Professional Documents
Culture Documents
Standard Profile Catalogue Interactive April 2015 PDF
Standard Profile Catalogue Interactive April 2015 PDF
Catalogue
April 2015
=
=
=
Introduction
Synopsis
This Hulamin Extrusions Standard Profile Catalogue lists the
range of standard dies available at the time of going to press.
Range
The range of extrusions available is constantly changing and
enquiries for shapes not listed can be made through any of
our sales offices. Please also refer to our website,
www.hulaminextrusions.co.za for the latest version of this
catalogue.
Shape
All dimensions are expressed in millimeters (mm). Fully
dimensioned die drawings are available from any one of our
sales offices which can provide complete details of any
section required.
Mass
All profile masses are expressed in kilograms per metre (kg/m).
=
=
Hulamin Extrusions
Hulamin Extrusions has a proud record of extrusion supply Hulamin Extrusion's customer base covers all the major
both locally and throughout the world. Our commitment is to market segments in the Southern African market, extending
build a reputation with our customers for quality and service. into the demanding engineering markets within the United
Kingdom, Europe and North America.
Company Profile
In Southern Africa Hulamin Extrusions are the leaders in
The aluminium extrusion business of Hulamin Extrusions was developing extrusions for a diverse range of markets which
founded 40 years ago by Alcan. design products and solutions using the benefits of extruded
aluminium.
Today Hulett Extrusions have production plants in
Olifantsfontein, Pietermaritzburg and a sales office in Cape Quality from Start to Finish
Town. Our expertise and reputation emanates from our
diverse shareholder background which includes Hulamin Extrusions operates a quality management system
approved to ISO 9001:2008 and dimensional tolerances to EN
« Alcan - the founding company. 755. This system allows quality management from an initial
« Huletts Corporation - who acquired the majority contract review through to product shipment. Laboratory
shareholding from Alcan in 1974. facilities are also available to assist with quality assurance
« Tongaat Hulett - Huletts Corporation merged with the and any necessary metallurgical testing.
Tongaat Group in 1981 and the name was changed to Hulett
Aluminium in 1982. Alcan subsequently sold its remaining Hulamin Extrusions also boast the prestigious ISO
26% shareholding and Hulett Aluminium became a wholly 14001:2004 Environmental Management Systems
owned subsidiary of Tongaat Hulett in 1986. accreditation, proudly looking after our environment and
« Hydro Aluminium Extrusions - one of the world's leading promoting the recycling of aluminium and other process
extruders became a shareholder in the extrusion division waste.
during the period 1997 to 2008.
« Hulamin Extrusions - in June 2007 Hulamin listed on the
Johannesburg Stock Exchange and subsequently Hulett-
Hydro Extrusions changed its name to Hulamin Extrusions.
« In 2008 Hulamin acquired the Hydro Aluminium
shareholding to become the sole shareholder of Hulamin
Extrusions.
=
=
Contents
How to order 5
The Properties of Aluminium 6
Alloys 7
Technical Grade 11
Manufacturing Limits 11
Dimensions 12
Lengths 12
General 12
Forms of Corrosion 13
Corrosion Resistance in Different Environments 14
Surface Treatment 14
Angles
Type 1 15
Type 2 16
Type 3 16
Type 4 17
Type 5 19
Type 6 20
Type 13 20
Channels
Type 1 21
Type 2 24
Type 3 24
Type 4 25
Type 5 25
Type 7 25
Type 11 26
Extruded Rods 27
Extruded Tubes 28
Flat Bars
Type 1 31
Type 2 33
Type 3 34
Square Bars 35
Hexagonal Bars 35
Rectangular Hollows 36
Rectangular Oval Hollows 38
Square Hollows 39
I - Sections 41
Tees
Type 1 42
Type 2 43
Z - Sections 43
Engineering Data for Structural Shapes 44
Angle
Type 1 44
Type 2 47
Type 3 48
Type 4 49
Type 5 53
Type 6 54
Channel
I - Sections
Tees
Type 1
Type 2
Type 3
Type 4 & 5
55
59
60
61
62
=
Index
Type 1
Type 2
4
=
How to order
Essential information required for entry of enquiries or orders
Complete specifications:
« alloy/condition
« drawing number/die number
« part number where applicable
« lengths
« special tolerances
« finishing requirements - painting and anodising (type, colour and micron thickness of anodising)
whilst the exact finishing and anodising perimeters are shown, the price for painting/anodising might be based on a minimum
finishing perimeter
« fabrication related specification details to ensure material conforms to detailed requirements
Additional information:
« End use: Brief detail on end use of material
« Delivery requirements: State specific delivery requirements
Packing
Unless otherwise specified on the order, normal Hulamin Extrusions packing methods will be used.
Shipping tolerances
Extruded products will, within practical limits, be supplied in the number of pieces ordered. Unless otherwise stated, orders for
production by Hulamin Extrusions will be subject to a mass or piece quantity tolerance of ± 10%.
If over-shipment is not permissible the order shall be endorsed “Do not over-ship mass” (or “Pieces” as is applicable) in which
case an under-shipment of 10% may be supplied.
Supply of an exact number of pieces or other shipping tolerances closer than those stated will be subject to enquiry, and may
incur a price premium.
Other requirements
Orders should be clearly detailed with any special requirements.
Masses
The masses shown for sections in this catalogue are for guidance and may vary slightly according to the alloy and the
dimensional accuracy achieved when produced and within the permissible tolerances.
=
5 April 2015 Hulamin Extrusions Standard Profile Catalogue
=
The Properties of Aluminium
Aluminium has a unique and unbeatable combination of pro- Corrosion resistance
perties that make it a versatile, highly usable and an attractive A thin layer of oxide is formed when exposed to air. This pro-
construction material. vides very good protection against corrosion even in corrosive
environments. This layer can be further strengthened by sur-
Mass 3
face treatments such as anodising or powder coating.
Aluminium is a light metal with a density of 2,700 kg/m , one
3
third that of steel. (8,400 kg/m ) Conductivity
The thermal and electrical conductivities are excellent, even
Strength when compared with copper. Furthermore, an aluminium
Aluminium is strong with a tensile strength between 70 and conductor has only half the weight of an equivalent copper
700 MPa, depending on the alloy and manufacturing process. conductor.
Extrusions of the right alloy and design can be as strong as
structural steel. Thermal Conductivity
Aluminium thermal conductivity is half that of the equivalent
Elasticity sized copper element (8 900 kg/m3), but has a density (2 700
The Young's modulus for aluminium (E=69 000 MPa) is a third kg/m3) of less than a third of that of the copper element. The
that of steel. This means that the moment of inertia has to equivalent aluminium element therefore comes at less than
be three times as great for an aluminium extrusion to achieve half the price and is much easier to handle because of the
the same deflection as a steel profile. light weight.
Joining Reflectivity
Aluminium can be joined using all the normal methods avail- Aluminium is a good reflector of both light and heat.
able such as welding, brazing, adhesive bonding and riveting.
=
Hulamin Extrusions Standard Profile Catalogue April 2015 6
=
Alloys
Technical Information
Alloy Nomenclature
Alloy
Series Main alloying constituent Important:
1xxx Aluminium, 99.0% minimum and greater The four-digit system of alloy nomenclature used by
2xxx Copper Hulamin Extrusions, in common with the Aluminium
3xxx Manganese Federation, uses a block number to indicate the main
4xxx Silicon alloying constituents.
5xxx Magnesium
6xxx Magnesium and Silicon
7xxx Zinc, Magnesium and/or Copper
Alloy Designations
1070A F - All - 60 - 25 23
T4 - 10 90 180 - 15 13
6005A T6 - 5 225 270 - 8 6
SOLID
T6 5 10 215 260 - 8 6
PROFILES
T6 10 80 200 250 - 8 6
T4 - 10 90 180 - - 13
6005A
HOLLOW T6 - 5 215 255 - - 6
PROFILES T6 5 15 200 250 - - 6
O - - - - 150 16 14
6061 T4 - 25 110 180 - 15 13
T6 - 80 240 260 - 8 6
O - 100 - - 130 18 16
T4 - 25 65 120 - 14 12
T5 - 3 130 175 - 8 6
6063
T5 3 25 110 160 - 7 5
T6 - 10 170 215 - 8 6
T6 10 80 160 195 - 8 6
6082
O
F
T4
T6
T6 5
-
-
-
-
100
100
80
5
80
-
-
110
250
260
-
110
205
290
310
160
-
-
-
-
16
13
14
8
8
14
12
12
6
-
=
7 April 2015
=
The choice of material is a critical decision in all product de- sions for windows and doors, lighting, awnings, handrails
velopment. Aluminium makes it possible to give the product and furniture. This material is highly suitable for anodising,
suitable physical and mechanical properties at the same both for decorative and protective reasons.
time as achieving an aesthetically attractive appearance.
The 6005 alloy has higher strength than 6063 but is slightly harder
Furthermore, the extrusion technique, combined with the to extrude. The material withstands comparatively little elon-
gation before there is permanent deformation in the heat
number of application opportunities. It also forms the basis treated condition. This alloy can be exposed to greater inter-
for product improvement. Pure aluminium is only used in a crystalline corrosion than 6063 and 6082, it is suitable for
limited way commercially. The majority of extrusions are anodising for protective purposes but the quality of the surface
made from aluminium alloyed with other metals.
