Professional Documents
Culture Documents
1801P01
Strap-on QAD2…
temperature sensor
Strap-on sensor for acquiring the temperature of pipework.
Range of use -30… 125/130 °C / 5…95 % r. F. non-condensing
(not suitably for chillers)
Use
Type summary
Ordering
Equipment combinations
The QAD2… is suited for use with all types of controllers that can handle analog
passive sensor signals.
CE1N1801en
2017-12-01 Building Technologies
Function
Sensing element
1800 1.5
1801D01
1801D02
1600 1.0
1400 0.5
1200 0.0
1000 0.5
800 1.0
600 1.5
40 30 20 10 0 10 20 30 40 50 60 70 80 90 100 110 120 130 [°C] 40 30 20 10 0 10 20 30 40 50 60 70 80 90 100 110 120 130 [°C]
[K]
1847D01
160
1847D02
0.8
140
0.4
120 0.0
100
80
40 30 20 10 0 10 20 30 40 50 60 70 80 90 100 110 120 130 [°C] 40 30 20 10 0 10 20 30 40 50 60 70 80 90 100 110 120 130 [°C]
[K]
1847D05
1600
1847D06
0.8
1400
0.4
1200 0.0
0.4
1000
0.8
800
40 30 20 10 0 10 20 30 40 50 60 70 80 90 100 110 120 130 [°C] 40 30 20 10 0 10 20 30 40 50 60 70 80 90 100 110 120 130 [°C]
2/6
1847D09
1847D08
1.6
1.4
1.2
100000 1.0
0.8
0.6
0.4
0.2
10000 0.0
-0.2
-0.4
-0.6
1000 -0.8
-1.0
-1.2
-1.4
-1.6
100 -1.8
-30 -20 -10 0 10 20 30 40 50 60 70 80 90 100 110 120 130 [°C] -30 -20 -10 0 10 20 30 40 50 60 70 80 90 100 110 120 130 [°C]
Mechanical design
The connection terminals can be accessed after removing the housing cover. Cable
entry is made via a grommet (tension relief into housing). If required, the grommet can
be replaced by a Pg 11 cable entry gland.
Engineering notes
The permissible cable lengths are dependent on the controller with which the sensor is
used. They are specified in the Data Sheet of the relevant controller.
3/6
Siemens Clamp-on temperature sensor QAD2… CE1N1801en
Building Technologies 2017-12-01
Permitted mounting positions
~100 mm
Not permitted mounting
position
1801Z08
Disposal
The device is considered electrical and electronic equipment for disposal in terms of the
applicable European Directive and may not be disposed of as domestic garbage.
Dispose of the device via the channels provided for this purpose.
Comply with all local and currently applicable laws and regulations.
4/6
Internal diagram
1801G01
B M
5/6
Siemens Clamp-on temperature sensor QAD2… CE1N1801en
Building Technologies 2017-12-01
Dimensions (in mm)
5,5...9
11
4,5
60
20 22,2 60
1801M01
42,2 15...140 67
Published by:
Siemens Switzerland Ltd.
Building Technologies Division
International Headquarters
Gubelstrasse 22
6301 Zug
Switzerland
Tel. +41 58-724 24 24 © Siemens Switzerland Ltd 2014
www.siemens.com/buildingtechnologies Delivery and technical specifications subject to change
6/6