Professional Documents
Culture Documents
It is available on:
• with the references 3BA 27860 AAAE (non secured version) and 3BA 27861 AAAE (secured version).
Technical modes to change the release, new features, registered restrictions and controlled features are described in the
Release Note for Release 11.2 MD2#2, also called Release 11.2.1 (version L2.300.27.c).
Revision History
Edition 01: May 13, 2016 creation of the document
Edition 02: May 19, 2016 l2.300.27.c (MD2#2)
Legal notice:
The information presented is subject to change without notice.
ALE International assumes no responsibility for inaccuracies contained herein.
Copyright © ALE International 2016
Table of contents
1 Reference ............................................................................................................................................... 4
2 Patch L2.300.27.b/c ................................................................................................................................ 4
3 List of added features from TR ................................................................................................................. 5
Refer for TC2122 release note of R11.2 for further details about
version installation & new functionalities.
Features in PCS and features in test
This document includes all improvement and corrections since TR. However, you can consult:
TC2144 Release Note for OmniPCX Enterprise R11.2 MD1 Version L2.300.25.C
2 Patch L2.300.27.b/c
WARNING
This document applies to the OmniPCX Enterprise Release 11.2 MD2#2 in standardized version
L2.300.27.c.
Version L2.300.27.c replaces L2.300.27.b for a security reason on set 8018.
L2.300.27.c is MD2#2, the difference with MD2 is only the 8018 firmware (see Sets 8018 with
firmware 4.80.83 (R11.2 MD2))
Version L2.300.27.c is the maintenance delivery 2 (MD2#2) for Release R11.2 (also called R11.2.1)
and makes a set of corrections and enhancements available for sites already installed, new binaries
from version L2.300.25.c (R11.2 MD1). It contains several developments that were not included in the
previous TR and MD1 (see chapter 3).
The version L2.300.27.c is compatible with OpenTouch Multimedia Services OT 2.1.1 (feature :
crqms00153081) (refer to TC1782).
Note
The version L2.300.27.c has at least the same correction level as version J2.603.37 (R10.1.1 MD10),
K1.400.37 (11.0 MD5), K1.520.41 (R11.0.1), L1.301.31.a (R11.1 MD5).
The database of version L2.300.27.c is compatible with the database of versions j2.603.38 (R10.1.1
MD11), K1.400.37 (11.0 MD5), K1.520.43/44 (R11.0.1 MD8/9), L1.301.32/33.a (R11.1 MD6/7).
Warning :
From the version J2.603.38 (R10.1.1 MD11), any migration to release R11.2 must
be done in L2.300.27.b (R11.1 MD2) minimum.
From the version K1.520.42 (R11.0.1 MD7) and upper, any migration to release
R11.2 must be done in version L2.300.27.b (R11.2 MD2) minimum.
From the version L1.301.31.a (R11.1 MD5) and upper, any migration to release
R11.2 must be done in version L2.300.27.b (R11.2 MD2) minimum.
Before any migration, you should consult the document "TC1854: OmniPCX Enterprise Patch Alignment" on
the Business Portal.
Inter-Operability tested:
o OTMC R10 10.0.000.020
o OXE-OXO R10.1 OXO 10.1/37.001
o OTCT PC R2.1 R2.100.0.0.90 & OTCT PC 2.1.024.000
o 8770 R2.6.04.00.b & R3.0.11.c
o Audiocode 5.80A.059.003
o ICS/ACS ICS 6.7.400.200.e & ACS 9.1.0.7154 d
On OXE side the set will have the sip device type (NOT sip extension) meaning a lower level of services.
Here is a non exhaustive list:
Call by name via LDAP connector
Session establishment
Audio call hold
Audio call consultation hold
Audio Enquiry call / Audio Broker call
CLIP/CLIR/COLP/CLOR
Music on hold
Call waiting indication
Transfer unattended
Audio communication transfer attended
Call forwards (managed by the set) :
Call forward unconditionally
Call forward on busy
Call forward on no answer
Incoming call screening
Outgoing call screening
Local auto-answer (interphony)
DTMF (RFC 2833)
Redial
Message waiting indication
Call Log (incoming, outgoing, missed calls)
Voice mail access (TUI)
Voicemail deposit
Local Appointment Reminder
Local Programmable Keys
Local Settings
Device management from 8770
Video session with 3rd party MCU
Peer to peer video communication
Restriction
Better to use 8088 (video mode) in hub room because some telephonic features are not stable (hold feature,
voice mail for example, see table upper.