Alloy Compositions.
Percentages
Alloy Others
Si Fe Cu Mn Mg Cr Zn Ti
Each Total
1070A 0,20 0,25 0,03 0,03 0,03 - 0,07 0,03 0,03 -
6005A 0,5-0,9 0,35 0,30 0,50 0,40-0,7 0,30 0,20 0,10 0,05 0,15
6061 0,40-0,8 0,7 0,15-0,40 0,15 0,8-1,2 0,04-0,35 0,25 0,15 0,05 0,15
6063 0,20-0,6 0,35 0,10 0,10 0,45-0,9 0,10 0,10 0,10 0,05 0,15
6082 0,7-1,3 0,50 0,10 0,40-1,0 0,6-1,2 0,25 0,20 0,10 0,05 0,15
The most common elements used are magnesium (Mg), The 6061/6082 alloys have high strength qualities and are
silicon (Si), manganese (Mn), zinc (Zn) and copper (Cu). They suitable for extrusion of cross-sections that are not too com-
form between 0.2 and 0.7 per cent of aluminium alloys. plicated. Typical applications are load carrying structures in
ships, offshore transport, and the building industry such as
Aluminium alloys used for extrusions are generally designated platforms, bridges, stairs, scaffolds and handrails. The
with the following serial numbers: material is suitable for anodising for protective purposes.
1000 series - Al
6000 series - Al + Mg + Si Temperature – mechanical properties
Care should be taken when using aluminium at high tempera-
The 1000 series is not heat treatable. These alloys are often
chosen in products where high thermal and electrical con- at temperatures above 100°C, especially if the material has
ductivity are desired. They have low strength. been thermally hardened or cold worked.
The 6000 series are heat treatable. They are the most com- In general the 6063, 6005, 6061 and 6082 alloys should not be
monly used extrusion alloys and have a wide range of appli- used in structures at temperatures above 100°C. The tensile
cations. strength decreases as the temperature increases while elong-
ation on fracturing usually increases. It should be noted that
The 6000 series has good extrudability and can be solution the characteristics are dependent on alloy, temperature, and
heat treated at the extrusion temperature. Furthermore, time. If the designer is unfamiliar with the exact temperature
these alloys have medium to high strength, are easy to weld characteristics for a given alloy, it can be assumed as a starting
and offer good resistance to corrosion, even in marine en- point that properties such as tension, shear and fatigue
vironments. The bulk of the extruded material for load bear- strength vary in proportion to the tensile strength.
ing constructions is made from these qualities. They are
used for load bearing constructions both on land and at sea. Low temperature properties
In contrast to steel, aluminium alloys do not become brittle
The 6063 alloy offers medium strength and is easy to extrude at low temperatures. In fact aluminium alloys increase in
even for complicated cross sections. This alloy is one of the strength and ductility whilst impact strength remain unchanged.
most used extrusion alloys. It has good formability during As the temperature decreases, below 0°C, the yield strength
bending in the T4 condition. Typical applications are extru- and tensile strength of aluminium alloys increase.
=
Tempers
Temper Description Application
F As fabricated Forging stock: Maximum formability
O Annealed Forging stock: Maximum formability
Formability with higher properties than F or
T4 Solution heat treated and naturally aged
O conditions
Cooled from an elevated shaping process and Where highest mechanical properties are
T5
T6
April 2015
not required by end use (i.e. non-structural)
Where highest mechanical properties are
required
8
=
Summary of Alloys
Hulamin Extrusion Alloys Condition 1070A 6063 6005 6061 6082
O 20 - - - -
F 25 - - - -
Yield strength, (MPa)
T4 - 95 70 145 125
T6 - 225 260 275 290
O 75 - - - -
F 80 - - - -
Tensile strength, (MPa)
T4 - 190 160 220 225
T6 - 250 285 310 315
T4 - 24 22 20 20
Elongation, A5 %
T6 - 10 8 10 10
T4 - 47 47 65 65
Brinell Hardness, HB
T6 - 81 92 100 100
2 -
Density (kg/m ) 2 700 2 700 2 700 2 700 2 710
Young's Modulus (MPa) - 69 000 69 000 69 000 69 000 69 000
Coefficient of expansion
o -6 o - 24 23 23 24 23
20-100 C (x 10 / C)
Thermal conductivity
o - 229 200 200 180 180
20 C (W/mK)
Electrical conductivity % IACS - 62 52 52 46 46
o
Melting Point ( C) - 645-658 600-655 615-655 580-650 580-650
EN-AW 6063A 6005A 6061 6082
Values for the mechanical properties can vary for different process parameters. The values given are typical and can be
guaranteed on the assumption that a special agreement has been reached.
Brinell
45 50 55 60 65 70 75 80 85 90 95 100 105 110
Vickers
46 51 56 61 66 71 76 82 87 92 98 103 109 115
Rockwell ‘F’
36 46 54 61 67 71 76 79 82 85 87 89 91 -
Rockwell ‘E’
47 55 62 68 72 77 80 83 86 88 90 92 94 96
Rockwell ‘B’
- - - - 12 23 32 39 45 50 56 60 63 66
Rockwell ‘K’
Webster
-
5
15
7
25
9
35
10
41
11
48
12 13
Hardness Number
53 58
13-14
62
14-25
66
15
70
15-16
73
16
76
16-17
78
17 =
9 April 2015 Hulamin Extrusions Standard Profile Catalogue
=
Metal Thickness Chart
Definitions
W
1. Flat solid shapes:
Shape to be basically flat.
Thickness to be uniform.
No dovetails or screw receiving slots.
H D 2. Regular solid shapes:
H = 1/3 D W = 3/4 D
3. Medium depth channels:
H = 1/3 D W = 1/2 D
4. Deep solid channels:
H = 1/2 D to 3W
5. Semi-hollow and hollow shapes
mm mm
4.00 4.00
3.80 3.80
3.60 3.60
3.40 3.40
3.20 3.20
(5)
3.00 3.00
es
ap
sh
)
2.80 (3 2.80
low
s
ee
,t
ol
s
dh
le
(4
2.60 g
an
an
ls
2.60
ne
s,
low
l
an
ne
ch
an
ol
2.40
i-h
ch 2.40
lid
th
m
so
p (2)
Se
de es
ep
ap
De
2.20 um h 2.20
e di lids
M r so
2.00 ula (1) 2.00
Re
g p es
sha
lid
1.80 t so 1.80
Fla
1.60 1.60
1.40 1.40
1.20 1.20
=
mm
20
40
60
80
100
120
140
160
180
200
220
240
260
280
D Definition - Harmful defects in the above context refers to «Handling effects (transfer and stretching)
=
areas and lengths. Lengths may also be limited by transport not be expected from the extrusion process. All too often de-
restrictions. Minimum thickness, shape configuration and signers and draughtsman have had experience of machine
complexity of detail may be limited by the extrusion process shop tolerances only and need guidance in the understan-
as well as by press capacity. Manufacturing limits for sections ding of extrusion tolerances or they are likely to specify the
of complicated shape and abnormal design may be narrower tolerances they are most familiar with. This can result in
than stated. The limits given are for sections designed accor- needless communications with producer plants, possibly
ding to accepted extrusion design practice. The maximum obscuring, as a result, very real needs a designer may have
circumscribing circle diameters given on Page 12 are a guide for closer than normal tolerances.
and must not be read as being available at the minimum
thickness shown in the adjacent column. A guide as to this
ratio of circumscribing circle to minimum thickness may be
obtained from the diagram on Page 10. The maximum limits
as dictated by press capacity, are given on Page 12.
11 April 2015
The time to discuss extrusion tolerances is thus at the
design stage rather than after delivery of the product which
may be found to be difficult to use because allowance has
not been made for normal tolerances.
Specified Lengths
Hollow Profiles When a specified length is ordered, all lengths will be cut to
Tube and hollow shapes for the architectural and general specification within the limits of the length tolerance.
engineering markets are produced by the porthole extrusion
process. In this process the seam welds are formed in the
dies during the extrusion process. Although considerable General
tonnages of hollow shapes and tubing are regularly and
successfully extruded and put to good use, it is possible for Products outside the limits outlined below will be subject to
weld soundness to be adversely affected by process factors. enquiry.
