Professional Documents
Culture Documents
Fast Ethernet 0
Fast Ethernet 0
Switch(config-if)#
%LINK-5-CHANGED: Interface Vlan1, changed state to up
Switch(config-if)#end
Switch#
%SYS-5-CONFIG_I: Configured from console by console
Switch#line vty 0 15
^
% Invalid input detected at '^' marker.
Switch#conf
Switch#configure t
Enter configuration commands, one per line. End with CNTL/Z.
Switch(config)#line vty 0 15
Switch(config-line)#password cisco
Switch(config-line)#login
Switch(config-line)#exit
Switch(config)#enable password cisco
Switch(config)#
Switch(config)#
Switch(config)#
Switch(config)#
Switch(config)#
Switch(config)#
Switch(config)#
Switch(config)#
Switch(config)#
Switch(config)#
Switch(config)#
Switch(config)#
Switch(config)#
Switch(config)#
Switch(config)#
Switch(config)#
Switch(config)#
Switch(config)#
Switch(config)#
Switch(config)#
Switch(config)#
Switch(config)#
Switch(config)#
Switch(config)#
Switch(config)#
Switch(config)#
Switch(config)#
Switch(config)#
Switch(config)#
Switch#
%SYS-5-CONFIG_I: Configured from console by console
Switch#
Switch#copy
Switch#copy run
Switch#copy running-config st
Switch#copy running-config startup-config
Destination filename [startup-config]?
Building configuration...
[OK]
Switch#
Switch#
Switch#exit
Switch con0 is now available
Switch>enable
Password:
Switch#
Switch#vlan database
% Warning: It is recommended to configure VLAN from config mode,
as VLAN database mode is being deprecated. Please consult user
documentation for configuring VTP/VLAN in config mode.
Switch(vlan)#
Switch(vlan)#exit
APPLY completed.
Exiting....
Switch#configure terminal
Enter configuration commands, one per line. End with CNTL/Z.
Switch(config)#interface FastEthernet0/1
Switch(config-if)#
Switch(config-if)#exit
Switch(config)#interface FastEthernet0/2
Switch(config-if)#
Switch(config-if)#exit
Switch(config)#interface FastEthernet0/5
Switch(config-if)#
Switch(config-if)#exit
Switch(config)#interface FastEthernet0/7
Switch(config-if)#
Switch(config-if)#exit
Switch(config)#interface FastEthernet0/1
Switch(config-if)#
Switch(config-if)#exit
Switch(config)#interface FastEthernet0/24
Switch(config-if)#
Switch(config-if)#exit
Switch(config)#interface FastEthernet0/20
Switch(config-if)#
Switch(config-if)#exit
Switch(config)#interface GigabitEthernet0/1
Switch(config-if)#
Switch(config-if)#exit
Switch(config)#interface GigabitEthernet0/2
Switch(config-if)#
Switch(config-if)#exit
Switch(config)#interface GigabitEthernet0/1
Switch(config-if)#
Switch(config-if)#exit
Switch(config)#interface FastEthernet0/23
Switch(config-if)#
Switch(config-if)#exit
Switch(config)#interface FastEthernet0/9
Switch(config-if)#
Switch(config-if)#exit
Switch(config)#interface FastEthernet0/1
Switch(config-if)#
Switch(config-if)#exit
Switch(config)#interface FastEthernet0/15
Switch(config-if)#
Switch(config-if)#
Switch(config-if)#end
Switch#
%SYS-5-CONFIG_I: Configured from console by console
Switch#conf t
Enter configuration commands, one per line. End with CNTL/Z.
Switch(config)#line console 0
Switch(config-line)#password cisco
Switch(config-line)#login
Switch(config-line)#exit
Switch(config)#ex
Switch#
%SYS-5-CONFIG_I: Configured from console by console
Loading "flash:/c2960-lanbase-mz.122-25.FX.bin"...
#########################################################################
# [OK]
Restricted Rights Legend
Switch>
Switch>enable
Switch#
Switch#conf
Switch#configure ter
Enter configuration commands, one per line. End with CNTL/Z.
Switch(config)#hos
Switch(config)#hostname S607
S607(config)#EX
S607#
%SYS-5-CONFIG_I: Configured from console by console
S607#conf t
Enter configuration commands, one per line. End with CNTL/Z.
S607(config)#
S607(config)#vlan 331
S607(config-vlan)#name Dosen607
S607(config-vlan)#ex
S607(config)#vlan 431
S607(config-vlan)#name Mhs607
S607(config-vlan)#ex
S607(config)#int
S607(config)#interface vlan 331
S607(config-if)#
%LINK-5-CHANGED: Interface Vlan331, changed state to up
S607(config-if)#ip ad
S607(config-if)#ip address
S607(config-if)#ip address 172.166.3.1 255.255.255.248
S607(config-if)#no shu
S607(config-if)#no shutdown
S607(config-if)#
S607(config-if)#ex
S607(config)#interface vlan 431
S607(config-if)#
%LINK-5-CHANGED: Interface Vlan431, changed state to up
S607(config-if)#ip
S607(config-if)#ip ad
S607(config-if)#ip address 192.169.3.1 255.255.255.192
S607(config-if)#no shut
S607(config-if)#no shutdown
S607(config-if)#
S607(config-if)#ex
S607(config)#
S607#
%SYS-5-CONFIG_I: Configured from console by console