Crqms00191174: Standby CPU is not coming in service, after cloning when we enable SSH2 in spatial
redundancy setup.
A patch L2.300.27.d will be produced for this point.
Feature under the conditions written in the corresponding PCS document to read
1) OXE network: IPv6 support ABC-F links and trunk groups are compatible with IPv6.
Reference : crqms00138973
2) Crystal INTIP Hardware: IPv6 support Deployment of OXE solution built with Crystal chassis.
rystal INTIP has to support IPv6 stack. V4/v6 RTP proxy is not required.
Reference : crqms00138974
3.2.4 Sort user search in OXE integrated with external LDAP directory using first name
The implementation is a rewrite of PER 3064
The goal is to sort user search in OXE integrated with external LDAP directory using first name
Previously in LDAP sorting the received entries are sorted based only on the family name/last name.
Reference crqms00167616 PER 3064
3.2.7 Check in/out state and associated room set for guests available in management tools
General Description
The objective of this feature is to introduce a new read only parameter “Associated room/guest” under
Dynamic State User.
4 Next MD deliveries …
Next MD3 patches will contain the rest of R11.2 features & will be documented as well.
Note
The access to secured patch is only given on request after filling the appropriate document posted on
Business Portal Support > Technical Support > Software download > OmniPCX Enterprise > OmniPCX
Enterprise > Release 11.2 > Request for Security Patch Access (Ed10).
Reference of compatible CD-ROMs and DVD
REMINDER
As of Release 6.1, the software is only delivered on DVD.
CD-ROM/DVD Reference MD5 checksums (1)
OMNIPCX ENTERPRISE R11.2 DVD-R 3BA27860 AAAE faa78dc98df03029be522e927d07a43a
Version L2.300.27.c (DVD) *Image_OXER112_MD2.2_l230027c.iso
OMNIPCX ENTERPRISE R11.2 3BA27861 AAAE 12505ce9c86f71d859dcd5ddcaa141c8
SECURED DVD-R *Image_OXER112_MD2.2_sl230027c.iso
Secured Version SL2.300.27.c (DVD)
Flex Virtualized Licence Server (DVD 3BA 27784 AAAA 3242f32859079706bbd2f27de4354af6
) (DVD) vmFlex-1.2.000.003.iso (vmware plateform)
+ installer/launcher.bin (KVM) No ref. for the 732a8f236ac8cf5bd4a44c8508a1eae7
installer file (changed *flexlm_standalone-2.0.100.030-IP0004-
with MD1 patch) launcher.bin (5)
OXE IPV6-IPV4 translator DVD-R 3BA27853 ABAA c9a029dee7a3f5211760361363917513
*OST64.iso
OXE MS APPLICATION DVD-R 3BA27802ABAA 15bd3ae8214e76bd708939448d6b6c1b
Software Version 4.0 oms-4.00-IP0001.iso
BOOT DVD (OT/OXE common) 3BH12207AAAA 703da41c289c08e1100fcc298262e9a1
bootdvd.12.0.001.002.x86_64.iso bootdvd.12.0.001.002.x86_64.iso
(1) Before installing the software, we strongly advise you to check the integrity and authenticity of the
software. For detailed information about checksums, please refer to the technical communication
TC1271 Checks for integrity and authenticity of downloaded software.
(2) OmniVista 4760 is in phase out period (November 2015 for technical support). Last version
available is 5.2.03.00.c where most of the remaining existing issues are fixed
(3) This checksum concerns only the DVD containing the OmniVista 8770 software Release
R2.6.07.05.a.iso reference 3BH 11670 AGAC.
(4) That Sip DM is not usable for 8002/8012 sets in hotel environement
(5) For kvm plateform, the file is only the installer. Available only on the business portal as a
temporary solution (a new DVD will exist for MD1)
Note
PSP software (Phone Set Programming) is not delivered with L2.300.27.b and SL2.300.27.b DVD
versions.
PSP software is available on Business Portal (https://businessportal2.alcatel-lucent.com) in section
Customer Support > Technical Support > Software Download > OmniPCX Enterprise > OmniPCX
Enterprise > Phone Set Programming.