In spite of all measures normally taken during extrusion to
achieve sound welds, the weld quality may vary along the
extruded length. Notwithstanding the successful use made
Tubing and Hollow Sections
regularly of hollow shapes and tubing produced by the port- Maximum Limits
hole extrusion method, it is not possible to guarantee such Maximum Wall Thickness 12,0 mm
welds. Drift testing as described in the section of Technical Maximum Mass per Metre 13,0 kg/m
Grade, can be performed and gives a reasonable degree of
assurance of the seam weld quality. However, this test can Minimum Limits
only be carried out on the ends of hollow profiles and tubes. Minimum Tube Wall Thickness 1,2 mm
Where physical injury or danger can result from seam weld Minimum Tube outside Diameter 10,0 mm
=
SOLIDS
=
HOLLOWS
Pitting corrosion Profiles without any surface treatment should never be stored
Pitting corrosion is the most common type of corrosive pheno- outdoors, even though plastic wrapping is used, because of
mena with light alloys, and is characterised by local discon- risk of condensation. Storing should be carried out in places
tinuities in the oxide film, i.e. locally reduced film thickness, with a maximum relative humidity of RH 45 %, and a maxi-
rupture, localised concentrations of impurities/alloying ele- mum temperature variation of ±5°C. During transportation
ments, etc. Aluminium is sensitive to pitting when chloride from a cold to a warmer area, the temperature should be
ions are present (e.g. sea water). Pits develop at weak spots in increased gradually to avoid condensation on the metal.
the surface films and at sites where the oxide film is mechani-
cally damaged. Galvanic corrosion
Galvanic corrosion is the type of corrosion that occurs when
Pitting can penetrate several millimetres during a short period two metallic materials are in contact in the presence of an
of time if the surrounding conditions are extremely unfavour- electrolyte. Corrosion will increase on the least noble material
able. The pits can be of different shapes, wide or narrow. The (the anode) and decrease on the noblest (the cathode). Since
narrow pits can often be dangerous since the pits could be aluminium is less noble than most commonly used construc-
deep and difficult to detect. tion materials, with the exception of zinc, magnesium and
cadmium, this can be a serious form of corrosion with alumi-
The correct choice of alloy and surface treatment e.g. anodis-
ing, powder coating, coating with anodic layer (Zn), cathodic
protection with sacrificial anodes or applied current, or by
use of inhibitors, are methods which can be used to limit or
prevent pitting corrosion. Frequent cleaning, as well as ventila-
tion of dense constructions and a profile design avoiding
accumulation of stagnant water, are recommended.
nium.
Water
Pitting can occur in stagnant water. The composition of the
water is the important factor as the presence of copper, cal-
14
=
Angles Type 1
A T
Type 1 angles have legs of equal length and of equal thickness.
R1
The radii are all less than or equal to 0.80 mm.
A
T
Type 2 angles have legs of equal length and of equal thickness.
R1
The radii are all greater than 0.80 mm.
A
Type 3 R2
A T
Type 3 angles have legs of equal length and of equal thickness.
R1
The inside corner radius is greater than 0.80 mm.
Other radii are less than or equal to 0.80 mm.
A
=
Hulamin Extrusions Standard Profile Catalogue April 2015 16
=
Angles Type 4
A T
Type 4 angles have legs of unequal length but of equal thickness.
R1
The radii are all less than or equal to 0.80 mm.
B
April 2015
0.50
0.40
126
139
52
54
0.519
0.574
April 2015
0.40
0.50
355
270
127
113
2.950
0.721
18
=
Angles Type 4
A T
Type 4 angles have legs of unequal length but of equal thickness.
R1
The radii are all less than or equal to 0.80 mm.
B
Type 5 R2
A T
Type 5 angles have legs of unequal length but of equal thickness.
R1
The radii are all greater than 0.80 mm.
B
=
19 April 2015 Hulamin Extrusions Standard Profile Catalogue
=
Angles Type 6
A
R2
T
Type 6 angles have legs of unequal length but of equal thickness.
R1
The inside corner radius is greater than 0.80 mm.
Other radii are less than or equal to 0.80 mm.
B
Type 13 R2
A T
Type 13 angles have legs of unequal length but of equal thickness.
R1
The inside corner radius and radii on legs may be greater than 0.80 mm.
The external corner radius is greater than 0.80 mm. R3 B
=
Hulamin Extrusions Standard Profile Catalogue April 2015 20
=
Channels Type 1
R1
T1
Type 1 channels are of a uniform thickness with all radii less than or equal to 0.80 mm. A T1
April 2015
0.76
0.40
117
135
34
36
0.475
0.357
Type 1 channels are of a uniform thickness with all radii less than or equal to 0.80 mm. A T1
Type 1 channels are of a uniform thickness with all radii less than or equal to 0.80 mm. A T1
=
23 April 2015 Hulamin Extrusions Standard Profile Catalogue
=
Channels Type 2
R1
T1
Type 3 T1
R2
R1
Type 3 channels may have the web and flanges of different thicknesses. A T2
The two inside corner radii are always greater than 0.80 mm.
All other radii are less than or equal to 0.80 mm.
B
=
Hulamin Extrusions Standard Profile Catalogue April 2015 24
=
Channels Type 4
R1
T1
R2
Type 4 channels may have the web and flanges of different thicknesses. A T2
The radii on both the inside corners of the channel and inside corners
of the legs are greater than 0.80 mm. R3 B
Type 5 T1
R2
R1
Type 5 channels may have the web and flanges of different thicknesses. A T2
The radii on both the inside and outside corners of the channel are greater than 0.80 mm.
The radii of the legs are less than or equal to 0.80 mm. R3 B
Type 7 T3 C
R2
T1
R1
Type 7 channels are sometimes referred to as “top hats”. The web, flanges and legs B R3
may differ in thickness. They usually have a radius on the inside of the angle formed
T2
between the web and flange and between the flange and legs. A
The radii of the legs are less than or equal to 0.80 mm.
=
25 April 2015 Hulamin Extrusions Standard Profile Catalogue
=
Channels Type 11
R1
T1
Type 11 channels are sometimes referred to as “C” sections. The web, flanges and feet may all A R2 C
differ in thickness. They usually have a radius on the inside of the angle formed between the
web and flange and the flange and the feet. Other radii are less than or equal to 0.80 mm.
T2 B
=
Hulamin Extrusions Standard Profile Catalogue April 2015 26
=
Extruded Rods
An extruded rod, or round bar, is a solid which is circular in shape.
=
27 April 2015 Hulamin Extrusions Standard Profile Catalogue
=
Extruded Tubes W.T.
An extruded tube is a hollow of uniform thickness in the shape of a circle.
Anodising Perimeter = Outside perimeter + 1/2 Inside perimeter.
A
Profile Profile Profile O.D. W.T. Anod. Paint C.C.D. Est. Profile Profile Profile O.D. W.T. Anod. Paint C.C.D. Est.
Number Number Number mm mm Peri. Peri. mm kg/m Number Number Number mm mm Peri. Peri. mm kg/m
CET11 6.00 1.50 24 19 6 0.057 OET298 25.00 8.25 92 79 25 1.176
CET8 7.96 1.20* 34 25 8 0.069 PET337 OET207 CET337 25.40 1.10* 116 80 25 0.227
PET401 CET401 8.00 1.00* 35 25 8 0.060 PET1049 OET167 CET297 25.40 1.22* 116 80 25 0.251
OET202 9.52 0.92* 42 30 10 0.067 PET267 OET137 25.40 1.50 115 80 25 0.305
PET296 OET166 CET296 9.52 1.22* 41 30 10 0.086 PET392 OET261 CET392 25.40 1.62 115 80 25 0.328
PET404 CET404 10.00 1.22* 43 31 10 0.091 PET62 OET138 CET62 25.40 2.00 113 80 25 0.398
PET1015 10.00 1.50 42 31 10 0.109 OET227 25.40 2.64 111 80 25 0.511
PET918 CET918 12.00 1.00* 53 38 12 0.094 PET370 OET239 CET370 25.40 3.18 110 80 25 0.601
PET798 CET798 12.00 2.00 50 38 12 0.170 PET455 25.40 4.76 105 80 25 0.836
OET174 12.00 3.50 46 38 12 0.253 PET326 OET196 25.40 5.20 103 80 25 0.894
PET330 OET200 CET330 12.70 1.22* 56 40 13 0.119 PET457 25.40 6.35 100 80 25 1.029
PET386 OET255 CET386 12.70 1.62 55 40 13 0.153 PET469 CET1037 28.00 1.50 127 88 28 0.338
