Professional Documents
Culture Documents
1. Prepare a pocket and attach it to the front body. 2. With front/outer side facing each other,
sew front and back body.
Stitch at 0.2cm from the edge. Stitch at 1cm from the edge.
2cm
Pattern and Cutting layout With front/outer side facing each other,
Fold it in half using an iron. sew the neckline and bias strip together.
All measurements are in centimeters (cm).
Numbers in circles denote seam allowance.
5. Attach the sleeve and sew under the sleeve.
All seam allowances 1cm unless otherwise stated.
Front body
2.8 (front/outer side) Folded bias strip.
0.5 15 Back body Stitch at 0.5cm
Run a zigzag stitch (Cut off the excess)
(reverse side) from the edge.
24 Fold line along the side seam. Sleeve
15 3
2 (reverse side)
20 17 Fold the bias strip inside and run a stitch over.
Sleeve Front body
×2 (reverse side) Run a zigzag stitch around the sleeve seam.
End of sleeve position Sleeve
(reverse side)
Front body
Stitch at 0.8cm (front/outer side)
Front body/Back body Stitch at 1cm With front/outer from the edge.
×2 3 from the edge. side facing each other,
sew the body and Press the seam
Back body
sleeve together. open.
Fold line (front/outer side)
Pocket 7. Double fold the cuff and
×1 15 hem and stitch to finish.
Front body
83 8 (front/outer side) Sleeve Sew underside
Body of the sleeve.
(reverse side) Sleeve
(reverse side)
15 (front/outer side)
1cm 1cm
Pocket location
3
(front right only) 6. Sew the sides.