Professional Documents
Culture Documents
WARNING: Manually installing the firmware will erase all saved data, content
and settings on your MINIX NEO U9-H.
2. After that, run this software. The user interface shall be the same as the
following picture.
4. Then attach the power adapter to the NEO U9-H, and connect NEO U9-H to the
Windows PC via an OTG cable that come with the box.
5. To flash the MINIX NEO U9-H firmware, the power button should be held down
for more than 6 seconds for the ‘Burning Tool’ to recognize that the NEO U9-H
is connected.
7. Then re-plug in the power adapter and press power button to start the NEO U9-
H. It will take a little while to boot after flashing.