PET406 12.70 2.04 53 40 13 0.185 PET471 28.00 6.55 111 88 28 1.196
PET298 OET168 12.70 2.64 52 40 13 0.226 PET265 OET135 CET60 28.58 1.62 130 90 29 0.372
PET407 12.70 3.25 50 40 13 0.261 CET38 28.58 2.50 127 90 29 0.555
PET408 CET1036 14.00 1.22* 62 44 14 0.133 PET473 28.58 3.98 122 90 29 0.833
PET409 14.00 1.80 60 44 14 0.187 OET251 30.00 1.15* 138 94 30 0.282
OET307 15.00 1.50 66 47 15 0.172 PET478 CET478 30.00 1.50 137 94 30 0.364
PET412 15.00 2.00 64 47 15 0.221 PET479 CET479 30.00 2.00 135 94 30 0.477
PET372 OET241 CET372 15.88 1.22* 71 50 16 0.152 PET282 OET152 30.00 2.50 134 94 30 0.585
PET312 OET182 CET312 15.88 1.62 70 50 16 0.197 PET481 CET481 30.00 3.00 132 94 30 0.689
PET340 OET210 15.88 2.00 69 50 16 0.236 PET482 30.00 4.00 129 94 30 0.885
OET160 15.88 3.18 65 50 16 0.344 PET327 OET197 30.00 5.00 126 94 30 1.064
PET414 16.00 1.20* 72 50 16 0.151 PET1059 OET297 30.00 8.00 116 94 30 1.498
PET366 OET235 16.00 1.50 71 50 16 0.185 OET248 31.75 1.40* 145 100 32 0.362
PET238 OET238 16.00 2.00 69 50 16 0.238 CET1000 31.75 1.62 145 100 32 0.415
PET415 16.00 2.75 67 50 16 0.310 PET275 CET275 31.75 3.18 140 100 32 0.773
PET416 16.00 4.00 63 50 16 0.408 PET487 31.75 6.35 130 100 32 1.373
OET275 CET25 18.00 1.22* 81 57 18 0.174 PET299 OET169 CET299 32.00 1.50 146 101 32 0.389
CET14 18.00 1.75 79 57 18 0.242 PET492 CET492 32.00 2.00 145 101 32 0.511
OET217 19.00 1.50 85 60 19 0.223 PET20 CET20 32.00 2.50 143 101 32 0.628
CET1015 19.00 3.20 79 60 19 0.430 PET1024 OET208 32.00 3.00 141 101 32 0.740
PET374 OET243 CET374 19.06 1.22* 86 60 19 0.185 CET1043 32.00 4.25 137 101 32 1.004
PET349 OET219 CET349 19.06 1.62 85 60 19 0.240 PET493 32.00 6.00 132 101 32 1.328
PET425 CET1022 19.06 2.00 84 60 19 0.290 PET893 35.00 1.35* 161 110 35 0.387
PET293 OET163 CET293 19.06 3.18 80 60 19 0.430 PET504 35.00 1.60 160 110 35 0.455
OET178 19.06 4.53 76 60 19 0.560 PET378 OET247 CET378 35.00 2.00 159 110 35 0.562
PET427 CET427 20.00 1.20* 90 63 20 0.192 PET968 CET1011 35.00 3.00 156 110 35 0.817
PET429 OET295 CET429 20.00 2.00 88 63 20 0.306 PET380 OET249 CET380 38.10 1.22* 175 120 38 0.383
PET381 OET250 CET381 20.00 3.00 85 63 20 0.434 PET272 OET142 CET272 38.10 1.50 175 120 38 0.467
PET430 20.00 6.00 75 63 20 0.715 PET273 OET143 CET273 38.10 1.62 174 120 38 0.503
PET438 CET438 22.00 1.50 99 69 22 0.262 PET335 OET205 38.10 2.02 173 120 38 0.620
CET1017 22.00 2.00 97 69 22 0.340 CET295 38.10 3.18 170 120 38 0.945
PET362 OET231 CET362 22.00 2.50 96 69 22 0.415 PET517 CET517 38.10 4.06 167 120 38 1.176
CET53 22.00 6.60 83 69 22 0.865 PET1042 38.10 5.95 161 120 38 1.628
PET351
PET288
PET439
PET1055
PET448
PET325
OET220
OET158
OET263
OET195
CET351
CET288
CET23
CET999
22.22 1.22*
22.22 1.62
22.22 2.74
22.22 3.18
25.00 1.20*
CET1012 25.00 1.62
25.00 2.00
101
100
96
95
114
113
112
70
70
70
70
79
79
79
22
22
22
22
25
25
25
0.218
0.284
0.454
0.515
0.243
0.322
0.391
PET519
PET525
PET526
PET527
PET371
PET528
PET301
OET240
OET171
CET371
CET528
38.10 6.36
40.00 1.65
40.00 2.00
CET1033 40.00 2.50
40.00 3.00
40.00 3.18
40.00 4.00
160
183
182
181
179
179
176
120
126
126
126
126
126
126
38
40
40
40
40
40
40
1.718
0.538
0.647
0.798
0.945
0.996
1.225
=
PET341
PET450
OET211
April 2015
PET356 OET225
CET50
40.00 5.00
42.00 2.50
173
190
126
132
40
42
1.489
0.840
28
=
Extruded Tubes W.T.
An extruded tube is a hollow of uniform thickness in the shape of a circle.
Anodising Perimeter = Outside perimeter + 1/2 Inside perimeter.
A
Profile Profile Profile O.D. W.T. Anod. Paint C.C.D. Est. Profile Profile Profile O.D. W.T. Anod. Paint C.C.D. Est.
Number Number Number mm mm Peri. Peri. mm kg/m Number Number Number mm mm Peri. Peri. mm kg/m
PET860 CET860 44.45 1.62 204 140 44 0.590 PET303 OET173 CET303 60.00 5.00 267 188 60 2.340
PET541 44.45 6.35 190 140 44 2.059 PET609 60.85 9.80 256 191 61 4.257
PET542 44.46 1.28* 205 140 44 0.470 PET610 63.50 1.62 294 199 64 0.853
PET280 OET150 CET280 44.46 3.18 200 140 44 1.117 PET612 63.50 2.50 291 199 64 1.298
PET320 OET190 45.00 2.00 206 141 45 0.732 PET346 OET216 CET346 63.50 3.18 289 199 64 1.632
PET547 CET547 45.00 2.50 204 141 45 0.904 PET617 63.50 6.36 279 199 64 3.093
PET548 45.00 3.00 203 141 45 1.072 PET1035 63.60 13.48 257 200 64 5.750
PET549 45.00 5.00 196 141 45 1.702 PET350 63.60 16.08 249 200 64 6.503
PET550 45.00 5.50 195 141 45 1.849 PET619 65.00 1.68 301 204 65 0.905
OET198 46.00 3.00 207 145 46 1.098 PET914 65.00 3.70 295 204 65 1.930
PET554 46.45 8.88 191 146 46 2.839 PET1034 67.00 2.50 308 210 67 1.372
PET555 46.45 9.63 189 146 46 3.017 PET1011 68.00 9.38 291 214 68 4.679
PET398 46.45 10.88 185 146 46 3.293 PET622 68.00 10.30 288 214 68 5.058
CET18 46.70 4.01 207 147 47 1.457 PET274 OET144 CET1018 70.00 1.27* 326 220 70 0.743
OET270 CET49 46.70 5.08 204 147 47 1.799 PET1012 70.00 2.25 323 220 70 1.297
OET303 48.00 2.50 218 151 48 0.968 PET625 70.00 5.00 314 220 70 2.766
PET819 48.00 3.00 217 151 48 1.149 PET317 OET187 73.00 7.00 322 229 73 3.932
PET901 48.00 4.50 212 151 48 1.666 CET22 75.00 1.20* 350 236 75 0.754
OET176 49.00 4.50 217 154 49 1.704 OET151 75.00 2.50 346 236 75 1.542
CET36 50.00 1.00* 232 157 50 0.417 PET313 OET183 75.00 5.00 338 236 75 2.979
CET1047 50.00 1.20* 232 157 50 0.498 PET321 OET191 76.20 1.05* 356 239 76 0.672
PET568 CET568 50.00 1.50 231 157 50 0.619 PET389 OET258 CET389 76.20 1.27 355 239 76 0.810
PET348 OET218 50.00 2.00 229 157 50 0.817 PET634 CET634 76.20 1.62 354 239 76 1.028
PET286 OET156 50.00 2.50 228 157 50 1.011 CET21 76.20 2.00 353 239 76 1.263
PET569 CET569 50.00 3.00 226 157 50 1.200 CET1007 76.20 2.50 351 239 76 1.568
PET375 OET244 50.00 3.50 225 157 50 1.385 PET391 CET391 76.20 3.18 349 239 76 1.976
PET571 CET571 50.00 5.00 220 157 50 1.915 PET635 OET260 76.20 3.25 349 239 76 2.018
PET572 50.00 10.00 204 157 50 3.404 PET969 76.20 4.76 344 239 76 2.894
PET307 OET177 50.80 1.05* 236 160 51 0.445 PET639 76.20 5.40 342 239 76 3.254
PET1045 CET52 50.80 1.22* 236 160 51 0.515 PET640 CET640 76.20 6.36 339 239 76 3.780
PET360 OET229 CET360 50.80 1.27* 235 160 51 0.535 PET644 76.20 9.53 329 239 76 5.407
PET315 OET185 CET315 50.80 1.62 234 160 51 0.678 PET645 76.20 11.35 323 239 76 6.264
PET342 OET212 CET342 50.80 2.04 233 160 51 0.846 PET653 80.00 1.68 372 251 80 1.120
PET574 OET318 50.80 2.54 231 160 51 1.043 PET319 OET189 CET319 80.00 3.00 368 251 80 1.966
PET352 OET221 CET352 50.80 3.18 229 160 51 1.289 PET654 80.00 4.00 364 251 80 2.587
PET575 CET575 50.80 3.25 229 160 51 1.315 PET656 CET656 80.00 5.00 361 251 80 3.191
PET577 50.80 4.06 227 160 51 1.615 PET657 80.00 6.00 358 251 80 3.778
PET578 50.80 4.78 224 160 51 1.872 PET658 80.00 8.00 352 251 80 4.902
PET580 CET580 50.80 6.36 219 160 51 2.405 PET659 80.00 10.00 346 251 80 5.957
PET581 50.80 8.23 214 160 51 2.981 PET661 80.00 15.00 330 251 80 8.297
PET582 50.80 9.53 209 160 51 3.347 PET865 83.00 3.18 381 261 83 2.160
PET584 51.00 1.60 235 160 51 0.673 PET668 85.00 11.00 366 267 85 6.927
PET585 CET585 52.00 3.00 236 163 52 1.251 OET319 CET1016 86.00 4.20 392 270 86 2.924
PET820 55.00 7.25 236 173 55 2.946 PET670 86.00 18.38 348 270 86 10.577
PET590 56.00 3.00 254 176 56 1.353 PET671 87.00 8.50 383 273 87 5.678
PET597
PET1001
PET1048
PET599
PET600
PET601
58.00 6.00
58.00 8.50
58.00 12.00
CET1013 60.00 1.20*
CET599 60.00 1.68
CET1003 60.00 2.00
CET1009 60.00 2.50
254
247
236
279
277
276
275
182
182
182
188
188
188
188
58
58
58
60
60
60
60
2.655
3.581
4.698
0.600
0.834
0.987
1.223
PET681
PET987
PET840
PET684
PET1058
PET1005
CET37 89.00 2.00
90.00 1.68
90.00 6.00
90.00 7.12
90.00 10.00
CET1035 96.00 3.00
96.00 18.00
413
419
405
402
393
443
396
280
283
283
283
283
302
302
89
90
90
90
90
96
96
1.481
1.263
4.289
5.022
6.808
2.374
11.948
=
PET283
PET864
OET304
29
60.00 3.00
60.00 3.60
273
271
188
188
60
60
1.455
1.728
April 2015
PET688
PET690
CET1020 97.00 3.50
100.00 2.00
446
465
305
314
97
100
2.785
1.668
Profile Profile Profile O.D. W.T. Anod. Paint C.C.D. Est. Profile Profile Profile O.D. W.T. Anod. Paint C.C.D. Est.
