Professional Documents
Culture Documents
Installation Manual
DS-3E05 Series Gigabit Ethernet Switch Installation Manual
TABLE OF CONTENTS
Chapter 1 Introduction ................................................................................................................... 5
1.1 Overview ............................................................................................................................. 5
1.2 Packing List .......................................................................................................................... 5
1.3 Front Panel .......................................................................................................................... 6
1.4 Rear Panel ........................................................................................................................... 6
Chapter 2 Installation ..................................................................................................................... 8
2.1 Before You Start ................................................................................................................... 8
2.1.1 Preventive and Cautionary Tips................................................................................... 8
2.1.2 Working Environment Requirements........................................................................... 8
2.2 Installation........................................................................................................................... 9
2.3 Grouding ........................................................................................................................... 10
2.3.1 With Grounding Bar .................................................................................................. 10
2.3.2 Without Grounding Bar............................................................................................. 11
Chapter 3 Physical Connection ..................................................................................................... 13
3.1 Connecting RJ45 Port ......................................................................................................... 13
3.2 Connecting SFP Port .......................................................................................................... 13
3.3 Checking the Cabling ......................................................................................................... 13
3.4 Powering on Switch ........................................................................................................... 14
1
DS-3E05 Series Gigabit Ethernet Switch Installation Manual
2
DS-3E05 Series Gigabit Ethernet Switch Installation Manual
Regulatory Information
FCC Information
Please take attention that changes or modification not expressly approved by the party
responsible for compliance could void the user’s authority to operate the equipment.
FCC compliance: This equipment has been tested and found to comply with the limits for a Class A
digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference when the equipment is operated in a
commercial environment. This equipment generates, uses, and can radiate radio frequency energy
and, if not installed and used in accordance with the instruction manual, may cause harmful
interference to radio communications. Operation of this equipment in a residential area is likely to
cause harmful interference in which case the user will be required to correct the interference at
his own expense.
FCC Conditions
This device complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions:
1. This device may not cause harmful interference.
2. This device must accept any interference received, including interference that may cause
undesired operation.
EU Conformity Statement
This product and - if applicable - the supplied accessories too are marked with "CE" and
comply therefore with the applicable harmonized European standards listed under the
EMC Directive 2014/30/EU, the LVD Directive 2014/35/EU, the RoHS Directive 2011/65/EU.
2012/19/EU (WEEE directive): Products marked with this symbol cannot be disposed of
as unsorted municipal waste in the European Union. For proper recycling, return this
product to your local supplier upon the purchase of equivalent new equipment, or
dispose of it at designated collection points. For more information see: www.recyclethis.info
2006/66/EC (battery directive): This product contains a battery that cannot be disposed
of as unsorted municipal waste in the European Union. See the product documentation
for specific battery information. The battery is marked with this symbol, which may
include lettering to indicate cadmium (Cd), lead (Pb), or mercury (Hg). For proper recycling, return
the battery to your supplier or to a designated collection point. For more information see:
www.recyclethis.info
Industry Canada ICES-003 Compliance
This device meets the CAN ICES-3 (A)/NMB-3(A) standards requirements.
3
DS-3E05 Series Gigabit Ethernet Switch Installation Manual
Applicable Models
This manual is applicable to DS-3E05 series gigabit Ethernet switch.
Symbol Conventions
The symbols that may be found in this document are defined as follows.
Symbol Description
Provides additional information to emphasize or supplement
important points of the main text.
Indicates a potentially hazardous situation, which if not avoided,
could result in equipment damage, data loss, performance
degradation, or unexpected results.
Indicates a hazard with a high level of risk, which if not avoided, will
result in death or serious injury.
4
DS-3E05 Series Gigabit Ethernet Switch Installation Manual
Chapter 1 Introduction
1.1 Overview
Hikvision DS-3E05 series unmanaged switches are layer 2 gigabit network switches, providing
8/16/24 10/100/1000M Ethernet ports and 1 10/100/1000M SFP fiber optical port. It is reliable, easy
to install and maintain, and equipped with rapid switch function. It has multiple access ports, and
is applicable for access or aggregation and upload of small-scale LAN devices.
