L M N O P Q R S T
90
TKR-850 TKR-850 TKR-850
BLOCK DIAGRAM
91
TKR-850
KES-4 (EXTERNAL SPEAKER)
KES-4
UP
CK
BA
Jumper lead
Connector
15 13
12 1
6 Speaker cable
Black lead
3
Crimp terminal
(E23-0613-05) Black/White lead
Specifications
Speaker size ........................................... 120mm
Maximum input power .......................... 20W
Impedance ............................................. 4Ω
Frequency response .............................. 100 to 5000Hz
Dimensions (W x H x D) ........................ 127 x 127 x 65 mm
projection not included 5 x 5 x 2-9/16 inch
Weight ................................................... 780g / 1.72 lbs
94
TKR-850
SPECIFICATIONS (K,K2,K3 TYPE)
GENERAL
Frequency Range ................................ K : 450 to 480MHz K2 : 480 to 512MHz K3 : 400 to 430MHz
Number of Channels ........................... 16 channel
Channel Spacing ................................. Wide : 25kHz Narrow : 12.5kHz
(PLL channel stepping 5kHz/6.25kHz)
Operating Voltage ............................... 13.6V DC± 15%
Current Drain
Standby .......................................... 0.8A
Standby w/power save .................. 0.3A (Operating mode DC-IN : Backup, FAN : Temp, SAVE : ON, DISP : OFF)
Receive .......................................... 1.2A
Transmit/Receive ........................... Less than 13A
Duty Cycle
Receive .......................................... 100%
Transmit ......................................... 100% (100% @25W)
Frequency Stability ............................. Less than ± 0.00015% –30°C to +60°C (–22°F to +140°F)
Antenna Impedance ........................... 50Ω
Operating Temperature Range ........... –30°C to +60°C (–22°F to +140°F)
Dimensions ......................................... 483 (19) W x 88 (3-1/2) H x 340 (13-1/3) D mm (inch)
Weight ................................................ 9.7kg (21.4 lbs.)
95
TKR-850
SPECIFICATIONS (E TYPE)
GENERAL
Frequency Range ........................................ 440 to 470MHz
Number of Channels .................................. 16 channel
Channel Spacing ......................................... Wide : 25kHz Narrow : 12.5kHz (PLL channel stepping 5kHz/6.25kHz)
Operating Voltage ....................................... 13.2V DC
Current Drain
Standby ................................................... 0.8A
Standby w/power save ........................... 0.3A (Operating mode DC-IN : Backup, FAN : Temp, SAVE : ON, DISP : OFF)
Receive ................................................... 1.2A
Transmit/Receive .................................... Less than 13A
Duty Cycle .................................................. Receive : 100% Transmit : 100% (100% @25W)
Frequency Stability ..................................... Less than ± 0.00015% –30°C to +60°C
Antenna Impedance ................................... 50Ω
Operating Temperature Range ................... –30°C to +60°C
Dimensions ................................................. 483 W x 88 H x 340 D mm
Weight ........................................................ 9.7kg
KENWOOD CORPORATION
14-6, Dogenzaka 1-chome, Shibuya-ku, Tokyo 150-8501, Japan
KENWOOD SERVICE CORPORATION
P.O. BOX 22745, 2201 East Dominguez Street, Long Beach, CA 90801-5745, U.S.A.
KENWOOD ELECTRONICS CANADA INC.
6070 Kestrel Road, Mississauga, Ontario, Canada L5T 1S8
KENWOOD ELECTRONICS DEUTSCHLAND GMBH
Rembrücker Str. 15, 63150 Heusenstamm, Germany
KENWOOD ELECTRONICS BELGIUM N.V.
Mechelsesteenweg 418 B-1930 Zaventem, Belgium
KENWOOD ELECTRONICS FRANCE S.A.
13, Boulevard Ney, 75018 Paris, France
KENWOOD ELECTRONICS U.K. LIMITED
KENWOOD House, Dwight Road, Watford, Herts., WD1 8EB United Kingdom
KENWOOD ELECTRONICS EUROPE B.V.
Amsterdamseweg 37, 1422 AC Uithoorn, The Netherlands
KENWOOD ELECTRONICS ITALIA S.p.A.
Via G. Sirtori, 7/9 20129 Milano, Italy
KENWOOD IBERICA S.A.
Bolivia, 239-08020 Barcelona, Spain
KENWOOD ELECTRONICS AUSTRALIA PTY. LTD.
(A.C.N. 001 499 074)
16 Giffnock Avenue, Centrecourt Estate, North Ryde, N.S.W. 2113 Australia
KENWOOD ELECTRONICS (HONG KONG) LTD.
Unit 3712-3724, Level 37, Tower one Metroplaza, 223 Hing Fong Road, Kwai Fong, N.T., Hong Kong
KENWOOD ELECTRONICS TECHNOLOGIES(S) PTE LTD.
Sales Marketing Division
1 Ang Mo Kio Street 63, Singapore 569110