Number Number Number mm mm Peri. Peri. mm kg/m Number Number Number mm mm Peri. Peri. mm kg/m
PET693 100.00 4.00 459 314 100 3.268 PET736 127.00 3.18 588 399 127 3.351
PET694 100.00 5.00 456 314 100 4.042 PET737 127.00 3.50 587 399 127 3.678
PET697 100.00 10.00 440 314 100 7.659 PET739 127.00 5.00 583 399 127 5.191
PET698 100.00 12.00 434 314 100 8.987 PET740 127.00 6.36 578 399 127 6.529
PET699 100.00 15.00 424 314 100 10.850 PET741 130.00 10.00 581 408 130 10.212
OET254 CET385 101.60 1.27* 475 319 102 1.084 PET743 133.00 4.00 614 418 133 4.391
PET311 OET316 CET311 101.60 1.62 474 319 102 1.378 PET935 138.00 2.25 643 434 138 2.599
PET700 OET181 101.60 1.82 473 319 102 1.545 PET745 138.00 3.00 641 434 138 3.447
PET701 101.60 2.64 470 319 102 2.223 PET943 140.00 8.00 635 440 140 8.987
PET1016 OET203 CET333 101.60 3.18 469 319 102 2.663 PET751 150.00 3.00 697 471 150 3.753
PET702 101.60 3.26 469 319 102 2.728 PET752 150.00 5.00 691 471 150 6.170
PET703 CET703 101.60 3.66 467 319 102 3.050 PET754 150.00 8.00 682 471 150 9.667
PET704 101.60 4.76 464 319 102 3.923 PET755 150.00 10.00 675 471 150 11.914
PET706 CET706 101.60 6.36 459 319 102 5.155 PET757 152.40 2.00 712 479 152 2.560
PET715 110.00 2.00 512 346 110 1.838 PET758 152.40 2.50 710 479 152 3.189
PET716 110.00 5.00 503 346 110 4.468 PET760 152.40 3.25 708 479 152 4.125
PET957 112.00 3.50 517 352 112 3.232 PET761 152.40 5.00 702 479 152 6.272
PET849 112.00 7.75 503 352 112 6.876 PET762 152.40 6.36 698 479 152 7.904
PET1019 114.00 19.00 478 358 114 15.361 PET899 158.00 4.00 732 496 158 5.242
PET717 114.30 3.18 529 359 114 3.007 PET765 160.00 4.00 741 503 160 5.310
PET721 114.30 6.36 519 359 114 5.842 PET766 160.00 5.00 738 503 160 6.595
PET813 115.00 10.00 511 361 115 8.936 PET767 160.00 6.00 735 503 160 7.863
PET724 120.00 4.00 553 377 120 3.949 PET768 160.00 10.00 723 503 160 12.765
PET727 120.00 8.00 540 377 120 7.625 PET770 162.00 2.20 756 509 162 2.992
PET728 120.00 10.00 534 377 120 9.361 PET771 162.00 3.50 752 509 162 4.721
PET795 120.00 15.00 518 377 120 13.403 PET345 OET215 169.28 3.70 786 532 169 5.214
PET734 125.00 2.50 581 393 125 2.606 PET778 169.60 4.85 784 533 170 6.800
PET735 OET299 127.00 1.50 594 399 127 1.602 PET861 169.60 11.30 764 533 170 15.223
=
Hulamin Extrusions Standard Profile Catalogue April 2015 30
=
Flat Bars Type 1
A
R1
April 2015
101608
10578
45.00
50.00
33.50
3.00
0.50
0.40
156
105
56
51
4.085
0.406
April 2015
10094
10095
127.00
127.00
6.35
9.53
0.76
0.64
267
273
127
127
2.187
3.281
32
=
Flat Bars Type 1
A
R1
Type 2 R1
R2
Type 2 flat bars have radii of more than 0.80 mm on the top corners. A
T
The other two corners have radii of less than or equal to 0.80 mm.
=
33 April 2015 Hulamin Extrusions Standard Profile Catalogue
=
Flat Bars Type 3
A
R1
R2
Type 3 flat bars have radius so that the sum of the two side radii must T
equal the thickness of the bar.
=
Hulamin Extrusions Standard Profile Catalogue April 2015 34
=
Square Bars
A square bar is a solid with all four sides equal in length.
It is identified by the size measurement across the flats.
R
A
Hexagonal Bars R
=
35 April 2015 Hulamin Extrusions Standard Profile Catalogue
=
Rectangular Hollows B
R1
R2
T
April 2015
0.78
0.80
223
251
154
175
61
65
0.813
1.336
36
=
Rectangular Hollows B
R1
R2
T
April 2015
0.40
0.40
493
587
339
399
130
144
3.512
3.154
=
Hulamin Extrusions Standard Profile Catalogue April 2015 38
=
Square Hollows R1
R2
April 2015
277
291
188
199
71
71
0.744
1.041
=
Hulamin Extrusions Standard Profile Catalogue April 2015 40
=
I - Sections T2
R2 R1
I - sections may have web and flanges of different thicknesses. A
T1
=
41 April 2015 Hulamin Extrusions Standard Profile Catalogue
=
Tees Type 1
R1
A
=
Hulamin Extrusions Standard Profile Catalogue April 2015 42
=
Tees Type 2 A
Z - Sections B
Z-sections are profiles in the shape of a “Z” with a uniform thickness throughout. T2
T1 A
The radii are all less than or equal to 0.80 mm.
=
43 April 2015 Hulamin Extrusions Standard Profile Catalogue
=
Type 1 T 2
Cy y
Angle 1
Type 1 angles have legs of equal length and of equal thickness.
The radii are all less than or equal to 0.80 mm.
A T
o x x
90 Cx
1
A 2
y
Torsion
Dimensions Centroid X-X Axis Y-Y Axis Principal Axis Constant
Profile
A T r1 Mass Area Cy Cx Ix Zx Rx Iy Zy Ry I1 Z1 r1 I2 Z2 r2 Angle J
Number 2 4
April 2015
15529 30.00 3.00 0.76 0.462 171.0 8.6 8.6 14.6 681 9.2 14.6 681 9.2 23.2 1094 11.7 5.9 489 5.9 45.0 513
15861 30.00 4.00 0.40 0.607 224.0 9.0 9.0 18.6 882 9.1 18.6 882 9.1 29.4 1387 11.5 7.7 607 5.9 45.0 1195
15901 30.00 5.00 0.40 0.745 275.0 9.3 9.3 22.2 1072 9.0 22.2 1072 9.0 34.9 1647 11.3 9.4 712 5.8 45.0 2292
15708 31.75 1.60 0.20 0.268 99.0 8.5 8.5 9.9 426 10.0 9.9 426 10.0 15.8 705 12.6 4.0 330 6.3 45.0 85
Engineering Data for Structural Shapes
15826 31.75 3.18 0.40 0.517 191.8 9.1 9.1 18.3 809 9.8 18.3 809 9.8 29.2 1299 12.3 7.5 580 6.2 45.0 647
15555 31.75 4.76 0.40 0.757 279.6 9.7 9.7 25.6 1159 9.6 25.6 1159 9.6 40.5 1802 12.0 10.7 783 6.2 45.0 2112
15163 31.76 6.36 0.40 0.985 363.5 10.2 10.2 32.0 1487 9.4 32.0 1487 9.4 50.1 2231 11.7 13.9 960 6.2 45.0 4902
15540 35.00 3.00 0.50 0.544 201.0 9.9 9.9 23.6 940 10.8 23.6 940 10.8 37.7 1522 13.7 9.6 688 6.9 45.0 603
15970 38.00 3.00 0.40 0.593 219.0 10.6 10.6 30.5 1115 11.8 30.5 1115 11.8 48.7 1813 14.9 12.4 824 7.5 45.0 657
15972 38.00 6.00 0.40 1.138 420.0 11.7 11.7 54.7 2079 11.4 54.7 2079 11.4 86.4 3215 14.3 23.0 1392 7.4 45.0 5040
15164 38.10 1.14 0.55 0.231 85.6 10.0 10.0 12.6 446 12.1 12.6 446 12.1 20.1 746 15.3 5.0 358 7.7 45.0 37
150007 38.10 1.60 0.40 0.323 119.4 10.1 10.1 17.3 619 12.0 17.3 619 12.0 27.7 1028 15.2 7.0 486 7.6 45.0 102
15291 38.10 2.04 0.76 0.409 151.3 10.3 10.3 21.7 781 12.0 21.7 781 12.0 34.7 1288 15.1 8.7 600 7.6 45.0 210
15827 38.10 3.18 0.40 0.629 232.2 10.7 10.7 32.4 1183 11.8 32.4 1183 11.8 51.7 1918 14.9 13.1 868 7.5 45.0 783
15828 38.10 4.78 0.40 0.925 341.4 11.3 11.3 45.9 1712 11.6 45.9 1712 11.6 72.9 2705 14.6 19.0 1188 7.5 45.0 2600
15170 38.10 6.35 0.40 1.202 443.5 11.8 11.8 57.7 2195 11.4 57.7 2195 11.4 90.9 3375 14.3 24.4 1458 7.4 45.0 5962
15862 40.00 2.00 0.40 0.422 156.0 10.7 10.7 24.8 846 12.6 24.8 846 12.6 39.6 1399 15.9 10.0 655 8.0 45.0 208
15879 40.00 3.00 0.40 0.626 231.0 11.1 11.1 35.8 1240 12.5 35.8 1240 12.5 57.2 2021 15.7 14.5 922 7.9 45.0 693
15557 40.00 4.00 0.40 0.824 304.0 11.5 11.5 46.1 1615 12.3 46.1 1615 12.3 73.4 2594 15.5 18.8 1158 7.9 45.0 1621
44
=
=
Type 1 T Cy y
45
2
Angle 1
Type 1 angles have legs of equal length and of equal thickness.