This version is compatible with OmniPCX Enterprise Release 11.2/11.2.1
6.1 Sites with the "IP Touch Security" feature: Migration from R6.2 or R7.x to
R11.2 with SSM & MSM boxes in version 3.5.01.a/4.0.0.9
CAUTION
Sites using "IP Touch Security Solution" feature (Encryption) must follow a specific procedure to update the IP
Touch security boxes.
The version 3.5.01.a is a package which contain bin_SM 3.3.0.5 and bin_SM2 3.5.0.1.
The version 4.0.09 is a package which contain bin_SM 3.3.05, bin_SM2 3.5.01 and bin_SM3 4.0.09.
Bin_SM3 4.0.09 will be used with future thales box “v5M” these boxes should be officialized in June.
8.4 L2.300.27
crqms00177273 valFuncManual [MMI] The "lock" item in "Menu" should be "unlock" if 8018 is locked
crqms00185851 customerSite display on attendant 4068during ringing is incomplete
crqms00184856 internTestManual Video SIP Trunking: "REINVITE" received in Leg2 before the
reception of ACK (REINVITE) in Leg2.
crqms00182111 alpha tool downstat : should display main and stand-by OST64 and need tool to restart
crqms00178395 valFuncManual OXE L2: Security testing: Filtering is NOK for Supervisor R/M with Supervisor
name as a filter in SNMP Supervisor configuration
crqms00177267 valFuncManual [MMI]"Jack plug" in setting menu should be deleted or hidden.
crqms00187750 internTestManual OXE L2 : Bluetooth Menu to be displayed / hidden based on Alcatel 8
& 9 Series COS parameter.
crqms00183023 valFuncManual OXE M1: PER 3011: IPTouch 8028 backlight goes OFF before timer expiry
crqms00182790 marketingActivity L2 MD2 release name to change from R11.2 to R11.2.1
crqms00184210 valFuncManual OXE_L2 : Call drop when OT user transfers a External user video call to Oxe
user.
crqms00184336 valNonRegression NRT: ALE desk phone: 8038 set type not updated properly
crqms00172640 acceptanceTest [SIP-SBD] Handle locally the RE-INVITE dedicated to Session Refresh
crqms00189104 internTestManual SIPEXTGW table got corrupted when upgrading from L1 latest
crqms00187110 marketingActivity 4068 NOE without Bluetooth
crqms00188778 externTestManual DB Translation for L2.300.27
crqms00189263 valFuncManual [OT11 sprint 12][OTC PC]: on OTCV PC in conference with an OXE user with
a NOE, when escalating the video, the comm is cut on the NOE after 15s
crqms00183694 valFuncManual OXE M1:8018: No entry for 8018 set present when edsbr tool is run
crqms00189634 alpha No more audio with IpDesktopSoftphone
8.5 L2.300.26 to L2.300.26.j (no green light, for OT2.2 beta test)
L2.300.26.j
crqms00193502 [OT11 sprint 12]: after an update of the OT server, when an OXE user with an IPTouch
receives a voice message, he is not notified (no MWI, no counter increment)
L2.300.26.i
crqms00192085 OXE L2 Alpha: No Voice call from France to Chennai
L2.300.26.h
noe3gip_4.51.92
8.8 L2.300.25.b
crqms00186297 NRT: Encryption_No voice path when OXE user makes an T2-ISDN call
8.9 L2.300.25.a
New binary
linux_patch_95.6
8.10 L2.300.25
crqms00185763 No translation on patch l2.300.25 from l2.300.15
crqms00185713 Unwanted traces during modification of SIPEXTGW
crqms00185556 DB Translation for L2.300.25
crqms00163816 OTCS - Correlator data and Global call id not ok in CSTA events in case of blind transfer to
OXE users and ISDN numbers
crqms00185641 OXE M1 : 8018 Feature - The set type of 8018 is not proper on Twin CS.
