This document provides specifications for various materials used in fasteners and washers. It establishes that specifications sheets take precedence over the text in any conflicts. Material specifications are provided for brass, aluminum, and steel sheets as well as steel wire and malleable iron in accordance with various ASTM standards. Dimensional requirements and protective finishes must comply with those listed in the applicable specifications sheet or military standard.
This document provides specifications for various materials used in fasteners and washers. It establishes that specifications sheets take precedence over the text in any conflicts. Material specifications are provided for brass, aluminum, and steel sheets as well as steel wire and malleable iron in accordance with various ASTM standards. Dimensional requirements and protective finishes must comply with those listed in the applicable specifications sheet or military standard.
This document provides specifications for various materials used in fasteners and washers. It establishes that specifications sheets take precedence over the text in any conflicts. Material specifications are provided for brass, aluminum, and steel sheets as well as steel wire and malleable iron in accordance with various ASTM standards. Dimensional requirements and protective finishes must comply with those listed in the applicable specifications sheet or military standard.
the or@nizationswh.lchprew, or whichdistribute the docunents.These doctunents alsomay be svailablein or throughlibrariesor otherinfometional services. )
2.3 Orderof precedence.In the eventof a conflict between the textof
this specification and thq nferencescitedherein(exceptforaaeoclated detailspecif icatlons, specifi=tion sheetsor MS standards), the textof this specif icat lon ehslltakeprecedence.Nothingin thisspecification, houever, shallsupersede applicablelSWSand regulationsunlessa specificexsmptionhas beenobtained.
3.1 sheets. The individual
Speciffcatfon itemrequi.remanta shall be as specifiedhem4n and in accordancewiththeapplicable specif icatIon sheet. In the eventof any conflictbetweenthe requirements of thisspecification and the specificationsheet,the lattershallgovern(see6.2). 3.2 Material. 3.2.1 Braessheet. Brass.sheet shallbe 260 (oNSc260Do)or 268 (uNS C26800)in accodancewithASfMB36. 3.2.2 Ald.nun sheet. Alunlntnn sheetshallbe condition T6 in accordance withQ+A-~/ 11. 3.2.3 Steelsheet. Steelsheetshallbe formedof coldrolledsheetsteel in accordance with ASTM A366or ASTMA619.
3.2.4 Steelulre. Steelwire shallbe in accordance
withA.STU A51O. 3.2.5 —— Halleableiron. &lleable ironshallbe in accordance withASTMA47. 3.3 Dimensions.Dimnsionsand tolerances forall fpumnetsand uashers ekll be in accordancewiththe dimensional requirenmtaof the applicable specificationsheetor mfliw standard. 3.4 P~tectivefinish. The protect ive finishes in the applicable speci- fication sheet or military stsndami Shall be as roll-:
3.4.1 Nickelplating(electmdeposited).Nickelplatingshallbe Class s