The radii are all less than or equal to 0.80 mm.
A T
o x x
90 Cx
1
A 2
y
Torsion
Dimensions Centroid X-X Axis Y-Y Axis Principal Axis Constant
Profile
A T r1 Mass Area Cy Cx Ix Zx Rx Iy Zy Ry I1 Z1 r1 I2 Z2 r2 Angle J
Number 2 3 4 3 3 4 3 3 4 3 3 4 3 4
mm mm mm kg/m mm mm mm x10 mm mm mm x10 mm mm mm x10 mm mm mm x10 mm mm mm deg mm
15532 40.00 5.00 0.76 1.015 375.0 11.8 11.8 55.6 1974 12.2 55.6 1974 12.2 88.3 3121 15.3 22.9 1371 7.8 45.0 3125
15373 40.00 6.00 0.40 1.203 444.0 12.2 12.2 64.5 2319 12.1 64.5 2319 12.1 102.0 3605 15.2 27.0 1566 7.8 45.0 5328
150014 44.45 4.76 0.40 1.085 400.5 12.9 12.9 74.5 2359 13.6 74.5 2359 13.6 118.5 3771 17.2 30.5 1675 8.7 45.0 3025
15913 45.00 4.00 0.40 0.932 344.0 12.7 12.7 66.7 2065 13.9 66.7 2065 13.9 106.2 3339 17.6 27.1 1504 8.9 45.0 1835
15733 50.00 3.00 0.50 0.789 291.0 13.6 13.6 71.5 1965 15.7 71.5 1965 15.7 114.2 3230 19.8 28.8 1496 9.9 45.0 873
15906 50.00 4.00 0.40 1.040 384.0 14.0 14.0 92.6 2571 15.5 92.6 2571 15.5 147.7 4178 19.6 37.5 1897 9.9 45.0 2048
15973 50.00 4.50 0.60 1.164 429.8 14.2 14.2 102.7 2866 15.5 102.7 2866 15.5 163.7 4629 19.5 41.7 2084 9.9 45.0 2901
15533 50.00 5.00 0.75 1.286 475.0 14.3 14.3 112.5 3155 15.4 112.5 3155 15.4 179.1 5066 19.4 45.9 2263 9.8 45.0 3958
15854 50.00 6.00 0.40 1.528 564.0 14.7 14.7 131.3 3719 15.3 131.3 3719 15.3 208.5 5897 19.2 54.0 2598 9.8 45.0 6768
15993 50.80 1.59 0.40 0.431 159.0 13.3 13.3 41.4 1105 16.1 41.4 1105 16.1 66.3 1845 20.4 16.6 884 10.2 45.0 134
15829 50.80 3.18 0.40 0.848 313.0 13.9 13.9 79.2 2145 15.9 79.2 2145 15.9 126.5 3520 20.1 31.9 1626 10.1 45.0 1055
15830 50.80 4.76 0.40 1.254 461.0 14.5 14.5 113.3 3118 15.7 113.3 3118 15.7 180.6 5026 19.8 46.1 2256 10.0 45.0 3481
April 2015
15831 50.80 6.35 0.40 1.639 604.8 15.0 15.0 144.7 4044 15.5 144.7 4044 15.5 229.7 6393 19.5 59.7 2809 9.9 45.0 8130
15174 50.80 9.52 0.76 2.374 876.6 16.1 16.1 199.3 5752 15.1 199.3 5752 15.1 313.0 8713 18.9 85.7 3752 9.9 45.0 26482
150000 60.00 2.00 0.40 0.639 236.0 15.7 15.7 85.6 1935 19.0 85.6 1935 19.0 137.0 3228 24.1 34.3 1542 12.1 45.0 315
15880 60.00 3.00 0.40 0.951 351.0 16.1 16.1 125.4 2856 18.9 125.4 2856 18.9 200.3 4722 23.9 50.4 2211 12.0 45.0 1053
15572 60.00 4.00 0.40 1.257 464.0 16.5 16.5 163.1 3749 18.8 163.1 3749 18.8 260.5 6139 23.7 65.8 2823 11.9 45.0 2475
15872 60.00 6.00 0.40 1.853 684.0 17.2 17.2 233.3 5452 18.5 233.3 5452 18.5 371.4 8754 23.3 95.2 3910 11.8 45.0 8208
15207 63.50 3.18 0.64 1.068 393.7 17.1 17.1 157.5 3391 20.0 157.5 3391 20.0 251.7 5606 25.3 63.3 2624 12.7 45.0 1327
15206 63.50 4.78 0.64 1.580 584.2 17.6 17.6 228.2 4977 19.8 228.2 4977 19.8 364.2 8111 25.0 92.3 3699 12.6 45.0 4449
15176 63.50 6.36 0.40 2.080 767.3 18.2 18.2 293.1 6472 19.5 293.1 6472 19.5 466.6 10391 24.7 119.6 4640 12.5 45.0 10345
15363 64.00 8.00 0.76 2.600 960.0 18.9 18.9 364.5 8087 19.5 364.5 8087 19.5 578.6 12784 24.5 150.4 5617 12.5 45.0 20480
15907 70.00 6.00 0.40 2.178 804.0 19.7 19.7 378.1 7519 21.7 378.1 7519 21.7 602.7 12177 27.4 153.4 5501 13.8 45.0 9648
15485 75.00 3.00 0.50 1.194 441.0 19.9 19.9 248.5 4506 23.7 248.5 4506 23.7 397.2 7490 30.0 99.7 3548 15.0 45.0 1323
15980 75.00 6.00 0.40 2.340 864.0 21.0 21.0 468.8 8677 23.3 468.8 8677 23.3 747.8 14101 29.4 189.9 6403 14.8 45.0 10368
15735 76.00 2.00 0.50 0.813 300.0 19.7 19.7 175.9 3126 24.2 175.9 3126 24.2 281.3 5234 30.6 70.4 2522 15.3 45.0 400
15420 76.00 4.00 0.64 1.604 592.0 20.5 20.5 338.4 6095 23.9 338.4 6095 23.9 540.7 10061 30.2 136.1 4696 15.2 45.0 3157
15832 76.20 3.18 0.40 1.286 474.5 20.2 20.2 275.5 4923 24.1 275.5 4923 24.1 440.4 8174 30.5 110.6 3864 15.3 45.0 1600
15833 76.20 4.78 0.40 1.912 705.6 20.8 20.8 401.6 7252 23.9 401.6 7252 23.9 641.4 11903 30.1 161.9 5496 15.1 45.0 5374
15834 76.20 6.35 0.40 2.513 927.4 21.4 21.4 517.9 9450 23.6 517.9 9450 23.6 825.8 15327 29.8 210.0 6939 15.0 45.0 12465
15210 76.20 9.52 0.40 3.686 1360.2 22.5 22.5 732.1 13644 23.2 732.1 13644 23.2 1162.2 21569 29.2 302.1 9476 14.9 45.0 41092
Torsion
Dimensions Centroid X-X Axis Y-Y Axis Principal Axis Constant
Profile
A T r1 Mass Area Cy Cx Ix Zx Rx Iy Zy Ry I1 Z1 r1 I2 Z2 r2 Angle J
Number 2 4
April 2015
46
=
=
Type 2 T Cy y
47
2
Angle R2 1
Type 2 angles have legs of equal length and of equal thickness.