crqms00185660 PER 2186:User entity should be used with One Number Services (MAKE mgr option visible)
crqms00181866 MutliOT_OTCV_PC:Get and Push doesn't work to/from OTCV PC and 8088 with Lifesize user
crqms00184900 called number id couldn't display correctly on 8082 sets, when the oxe extensions overflow via
RSI
crqms00182021 Rapid call shift - CSTA monitoring wrong when tandem set in conversation with remote ABC-F
and ISDN users
crqms00181117 OXE_L2.300: Encryption keys displayed in traces for an incoming SIP-ISDN TLS-SRTP call on
non-secured IP set on local node1
crqms00184969 PER2747: Error in Translation of few THAI strings
crqms00182951 OXE M1: PER3011 : Help Text is not matching with external specification in the node
crqms00185345 Doorcam Application no video since upgrade to l2
crqms00184957 Drop participant during 3 party conference (OT R2.2 related) - External users
crqms00185135 PER 3011: backlight timer for premium deskphones
crqms00185169 hybrid link on B channel not OK
crqms00185112 after bascul, TS for Sig in INTOF link are lost (82/78) if remote CR is lower than principal CR
crqms00185136 8212 DECT handset support
crqms00185130 PER 3011: backlight timer for premium deskphones - CH Part
crqms00183803 AA : External call released when transferred via AA to OXE user forwarded to voicemail
crqms00184021 Early media flow is not heard when calling Remote Extension thru SIP Trunking access
8.11 L2.300.24
crqms00184623 Urgent broadcast is not working for a Mobicall//1-178917551//
crqms00184594 End of Redhat OST 64 (KVM) : OXE crashed & Suse OST64 resets while Registering 2000
IPV6 users using Ipnosis tool
crqms00182242 Bad English in error string: "To few" instead of "Too few"
crqms00177611 OXE : SIPMOTOR backtrace for INVITE-CANCEL scenario during Robustness tesing of OXE
with Codenomicon tool
crqms00183586 L2.300.17.a_IPNOSIS_IPV6_Network : GD3 reboots when using 10 RTP proxies in a network
IPv4/IPv6 call.
crqms00184513 Missed code during reporting of crqms00178342
crqms00179202 Drop participant during 3 party conference (OT R2.2 related)
crqms00184321 MutliOT_OTCV_PC:Video path fails when 8088OTCv user operates Get/Push between devices
in a SIP ISDN video call
New binaries
noeipg_4.34.00
ngp3_7.08
crqms00163677 L2 IPv6 Support: Oxe Network : Code review comments treatment and treating MGR value
"NETWORK_MEDIA_PROTOCOL" in fw
crqms00181868 L2.300.19.a_IPNOSIS : GD3 CPU usage is high in idle state
crqms00181046 L2.300.17.a_IPNOSIS_IPV6_Network : GD3 reboots when using 10 RTP proxies in a network
IPv4/IPv6 call.
8.12 L2.300.23
crqms00184007 Unable to configure IPV4 sets to any domain
crqms00183794 No ringback tone on Nomadic CCA when calling external SIP-ISDN endpoint
crqms00183655 GlobalCallId session correlation (Conference part)
crqms00183604 GlobalCallId session correlation (Type change in static L2.300.16)
crqms00183626 PER 3077 - Slave user display is not proper in Associated room/guest management when
guest has been checked-out
crqms00183653 The Global Call ID usage for OT (CSTA part)
crqms00183677 Global Call ID for OT - Problem of GCID SIPSrv rejection
crqms00183625 Enabling MAO parameters for PER 3077
crqms00183550 Call Waiting indication: No waiting tone is heared in IP-OT-IP transfer scenario.
crqms00183623 GlobalCallId session correlation (ONLY for dynamic of L2.300.16)
crqms00183555 superviser set Busy is ringing if cac domain saturate
crqms00182068 no alarm at lost of OST64
New binaries
noe3gip_4.51.92
ost64_2.15
crqms00181739 KVM-Suse:OST64 IP Address is not reachable when installation is done using ALEDS tool
8.14 L2.300.21
crqms00182281 OXE:L1: No RBT When SEPLOS makes a SIP-ISDN call
crqms00182737 after login on DSS 80x8, DSU cannot connect anymore on DSS 40x8
crqms00182739 Identification of ALE Desk Phones : De-registar and re-registar of NOE3G to NOE2G DSS
reboots continuously
crqms00182736 Blanks for set types in mgr (new sets 80xx)
New binaries
noe3gip_4.51.91
ost64_2.14
crqms00179540 In-house unable to perform ftpput from INTIP3 to OST64
crqms00181846 In-house OXE_ost64 version not upgrade with system update
noe8018_4.80.24
END
twitter.com/ALUE_Care
facebook.com/ALECustomerCare
- END OF DOCUMENT -