Professional Documents
Culture Documents
Ref11 KCI - FI001830053
Ref11 KCI - FI001830053
981~986, 2013
http://www.ksmt.kr ISSN 1229-604X
〈학술연구〉
권 승 탁* ․ 문 하 영** ․ 이 계 철***
Key Words : Regulator, DC-DC converter, Dickson Charge pump, Voltage Monitor, Switched-Capacitor
Abstract
In this paper, we present a CMOS voltage regulator for application in electric device. This works shows
that unlike the traditional voltage converter, this regulator can achieve high efficiency with a good step-down
voltage ratio. The circuits which are implemented in this paper is simulated with LT SPICE tool of computer.
2.2 온도계 코드
× (1)
2.3 전압 측정값 확인 회로
3. 전압 관찰 회로 설계
전압을 단계적으로 하강시키는 회로는 저항과
전압 관찰 시스템의 회로는 Fig. 1에서 보는 비교기를 이용하여 Fig. 4와 같이 설계하였다. 이
바와 같이 비교기 블록, 엔코더 블록, 스위치 블록, 회로는 주어진 전압 (vbi)을 저항을 이용하여 여러
전압 측정결과를 확인할 수 있는 관찰 블록 등으로 단계로 전압을 하강시키는 회로를 만들고 각 단계
구성하였다. 에서 만들어지는 전압 점에서 비교기로 입력되는
선과 전압크기를 선택하기 위한 두 개의 출력 포트
3.1 전압 비교기 회로 를 만든다.
3.2 스위치 회로
3.4 전압 표시기
4.3 측정전압 선택 신호 출력
4.1 전압 비교기
4.2 전압 비교들의 출력
권 승 탁 (Seungtag Kwon)
He received B.S. degree in electronics engineering from Wonkwang University, Korea 1987 and the M.
S. and Ph.D. degrees in electronic engineering from Jeonbuk National University, Jeonju, Korea in 1989
and 1997, respectively. From 1992 to 2013, he was an Professor at the Department of Electronic
engineering, Seonam university. 2006 to 2008, and 2012 he was an visiting Professor at the Department
of Electric and computer engineering, BoiseState University, ID, USA. His research interests include low
power and low voltage CMOS circuits, VLSI design.