Professional Documents
Culture Documents
NEW PARTIAL
UN-ORDER
FEATURE
SEPARATE
Version 9.04
COMMANDS FOR
PLACING A BENT
BAR LIST ON New partial un-order feature
DRAWING The inclusion of a new partial un-order feature means that you can make changes to ordered
releases without having to un-order the entire release. Selected ordered bars can be re-assigned to
PLACE MULTIPLE
the Unassigned release, therefore allow these to be updated and re-ordered.
BARS LISTS ON
THE DRAWING IN
ONE OPERATION
ENHANCED
HIGHLIGHT BARS
IN DRAWING
COMMAND
SPECIFY
REVISION LEVELS
FOR EACH
REVISION TYPE
CONTROL OVER
WHETHER MATCH
AND COMPACT
BARS UPDATES
ISSUED SHEETS
ABILITY TO
MANUALLY EDIT
ALL REVISIONS
NEW UN-
COMBINE
FEATURE
UPDATED
COUPLER
LIBRARIES
CONTROL OVER
WHETHER BAR
MARKS ARE
REPORTED FOR
STRAIGHT BARS
CONTROL OVER
THE ORDER IN
WHICH SKETCHES
APPEAR IN THE
SHAPE TABLE
AUTOCAD
MECHANICAL
NOW A SUPPORT
PLATFORM FOR
REBARCAD
Separate commands for placing a bent bar list on drawing
With previous versions of RebarCAD v9.0 you could only switch between generating a bar list and
REBARCAD NOW bent bar list on drawing by revising the bar list configuration. RebarCAD v9.04 offers a new bent bar
TOLERATES list command so that you can instantly place the type of bar list you require.
AUTOCAD FIELDS
IN TITLE BLOCKS
ADDITIONAL
CHECK DATA
WARNING FOR
RE-USED
DRAWINGS
REFRESHING ALL
VPM VIEWPORTS
IN ONE
OPERATION
Place multiple bars lists on the drawing in one operation
RELEASE
DESCRIPTIONS The Place Bar List (and Bent Bat List) on Drawing commands now support the selection of multiple
NOW AVAILABLE drawing sheets and release, so any number of bars lists can be inserted in a single operation.
IN BAR LIST
FIX TO OUTPUT
PROBLEM OF
ROGUE
CHARACTERS FOR
FRACTION
SYMBOLS
CONFIGURE THE
FORMAT OF
IMPERIAL UNITS
IN THE
STANDARD CSF
OUTPUT
SPORADIC
RESETTING OF
CURRENT LAYER
(CLAYER) FIXED
DIRECT ACCESS
TO THE EXCEL
AND PDF BAR
LIST OUTPUTS
DRAWING
COMPATIBILITY
STABILITY
IMPROVEMENTS
Enhanced Highlight Bars in Drawing Command
MANY MORE This useful tool that enable you to identify bars on the drawing directly from the bar list has been
ENHANCEMENTS further extended to use the AutoCAD zoom feature, and to enable easy cycling through all associated
HAVE ALSO BEEN bar sets.
MADE!!!
Specify revision levels for each revision type
You can now specify individual revision levels for each revision type. For example you could have a
series of preliminary revisions levels such as P1, P2, P3, and then switch to tender revisions level of
T1, T2, and so on.
Control over whether match and compact bars updates issued sheets
Previous versions of RebarCAD only warned that issued pages may be updated by use of the match
and compact bars commands. RebarCAD v9.04 now allows you to specify that only bars on un-issue
drawings sheets should be updated. This allows you to detail further drawing sheets in the
knowledge that no unexpected revisions will be made to already issued sheets, following use of the
match and compact commands.
Ability to manually edit all revisions
The drawing and bar list revision level of each individual bar can now be edited directly via a new
Override Revision Mark command. This allows users complete control over revisions in those cases
where deviation from the rigid revision system is desirable. This includes the ability to manually
override all revision headers also.
Control over whether bar marks are reported for straight bars
You can now directly control whether bars marks are shown for straight bars when producing a bar
list on drawing or printed reports. This reinstates the equivalent options in RebarCAD v8.
Control over the order in which sketches appear in the shape table
The order in which sketches appear in the shape table on drawing can now be controlled using the
same configurations that apply to the list of bend types. You can now produce the shape table you
require without the need for any manually editing. You could for example configure that sketches for
all main bars to be shown first, and then those the stirrups, and then ties, etc.
Drawing compatibility
Drawings produced from any previous version of RebarCAD can be opened within v9.04. The
program will automatically offer to convert any v8 drawings to work under v9. Changes to
accommodate the new features in this release means that you will not be able to open v9.04
drawings in any previous version of RebarCAD v9. We advise all users to upgrade to v9.04 in order
to facilitate unhindered file sharing. The Save As v8.4 feature has been retained so as to offer a
complete range of drawing sharing options.
Stability improvements
Continuing steps have been taken to further improve the stability and performance of RebarCAD v9.
These improvements continue to increase the operational limits of the program especially when
numerous larger drawings are loaded concurrently.