NOVA PETROCHEMICALS INC.
SPECIFICATIONS FOR
PROCESS & UTILITY PIPING
ENGINEERING
‘STANDARD
Issue | REVIstoN | ANSI CLASS 150, 00°F (425°c) Max. | HA-110, Sect. B
aApP‘D| JET. GLASS _A4A_(A13A) (1)
Dave | JAN./91 15 (CARBON STEEL) PAGE 1 OF 2
ITEM ‘SIZE DESCRIPTION ‘SPECIFICATION
EERE Plain End (2,7) 1/2" to 2" ‘Smile Sch. 80 A106 Gr. B
Bevel End (3) 3" to 10" — Smls or ERW Sch. 40 AS3 Gr. B
Bevel End (4) a2" Smls or ERW Std. Wt. AS3 Gr. B
Bevel End (4) 14" 6 16" — Smls or ERW Sch. 10 —AS3 Gr. B
Bevel End (4) 18" to 24" Smls or ERW, Std.We. 53 Gr. B
Bevel End (5) 26" to 30" -EFW, 0.25" Wall. A672, C70, C112
Bevel End (5) 34" to 42" BFW, 0.312" Wall A672, C70, C1.12
Bevel End (5,6) 48" to 96" EFW, 0.375" Wall A672, C70, Cl.12
Bevel End (5) 102" BFW, 0.438" Wall A672, C70, C1.12
VALVES Gate (9) 3/4" 800# Male S.W. X Fml (31,720)
(7/8) Th'd 0.8. & ¥ (API 606)
Gate 2" & Under —-800F S.W. 0.8. & ¥ (30,240)
Gate (10,11) 10" & Above Fig'd. (Special)
Globe 2" & Under 800F S.W. 0.8. & ¥ (32,220)
Check 2" & Under 800# S.W. Horiz. Piston (33,520)
FLANGES Socketweld (10) 1/2" to 2" 180 RF. A105
(12,16) Weldneck (10,12,17) 3" & Rbove —-150# R.F. Bore To A105
Match Pipe
FITTINGS Socketweld 1/2" to 2" 3000# A105
Buttweld 3" to 36" Sch. to Match Pipe A234WPB
(13,14) 48" & Above Plate AS16-70
Gaskets ALL Spiral Wound to A.P.I. “FLEXITTALIC
601, 304 or 316 S.S. style CG" or
Windings with Carbon Approved Equal.
Steel Outer Ring
Bolting ALL studs 319387
nuts 194-24
JOINTS Maintenance (15) 2" & Under Union 3,000# (with ‘A105,
Integral Seats)
3" & Above Flange A105,
Normal 1/2" to 2" Coupling 3000# A105,
3" & Above _Buttweld
STD.HA-110/AB. 25NOVA PETROCHEMICALS INC.
REVISION
‘JET
| pave | gan. /91
15
SPECIFICATIONS FOR
PROCESS & UTILITY PIPING
ANSI CLASS 150, 800°F (425°C) MAX.
CLASS_AGA_(A13A) (1)
(CARBON STEEL)
ENGINEERING
‘STANDARD
HA-110, Sect. B
PAGE 2 OF 2
NOTES:
1. This is a special class for transfer line piping.
(510°C).
2. Nipples and swages for vent, drain, orifice taps and other de
connections shall be Al06-B, Sch. 160.
flange taps and backweld.
Upset temperature 950°F
-ended
Use (7.0.E.) nipples on orifice
For in-line nipples & swages use pipe schedule.
3. only use AS3 G. B or API SL Gr.B up to 00°F (260°C) normal operating
pemperature. Above 500°F (260°C) use Ai06 Gr.B.
4. Only use AS3 Gr. B or API SL Gr. B up to 00°F (260°C) normal operating
temperature. Above 500°F (260°C) use A672.C70.C1.12.
5. Previous material specifications were A155 C55.C1.2 and A672 C55.C1.13.
6. Branch connections require reinforcing pads, refer to drawings.
7. Gussetting shall be provided in accordance with HA~100.
8. For full descriptions of valve codes and how to specify valv
111, Section B.
) refer to HA-
9. Use for vent and drain connections. For orifice flanges use 800# S.W. x
Th'd (30,260).
10. Specify gasket contact surface finish as smooth, 125-175 AARH.
aa. The
type.
12. 8.0. flanges used on original standard, 10" and larger.
are special valves used on transfer lines. “Rhefl
A, flanges notes regarding restrictions on S.0. Flanges.
" parallel slide
Refer to Section
13. Fittings fabricated from plate. Same thickness as pipe. Previous material
specification was A285 Gr.c.
14. 11/20 Mitred Bends (4 Welds for 90° Bend, 2 Welds for 45% Bend).
15. The use unions to be kept to a minimum.
16. Flanges 26" and above to be API 605, A105.
specified 175# Taylor Forge).
17. Use 1 1/2" W.N. Flanges for thermowells.
PIPING FABRICATION PER HA~150 RADIOGRAPHY 108.
STD.HA-110/AB. 26
(Original L.c.c.L. Standard