PEDANT
ISO 9001:2008 CERTIFIED‘We know already that the differences definitely exist but how to define them? How
to avoid problems during the implementation resulting from not identifying the
local needs? The Fit & Gap analysis may be helpful — a standard element of BCC
Go Forward methodology for the rollout project.
Prior the Fit & Gap analysis, the parent company should determine which areas of
the system will be subject to the analysis (will be implemented in the local
company as a target). It depends above all on the business activity profile of the
local company ~ if it is for example a dealership, then the logistics processes will
be included in the scope of the analysis, and the produetion processes will be
excluded.
The Fit & Gap analysis may be performed by the parent company organization or
by the implementation partner If the partner is responsible for the execution, the
trainings for the consultants in the area of the existing template may be necessary
prior the analysis (particularly if the documentation of the template is not
available)
Fit & Gap analysis is divided into three stages:» Stage 1. Preparation of a solution template for the trainings. This stage includes
gathering of the template documentation (business blueprint, manuals, technical
documentation) and preparation of the training system (e.g. on the test system). The
sample data (e.g. materials, customers, vendors) should be obtained from the new
company and loaded to the training system. It shall enable the employees of the
local company to better identify the discussed processes.
» Stage 2. Training of the project team members (key users) in the scope of
implemented processes in the template system. The owners of the template business
processes present the functionality available in the system to the users from the
local company.The implementation consultants, a particularly the consultants
familiarized with the local legal regulations, should participate in such a training.
> In particular cases, if there is a problem in the local company to communicate in
the project language. this stage may be divided into two sub-stages: Training of the
implementation consultants in the scope of template processes executed by the
owners of the processes in the project language, and then training of the members
of the project team from the local company by the implementation consultants in
the local language.Stage 3. Sessions of project teams devoted for the determination of the differences
between the presented processes and local needs.On the basis of the knowledge
gained during the trainings, the employees of the local company indicate the
differences between the process modelled in ERP system and the process currently
operated in the company.It is necessary to indicate all perceived differences.
The decision, whether the difference will be implemented in SAP system or an
organizational change by the company will be required or whether the process will
remain in the existing form, should not influence the fact of registering the
discrepancy. The reported differences should be registered, using the project tools
applied in the organization (e.g. a list of differences in SharePoint portal or at least
common Excel sheet available in the network directory). Each difference should be
described by means of the following attributes:
ID of the difference (GAP_ID) — numeric identifier,
module — specification of the area, where the gap was identified (e.¢ MM, FI).
process that it refers to — specification of the process that this difference refers to
(eg, purchase of the raw material),reporting person — full name of the person reporting the difference,
business need — business justification for the existence of the given difference,
type (legal, local) — information whether the given difference results from the
legal regulations,
priority (high, medium, low) — information on the degree of the significance of
the difference,
estimated workload of the implementation of the changes in the system (e.g
number of days of the consultant work) — it allows to compare the significance of
the change with the workload for its implementation,
Additionally, the tool used for the registration of the differences should enable the
changing of the difference status (e.g. accepted, rejected, under analysis) and
tracking of the change history.
The decision, whether the difference will be implemented in SAP system or an
organizational change by the company will be required or whether the process will
remain unaltered, should not influence the fact of registering the difference
“T do not understand the standard”» During the Fit & Gap analysis, it is necessary to consider several factors that may
adversely influence its course.
» In the international projects, one of the challenges is to determine the project
communication language (usually it is the English language) and the selection to
the project team of the persons effectively using this language. If one of the key
persons does not communicate in the project language, it is necessary to devote
time and budget for the translation of the project documentation to the local
Ianguage and again to the project language. Additionally, the presence of the local
consultant, knowing the language, may be necessary to perform the analysis in the
given area (in this case, an earlier knowledge transfer about the template to the
local consultant is to be taken info consideration).
> An essential factor negatively affecting the success of the rollout projects is the fear
of the changes that the new system brings to the company. The trainings in the
scope of the template system, which are the elements of the Fit & Gap analysis, are
‘a good practice to overcome these concems.Additionally, making the system
available to the members of the project teams and encouraging them to self
execution of the processes facilitate the further communication.» Another factor is the difliculty in understanding the local cixcumstances by the
international consultants, “We are already integrated with this bank, so it will surely
also work in Poland” - such a sentence is often heard from the corporate
consultants. They do not take into consideration that the same bank in different
countries uses different file formats for integration. Unfortunately, we often meet
with similar simplifications and erroneous assumptions that are identified only
during testing or after going live. The engagement of the local consultant allows to
minimize the occurrence of this risk
> Why do we need a local consultant?
» As illustrated by the examples cited earlier, the involvement of the local consultant
is one of the key elements of the success of Fit & Gap analysis (as well as of the
entire project). What can and should be expected? Below, we present three major
tasks:Delivery of the gap list that occur most often during the implementations in the
given country and/or in the given industry (ready material for the discussion with
the local company, checklist in order to ensure that we have not missed something
that might be important);
Verification on a current basis of the requirements placed by the members of the
project team (with regards to the legal requirements) and suggestion of solutions
generally applied in other local companies instead of “reinventing the wheel” by
the consultants from the corporation:
Better level of communication with the employees of the local company
(limination of the problems resulting from the language barriers).
‘We have differences and what's next?
Each of the difference registered during the analysis should be then verified with
regards to the reasons of its operation:» Does the current mode of operation result from the legal regulations2If yes, it is
likely to take this difference into consideration in the system. In the specilic cases,
it may be decided to implement the given funetionality outside the system.
» Does the current mode of operation result from the local organization? If yes —
what happens, if the process will be changed to comply with the corporate one? If
the current process is better than the corporate process, two scenarios are possible:
Decision on the implementation of the change in the system, but only for the local
‘company or decision on the change of the template process (it cannot be excluded
that during the rollout the corporation will also lear something from its branches)
» The entire Fit & Gap analysis should last from two to three weeks (depending on
the complexity of the implementation).lts result should be a list of all registered
differences along with the information on the method of their execution after the
implementation Since the implementation of these differences may influence the
processes that are already operating in other countries, it is necessary to remember
to plan tests of these processes prior going live (so called regression tests) for other
countries using this system. But this is a step belonging to the next stages of the
project that will be performed much easier thanks to the reliably performed Fit &
Gap analysis.> Thank You