Appendix C
Welding Symbols and DrawingsGROOVE OR BUTT
See Ay eever
BASIC WELD SYMBOL.
WELD ALL! FIELO ee
arouno | WELO | ci uch | convex |
SUPPLEMENTARY WELD SYMBOLS.FINISH SYMBOL GROOVE ANGLE OR INCLUDED
ANGLE OF COUNTERSINK
CONTOUR SYMBOL FOR PLUG WELOS
ROOT OPENING, DEPTH
(OF FILLING FOR PLUG, LENGTH OF WELD, cm
AND SLOT WELDS: e
ry PITCH (¢.T0 ¢, SPACING)
‘OF WELDS, cm
SIZE,cm
REFERENCE LINE ®
WELD -ALL-AROUNO SYMBOL,
SPECIFICATION PROCESS)
ca creen nearer FIELO WELO SYMBOL
2
TAIL (MAY BE OMITTED
WHEN REFERENCE
isnotuseo} ARROW CONNECTING REFERENCE
LINE To ARROW SIDE OF JOINT
{ALSO POINTS TO GROOVED
MEMBER IN BEVEL ANO J
GROOVED JOINTS }
teore | sives)
Basic WELO SYMBOL,
‘OR DETAIL REFERENCE:
STANDARD LOCATION OF ELEMENTS OF A WELDING SYMBOL
‘Symbols for welded joints recommended by the American Welding Society. Size, weld symbol,
length of weld, and spacing must read in that order fom lft right along the reference line,
regardless ofits orientation or arrow location. The perpendicular leg of symbols for ile, bevel, J
and flarebevel groove welds must be of ef. Artow and Otherside welds shouldbe the soma size.
‘Symbols apply between abrupt changes in cretion of welding unless governed by the ° ll around.
symbol or otherwise dimensioned. When biting of detail material discloses the identity ofthe for side
of omember (such as stifened web or russ gusset) withthe near side, welding shown forthe near
side shoal also be duplicated onthe far side
C2 Welding Symbols and DrawingsFLAT POSITION.
1
“\ ania of weia
Horizontal
BILLET WELDS
‘CONVEXITY, C,
SHALL MOT EXCEED
(018 +003 CH.
wad
sceerraaie FALeT weLo PROFLE,
‘OVERHEAD POSITION