The radii are all greater than 0.80 mm. o
A 90 T
x x
R1 R2
Cx
1
A
y 2
Torsion
Dimensions Centroid X-X Axis Y-Y Axis Principal Axis Constant
Profile
A T r1 r2 Mass Area Cy Cx Ix Zx Rx Iy Zy Ry I1 Z1 r1 I2 Z2 r2 Angle J
Number 2 3 4 3 3 4 3 3 4 3 3 4 3 4
mm mm mm mm kg/m mm mm mm x10 mm mm mm x10 mm mm mm x10 mm mm mm x10 mm mm mm deg mm
15949 50.00 5.00 1.20 1.20 1.260 474.7 14.3 14.3 112.1 3142 15.4 112.1 3142 15.4 173.7 4914 19.1 50.5 2493 10.3 45.0 3958
15545 50.80 3.18 6.35 3.18 0.860 317.3 13.5 13.5 76.8 2057 15.6 76.8 2057 15.6 115.4 3213 19.1 38.2 2005 11.0 45.0 1055
15546 50.80 4.76 6.35 3.18 1.260 465.3 14.2 14.2 111.0 3030 15.4 111.0 3030 15.4 165.6 4611 18.9 56.3 2806 11.0 45.0 3481
15547 50.80 6.35 6.35 3.18 1.650 609.2 14.8 14.8 142.3 3957 15.3 142.3 3957 15.3 211.1 5876 18.6 73.5 3505 11.0 45.0 8130
15543 76.20 6.35 7.93 6.35 2.503 923.6 20.9 20.9 493.5 8917 23.1 493.5 8917 23.1 726.8 13488 28.1 260.2 8822 16.8 45.0 12465
15544 76.20 9.53 7.93 6.35 3.679 1357.7 22.2 22.2 709.4 13135 22.9 709.4 13135 22.9 1032.4 19160 27.6 386.4 12311 16.9 45.0 41219
15135 101.60 6.36 9.52 6.36 3.399 1254.0 27.1 27.1 1224.1 16435 31.2 1224.1 16435 31.2 1841.9 25638 38.3 606.4 15812 22.0 45.0 16880
15813 101.60 9.53 9.53 6.35 5.007 1847.9 28.5 28.5 1773.4 24259 31.0 1773.4 24259 31.0 2648.7 36868 37.9 898.1 22286 22.0 45.0 55875
April 2015
Hulamin Extrusions Standard Profile Catalogue
=
=
Type 3 T Cy y
2
Angle R2 1
Type 3 angles have legs of equal length and of equal thickness.
The inside corner radius is greater than 0.80 mm. o
A 90 T
Other radii are less than or equal to 0.80 mm. x x
R1 R2 Cx
1
A
y 2
Torsion
Dimensions Centroid X-X Axis Y-Y Axis Principal Axis Constant
Profile
A T r1 r2 Mass Area Cy Cx Ix Zx Rx Iy Zy Ry I1 Z1 r1 I2 Z2 r2 Angle J
Number 2 4
April 2015
15127 88.90 9.52 8.38 0.64 4.381 1616.9 25.6 25.6 1194.8 18872 27.2 1194.8 18872 27.2 1895.9 30159 34.2 493.7 13641 17.5 45.0 48397
15128 88.90 12.70 8.38 0.64 5.722 2111.7 26.8 26.8 1515.0 24387 26.8 1515.0 24387 26.8 2395.1 38101 33.7 634.9 16768 17.3 45.0 112729
15130 101.60 9.52 9.14 0.64 5.044 1861.6 28.7 28.7 1818.3 24957 31.3 1818.3 24957 31.3 2888.3 40203 39.4 748.4 18413 20.1 45.0 55702
15132 127.00 9.52 10.66 0.76 6.372 2351.6 35.0 35.0 3650.4 39690 39.4 3650.4 39690 39.4 5803.7 64627 49.7 1497.1 30222 25.2 45.0 70313
15294 127.00 12.70 6.36 0.76 8.327 3072.9 36.4 36.4 4686.0 51701 39.1 4686.0 51701 39.1 7453.7 83001 49.3 1918.2 37301 25.0 45.0 164758
15286 152.40 9.52 12.18 0.76 7.703 2842.7 41.3 41.3 6427.3 57851 47.6 6427.3 57851 47.6 10220.9 94846 60.0 2633.6 45092 30.4 45.0 84923
15287 152.40 12.70 12.18 0.76 10.138 3741.3 42.6 42.6 8308.7 75642 47.1 8308.7 75642 47.1 13211.2 122595 59.4 3406.3 56596 30.2 45.0 199444
48
=
=
Type 4 T 2
Cy y
49
Angle Type 4 angles have legs of unequal length but of equal thickness. 1
The radii are all less than or equal to 0.80 mm.
A T
o x x
90 Cx 1
B y 2
Torsion
Dimensions Centroid X-X Axis Y-Y Axis Principal Axis Constant
Profile
A B T r1 Mass Area Cy Cx Ix Zx Rx Iy Zy Ry I1 Z1 r1 I2 Z2 r2 Angle J
Number 2 3 4 3 3 4 3 3 4 3 3 4 3 4
mm mm mm mm kg/m mm mm mm x10 mm mm mm x10 mm mm mm x10 mm mm mm x10 mm mm mm deg mm
150027 25.00 10.30 1.30 0.50 0.119 44.2 2.0 9.4 2.9 186 8.1 0.3 38 2.7 3.0 188 8.2 0.2 31 2.2 11.0 25
15347 25.00 12.50 1.50 0.30 0.146 54.0 2.7 8.9 3.5 220 8.1 0.6 63 3.4 3.8 224 8.4 0.4 50 2.7 15.0 41
15928 25.00 15.00 2.00 0.40 0.206 76.0 3.6 8.6 4.9 297 8.0 1.3 118 4.2 5.4 306 8.4 0.8 89 3.3 19.9 101
15985 25.00 20.00 3.00 0.40 0.341 126.0 5.5 8.0 7.6 450 7.8 4.3 299 5.9 9.7 476 8.8 2.2 199 4.2 31.8 378
15241 25.40 12.70 1.60 0.64 0.157 58.4 2.7 9.1 3.9 242 8.2 0.7 69 3.4 4.2 246 8.5 0.4 55 2.7 14.9 50
15050 25.40 12.70 3.18 0.20 0.301 111.0 3.3 9.7 7.1 453 8.0 1.2 126 3.3 7.5 453 8.2 0.8 103 2.7 13.8 374
15051 25.40 15.88 1.60 0.64 0.171 63.5 3.7 8.4 4.3 251 8.2 1.3 108 4.6 4.8 261 8.7 0.8 81 3.5 21.6 54
15264 25.40 15.88 3.18 0.64 0.329 121.2 4.2 9.0 7.7 471 8.0 2.3 198 4.4 8.6 479 8.4 1.4 150 3.4 20.6 408
15731 30.00 10.00 2.00 0.25 0.206 76.0 2.1 12.1 7.0 390 9.6 0.4 53 2.4 7.1 390 9.7 0.3 46 2.0 7.5 101
15567 30.00 15.00 2.00 0.40 0.233 86.0 3.3 10.8 8.1 420 9.7 1.4 120 4.0 8.6 427 10.0 0.9 96 3.2 14.9 115
15558 30.00 15.00 3.00 0.40 0.341 126.0 3.6 11.1 11.5 610 9.6 1.9 171 3.9 12.2 615 9.8 1.3 138 3.2 14.3 378
15875 30.00 20.00 2.00 0.40 0.259 96.0 4.8 9.8 8.9 441 9.6 3.2 213 5.8 10.3 462 10.4 1.8 156 4.4 24.0 128
April 2015
15559 30.00 20.00 3.00 0.40 0.382 141.0 5.1 10.1 12.7 641 9.5 4.6 306 5.7 14.7 663 10.2 2.6 224 4.3 23.5 423
15926 30.00 20.00 4.00 0.40 0.498 184.0 5.5 10.5 16.2 829 9.4 5.7 392 5.6 18.5 847 10.0 3.4 289 4.3 23.0 981
15057 31.76 19.06 3.18 0.40 0.410 151.5 4.8 11.1 15.4 748 10.1 4.2 294 5.3 17.1 764 10.6 2.6 224 4.1 19.6 511
15058 31.76 25.40 3.18 0.40 0.465 171.7 6.8 10.0 17.1 784 10.0 9.7 522 7.5 21.8 837 11.3 5.0 348 5.4 32.0 579
15882 35.00 20.00 3.00 0.40 0.422 156.0 4.8 12.3 19.6 861 11.2 4.7 311 5.5 21.4 880 11.7 2.9 241 4.3 18.3 468
150018 38.00 25.00 3.00 0.40 0.487 180.0 6.1 12.6 26.6 1046 12.2 9.3 491 7.2 30.5 1089 13.0 5.3 3617 5.4 23.3 540
15061 38.10 12.70 3.18 0.64 0.409 151.4 2.9 15.6 22.1 982 12.1 1.3 133 2.9 22.5 981 12.2 1.0 117 2.5 7.2 510
15837 38.10 19.05 3.18 0.40 0.465 171.6 4.4 13.9 25.6 1059 12.2 4.4 300 5.1 27.2 1072 12.6 2.9 240 4.1 14.6 579