Item Quantity
Switch
1
2
L-shaped bracket
1
Power cord
4
Screw
User manual
5
DS-3E05 Series Gigabit Ethernet Switch Installation Manual
① ② ③ ④
2 4 6 8
4 8
PWR 1 5 9 1 3 5 7
Refer to the following table for the description of DS-3E0509 front panel.
Table 1-1 DS-3E0509 Front Panel Description
No. Name Status Description
4 SFP port
6
DS-3E05 Series Gigabit Ethernet Switch Installation Manual
① ②
PWR
Refer to the following table for the description of DS-3E0509 rear panel.
Table 1-2 DS-3E0509 Rear Panel Description
No. Name Descrption
1 Grounding Used to connect the ground cable to protect the switch from
terminal lightening. For details, refer to 2.3 Grouding.
2 Power supply Use the attached power cord to connect the switch to socket.
7
DS-3E05 Series Gigabit Ethernet Switch Installation Manual
Chapter 2 Installation
2.1 Before You Start
Before connecting and operating your switch, please be advised of the following tips.
Environment Cleanliness
Dust may lead to electrostatic adsorption. To protect the device from static electricity harm, pay
attention to the following requirements:
Keep the environment air clean. A regular dusting is necessary.
Make sure the device is grounded well.
Lightning Protection
In thunderstorm weather, a sudden strong current may damage the switch. To protect your switch
from lightning strike or strong current, please:
Make sure the switch, rack, installation desktop, and power socket on the wall all are
well-grounded.
Route the switch cables properly.
If you need to route cables outdoors, it is advised to use a lightning arrester.
8
DS-3E05 Series Gigabit Ethernet Switch Installation Manual
Installation Position
No matter whether your switch is installed on a rack or desktop, follow the instructions below:
Installation position must be stable and firm enough.
Installation position must be clean, dry, and well-ventilated. Keep at least 10 cm distance
between all sides for cooling.
Do not place any heavy or big-size object on the switch.
Keep at least 1.5 cm vertical distance between each switch while installing it on a rack.
2.2 Installation
The switch only supports rack installation. Follow the steps below.
Step 1 Fix the rack on the ground, stable and level. And ground the rack well.
Step 2 Use the attached screws to fix L-shaped brackets to the sides of the switch.
Step 3 Place your switch on the rack and fix it to the rack with self-prepared screws.
9
DS-3E05 Series Gigabit Ethernet Switch Installation Manual
2.3 Grouding
Purpose:
Grounding is used to quickly release overvoltage and overcurrent induced by lightening for switch,
and to protect personal safety for people. Select the appropriate grounding method according to
your needs.
10
DS-3E05 Series Gigabit Ethernet Switch Installation Manual
Grounding Terminal
Grounding Cable
Grounding Bar
Figure 2-3 Grounding with Grounding Bar (for DS-3E0509)
Connect the grounding cable to the grounding system in the equipment room. Do not connect it to
a fire main or lightning rod.
11
DS-3E05 Series Gigabit Ethernet Switch Installation Manual
Grounding Terminal
Grounding Cable
Angle Steel
Earth
If the conditions for burying the grounding body are not available, an AC-powered Ethernet switch
can be grounded using the PE (Protective Earth) wire of the AC power supply. The precondition is
that the power cord of the switch should adopt 3-pin cable with protective earth wire, and the AC
power supply protective earth wire has been well grounded on the side of distribution room or AC
power supply transformer.
12
DS-3E05 Series Gigabit Ethernet Switch Installation Manual
Aggregation Switch
13
DS-3E05 Series Gigabit Ethernet Switch Installation Manual
The operating power supply should accord with rated input standard.
Ports cablings and grounding cable are correctly connected.
If there is outdoor cabling, connect a lightning rod and lightening arrester to the cable.
Lightening
Rod
Other Network Devices
Grounding Grounding
Cable Terminal
Network
Cable
UD07682B
0100001071016
14
DS-3E05 Series Gigabit Ethernet Switch Installation Manual
15