Professional Documents
Culture Documents
Affected Publication: API Standard 650, Welded Steel Tanks for Oil Storage, Tenth Edition,
November 1998
ERRATA
--`,,`,,`,,,```,,`,,,,,,`,`,```-`-`,,`,,`,`,,`---
E.1, first sentence in last paragraph, change:
“…where S1 is less than or equal to 0.04 and SS… is less than or equal to 0.05 g...”
to
“…where S1 is less than or equal to 0.04 and SS… is less than or equal to 0.05g...”
E.2.1.2, change:
“characteristic earthquake: characteristic earthquake: An earthquake assessed…”
to
“…characteristic earthquake: An earthquake assessed…”
E.2.1.3, change:
“maximum considered earthquake (MCE): maximum considered earthquake (MCE): The most
severe…”
to
“maximum considered earthquake (MCE): The most severe…”
and
1
Copyright American Petroleum Institute
Provided by IHS under license with API Licensee=UAE LOCATION/5940240004
No reproduction or networking permitted without license from IHS Not for Resale, 05/28/2007 23:27:22 MDT
E.2.1.6, Page E-2, change:
“Ms Slab moment (used for pile cap and pile cap design), Nm (ft-lb)”
to
“Ms Slab moment (used for slab and pile cap design), Nm (ft-lb)”
Table E-1 and Table E-2, last row, for all cases, change:
“*”
to
“a”
E.4.6, Page E-5, item F, subitem 1, last sentence, reference should read:
“The Site Class may be determined in accordance with E.4.7…”
--`,,`,,`,,,```,,`,,,,,,`,`,```-`-`,,`,,`,`,,`---
“…determined from Tables E-1 and E-2.”
∑i =1
di
N= n
∑i =1
di
Ni
2
Copyright American Petroleum Institute
Provided by IHS under license with API Licensee=UAE LOCATION/5940240004
No reproduction or networking permitted without license from IHS Not for Resale, 05/28/2007 23:27:22 MDT
E.4.6, Page E-6, third equation should read:
ds
N ch = m
∑
i =1
di
Ni
E.4.6, Page E-6, first sentence at top of 2nd column should read:
m
where ∑d = ds
--`,,`,,`,,,```,,`,,,,,,`,`,```-`-`,,`,,`,`,,`---
i
t =1
∑i =1
di
sui
∑
a
Site Class vs N or Nch u
In US Customary units:
1 Ci H
Ti = • E
27.8 t u
D
3
Copyright American Petroleum Institute
Provided by IHS under license with API Licensee=UAE LOCATION/5940240004
No reproduction or networking permitted without license from IHS Not for Resale, 05/28/2007 23:27:22 MDT
Equation E-7, change:
“Fa”
to
“Fv”
to
⎛ 3.67 H ⎞
⎜ ⎟ −1
⎝ D ⎠
4
Copyright American Petroleum Institute
Provided by IHS under license with API Licensee=UAE LOCATION/5940240004
No reproduction or networking permitted without license from IHS Not for Resale, 05/28/2007 23:27:22 MDT
E.6.1.4, add above second equation in second column:
“In US Customary units”
E.6.2.1.1.2, Page E-13, first column, second equation (In US Customary units), delete:
“ft”
5
Copyright American Petroleum Institute
Provided by IHS under license with API Licensee=UAE LOCATION/5940240004
No reproduction or networking permitted without license from IHS Not for Resale, 05/28/2007 23:27:22 MDT
E.6.2.2.3, fourth equation (In US Customary Units), change:
“ Fc = 10& 6 ts /(2.5D) + 7.5 (GH ) < 0.5Fty ”
to
“ Fc = 10& 6 t s /(2.5 D) + 600 (GH ) < 0.5 Ft y ”
and
⎛ I ⎞
“ ⎜⎜ ⎟⎟ ”
⎝ TC ⎠
to
⎛ 1 ⎞
“ ⎜⎜ ⎟⎟ ”
⎝ TC ⎠
and
⎛ I ⎞
“ ⎜⎜ ⎟⎟ ”
⎝ TC ⎠
to
⎛ 1 ⎞
“ ⎜⎜ ⎟⎟ ”
--`,,`,,`,,,```,,`,,,,,,`,`,```-`-`,,`,,`,`,,`---
⎝ TC ⎠
6
Copyright American Petroleum Institute
Provided by IHS under license with API Licensee=UAE LOCATION/5940240004
No reproduction or networking permitted without license from IHS Not for Resale, 05/28/2007 23:27:22 MDT
Table E-7, first row of first column, change:
“SDS<0.33g”
to
“SDS ≤0.33g”
E.7.9, change:
“Using closely spaced shims…”
to
“d. Using closely spaced shims…”
V.3.1, remove:
“JEc = joint efficiency of compression ring. JEc = 1.0 for butt welded top angles and tension/compression
rings.”
--`,,`,,`,,,```,,`,,,,,,`,`,```-`-`,,`,,`,`,,`---
V.7.3.4, insert equation:
In SI Units:
X shell = 1.47 Dt al and delete X shell = 13.4 Dtsl
V.8.2.1.3, change:
“ Ns + 1 = H rs / H safe ”
to
“ Ns + 1 = Ls / H safe ”
7
Copyright American Petroleum Institute
Provided by IHS under license with API Licensee=UAE LOCATION/5940240004
No reproduction or networking permitted without license from IHS Not for Resale, 05/28/2007 23:27:22 MDT
V.8.2.1.4, change:
“Spacing = H rs / N s + 1 ” ( )
to
“Spacing = Ls / N s + 1 ” ( )
V.8.2.3, change:
“The width of bottom plate considered effective as an end stiffener shall be not more than 32tb,…”
to
“The width of bottom plate considered effective as an end stiffener shall be not more than 16tb,…”
and
V.10.1, change:
“11. Calculate the total contributing shell width acting with the intermediate stiffener:…”
to
“12. Calculate the total contributing shell width acting with the intermediate stiffener:…”
and
“12. Calculate the required moment of inertia of the intermediate stiffener region:…”
to
“13. Calculate the required moment of inertia of the intermediate stiffener region:…”
and renumber:
--`,,`,,`,,,```,,`,,,,,,`,`,```-`-`,,`,,`,`,,`---
items 13 through 15
to
items 14 through 16
8
Copyright American Petroleum Institute
Provided by IHS under license with API Licensee=UAE LOCATION/5940240004
No reproduction or networking permitted without license from IHS Not for Resale, 05/28/2007 23:27:22 MDT
V.10.2, item 13, second and third equations, change:
6 (69.1)(75 )
“ Areqd = 21, 600 ”
to
6 (69.1)(75 )
“ Areqd = 14 , 400 ”
and
and
“ Astiff = −4.9 sq. in.; the stiffener section area must be ≥ 0.72 sq. in. (= 1
2 x A reqd ) ”
to
“ Astiff = −4.2 in.2 ; the stiffener section area must be ≥ 0.72 sq. in. (= 1
2 x Areqd )”
--`,,`,,`,,,```,,`,,,,,,`,`,```-`-`,,`,,`,`,,`---
9
Copyright American Petroleum Institute
Provided by IHS under license with API Licensee=UAE LOCATION/5940240004
No reproduction or networking permitted without license from IHS Not for Resale, 05/28/2007 23:27:22 MDT