Professional Documents
Culture Documents
FM Telephone Bug
Parts
Notes
1. L1 is 7 turns of 22 AWG wire wound on a 9/64 drill bit. You may need
to experiment with the number of turns.
2. By stretching and compressing the coils of L1, you can change the
frequency of the transmitter. The min frequency is about 88 Mhz, while
the max frequency is around 94 Mhz.
3. The green wire from the phone line goes to IN1. The red wire from the
phone line goes to IN2. The green wire from OUT1 goe sto the phone(s), as
well as the red wire from OUT2.
4. The antenna is a piece of thin (22 AWG) wire about 5 inches long.
5. All capacitors are rated for 250V or greater.
6. The transmitter is powered by the phone line and is on only when the
phone is in use. S1 can be used to turn the transmitter off if it is not
needed.
7. If you have problems with the LED burning out, then add a 300 ohm 1/4W
resistor in series with it.