Professional Documents
Culture Documents
Thank you for purchasing the Samsung Bluetooth Make sure you have the following items with your Charge the headset's battery fully before using 2 Plug the travel adapter into the electrical
Quick Start Guide Mono Headset WEP210. We hope you will be
delighted with its operation.
headset:
Travel Adapter, User’s Guide, Earpiece Cover
the headset for the first time.
button
button 3 Remove the travel adapter from the headset.
Get connected in 4 quick steps Earpiece
Indicator light • The headset cannot be used while charging.
• Bluetooth version: 2.0 (compatible with devices of
Charge your headset • Use only a Samsung-approved charger or adapter.
Volume Down Bluetooth version 1.1 or higher)
Put your headset in pairing mode • Supported Bluetooth Profiles:
button
Turn on Bluetooth on your phone and - Headset Profile
pair with headset - Hands-Free Profile
2 Enter a passkey or PIN, 0000 (4 zeros), then After you have successfully paired your phone
press the Yes or OK key. and headset, you do not need to repeat these
initial setup steps each time you use the
headset.
Guide No.: GH68-12949A
11/2006. Rev. 1.0
More user manuals on ManualsBase.com
Features and Turn the headset on/off Wear the headset Use the loop
Troubleshooting
Functions Guide To turn the headset on,
Press and hold the Multi-Function button for
Wear the headset on your ear.
In general, you will get better performance
You can replace the original earpiece cover with the
supplied loop earpiece cover. Depending on what ear My phone does not find my headset.
4 seconds until you see 4 blue flashes on the when there are no obstructions you are going to wear the headset, simply adjust the Make sure the blue indicator light on your
SAMSUNG indicator light, then release. (including parts of your body) loop accordingly. headset turns on when your phone is
You will hear a tone and see the indicator light between the headset searching for devices.
Bluetooth® Headset flashes while the power is on and the phone.
WEP210 (see Meaning of the indicator light of this guide). My headsest worked before but now it is
not working.
To turn the headset off, Make sure your phone is on and the Bluetooth
Press and hold the Multi-Function button for feature is turned on in your phone.
4 seconds until you see blue and red flashes on the If the Bluetooth feature has been turnned off
Important: indicator light, then release. or was turned on only temporarily, you may
You will hear series of 2 tones and see the indicator need to restart the Bluetooth feature.
Be sure to first follow the Left Right
Quick Start Guide on light stops flashing. If you have confirmed the Bluetooth feature is
the reverse side of this guide on in your phone, pair your phone and
to complete initial setup headset again.
of your headset.