15838 38.10 25.40 3.18 0.40 0.519 191.8 6.3 12.6 28.4 1113 12.2 10.2 534 7.3 32.7 1158 13.1 5.9 391 5.5 23.7 647
15845 38.10 25.40 4.75 0.50 0.756 279.1 6.8 13.2 39.9 1601 12.0 14.1 759 7.1 45.6 1640 12.8 8.3 557 5.5 23.1 2099
15581 40.00 10.00 2.00 0.40 0.258 96.0 1.8 16.8 15.5 669 12.7 0.4 55 2.2 15.6 669 12.8 0.3 49 1.9 4.8 128
150002 40.00 20.00 1.60 0.40 0.253 93.4 4.0 14.0 16.0 613 13.1 2.9 178 5.5 17.0 628 13.5 1.8 142 4.4 15.3 80
15876 40.00 20.00 2.00 0.40 0.314 116.0 4.1 14.1 19.7 759 13.0 3.5 219 5.5 20.9 775 13.4 2.2 175 4.4 15.1 155
15886 40.00 20.00 3.00 0.40 0.463 171.0 4.5 14.5 28.3 1110 12.9 4.9 316 5.4 30.1 1126 13.3 3.2 253 4.3 14.7 513
15576 40.00 20.00 4.00 0.40 0.607 224.0 4.9 14.9 36.3 1445 12.7 6.2 406 5.2 38.4 1457 13.1 4.1 327 4.3 14.3 1195
15950 40.00 25.00 2.00 0.40 0.341 126.0 5.6 13.1 21.2 788 13.0 6.6 340 7.2 24.0 823 13.8 3.9 256 5.5 21.8 168
15986 40.00 25.00 3.00 0.40 0.504 186.0 5.9 13.4 30.7 1154 12.8 9.4 493 7.1 34.5 1195 13.6 5.5 370 5.5 21.4 558
15931 40.00 30.00 2.00 0.40 0.368 136.0 7.2 12.2 22.6 812 12.9 11.1 486 9.0 27.8 874 14.3 5.8 341 6.6 29.3 181
15562 40.00 30.00 3.00 0.40 0.544 201.0 7.5 12.5 32.6 1189 12.7 15.9 708 8.9 40.1 1267 14.1 8.4 492 6.5 29.0 603
B y 2
Torsion
Dimensions Centroid X-X Axis Y-Y Axis Principal Axis Constant
Profile
A B T r1 Mass Area Cy Cx Ix Zx Rx Iy Zy Ry I1 Z1 r1 I2 Z2 r2 Angle J
Number 2
April 2015
15976 50.80 12.70 3.18 0.50 0.519 191.8 2.6 21.6 49.3 1692 16.0 1.4 138 2.7 49.6 1690 16.1 1.1 126 2.4 4.6 647
15839 50.80 19.05 3.18 0.40 0.574 212.0 3.9 19.7 56.7 1824 16.3 4.7 308 4.7 58.1 1833 16.6 3.3 261 3.9 9.3 715
15248 50.80 25.40 1.60 0.64 0.322 119.4 4.9 17.6 33.2 998 16.7 6.0 292 7.1 35.4 1024 17.2 3.8 233 5.6 15.4 102
15073 50.80 25.40 2.02 0.76 0.409 149.8 5.0 17.7 41.3 1249 16.6 7.4 363 7.0 44.1 1279 17.2 4.7 290 5.6 15.3 204
15840 50.80 25.40 3.18 0.40 0.629 232.2 5.5 18.2 62.7 1922 16.4 11.0 550 6.9 66.7 1956 16.9 7.0 439 5.5 14.9 783
15849 50.80 25.40 4.76 0.40 0.921 340.1 6.0 18.7 89.4 2790 16.2 15.2 786 6.7 94.7 2818 16.7 10.0 632 5.4 14.4 2568
15075 50.80 25.40 6.36 0.76 1.204 444.2 6.6 19.3 113.9 3621 16.0 19.0 1010 6.5 120.0 3627 16.4 12.8 825 5.4 13.8 5989
15841 50.80 38.10 3.18 0.40 0.738 272.6 9.4 15.7 72.2 2056 16.3 35.3 1228 11.4 88.8 2203 18.1 18.7 857 8.3 29.1 919
15902 50.80 38.10 4.76 0.40 1.086 400.5 9.9 16.3 103.2 2989 16.1 49.9 1772 11.2 126.3 3159 17.8 26.8 1228 8.2 28.8 3025
15927 60.00 15.00 2.00 0.40 0.395 146.0 2.3 24.8 54.0 1536 19.2 1.6 127 3.3 54.4 1539 19.3 1.2 113 2.9 5.0 195
15582 60.00 25.00 2.00 0.40 0.449 166.0 4.5 22.0 64.0 1683 19.6 7.3 354 6.6 66.5 1706 20.0 4.8 292 5.4 11.5 221
15857 60.00 30.00 3.00 0.40 0.707 261.0 6.2 21.2 99.5 2562 19.5 17.6 739 8.2 106.0 2616 20.1 11.2 590 6.5 15.1 783
15953 60.00 30.00 4.00 0.40 0.932 344.0 6.5 21.5 129.2 3358 19.4 22.5 959 8.1 137.3 3415 20.0 14.4 766 6.5 14.9 1835
15573 60.00 30.00 5.00 0.40 1.151 425.0 6.9 21.9 157.3 4130 19.2 40.3 1304 11.8 127.5 2834 20.9 22.7 960 8.8 24.2 873
15924 60.00 40.00 3.00 0.40 0.788 291.0 9.1 19.1 109.9 2689 19.4 40.3 1304 11.8 127.5 2834 20.9 22.7 960 8.8 24.2 873
15929 60.00 40.00 4.00 0.40 1.040 384.0 9.5 19.5 142.9 3527 19.3 51.9 1701 11.6 165.3 3695 20.7 29.5 1248 8.8 24.0 2048
15888 60.00 40.00 5.00 0.40 1.287 475.0 9.9 19.9 174.2 4340 19.1 62.7 2081 11.5 200.9 4517 20.6 36.0 1524 8.7 23.7 3958
15959 60.00 40.00 6.00 0.40 1.528 564.0 10.2 20.2 203.9 5127 19.0 72.8 2446 11.4 234.5 5303 20.4 42.2 1791 8.7 23.5 6768
15899 60.00 50.00 2.00 0.40 0.585 216.0 12.1 17.1 80.9 1886 19.4 51.8 1367 15.5 107.7 2100 22.3 25.0 913 10.8 34.7 288
50
=
=
Type 4 T 2
Cy y
51
Angle Type 4 angles have legs of unequal length but of equal thickness. 1
The radii are all less than or equal to 0.80 mm.
A T
o x x
90 Cx 1
B y 2
Torsion
Dimensions Centroid X-X Axis Y-Y Axis Principal Axis Constant
Profile
A B T r1 Mass Area Cy Cx Ix Zx Rx Iy Zy Ry I1 Z1 r1 I2 Z2 r2 Angle J
Number 2 3 4 3 3 4 3 3 4 3 3 4 3 4
mm mm mm mm kg/m mm mm mm x10 mm mm mm x10 mm mm mm x10 mm mm mm x10 mm mm mm deg mm
15570 60.00 50.00 4.00 0.50 1.148 424.0 12.8 17.8 154.0 3652 19.1 97.9 2634 15.2 204.0 4002 21.9 47.8 1729 10.6 34.5 2261
15078 63.50 25.40 3.18 0.76 0.731 272.6 4.9 23.9 115.6 2922 20.6 11.5 561 6.5 119.4 2949 20.9 7.8 468 5.3 10.5 919
150010 63.50 38.10 3.18 0.40 0.848 313.0 8.3 21.0 133.2 3137 20.6 37.5 1259 10.9 148.5 3259 21.8 22.2 960 8.4 20.3 1055
15903 63.50 38.10 4.76 0.40 1.249 461.0 8.9 21.6 191.9 4583 20.4 53.0 1819 10.7 213.0 4722 21.5 31.8 1384 8.3 20.0 3481
15989 63.50 38.10 6.35 0.40 1.639 604.8 9.5 22.2 246.5 5971 20.2 67.1 2347 10.5 272.5 6101 21.2 41.0 1789 8.2 19.6 8130
15262 63.50 50.80 6.36 0.64 1.860 686.5 13.6 20.0 272.7 6266 19.9 155.1 4175 15.0 348.1 6689 22.5 79.7 2783 10.8 32.0 9256
15375 70.00 50.00 1.50 0.30 0.482 177.8 11.0 21.0 93.3 1904 22.9 41.1 1054 15.2 112.3 2054 25.1 22.1 764 11.2 27.3 133
150025 70.00 60.00 2.00 0.60 0.693 256.0 14.6 19.6 130.5 2590 22.6 89.7 1975 18.7 178.0 2913 26.4 42.2 1299 12.8 36.2 341
15520 75.00 25.00 2.00 0.50 0.531 196.0 3.9 28.9 117.3 2545 24.5 7.6 360 6.2 119.6 2564 24.7 5.3 307 5.2 8.2 261
15999 75.00 50.00 3.00 0.40 0.991 366.0 11.1 23.6 218.0 4243 24.4 80.3 2066 14.8 253.2 4490 26.3 45.1 1526 11.1 24.3 1098
15517 75.00 50.00 4.00 0.50 1.312 484.0 11.5 24.0 284.7 5583 24.3 104.1 2705 14.7 330.1 5879 26.1 58.8 1990 11.0 24.1 2581
15969 75.00 50.00 6.00 0.40 1.935 714.0 12.2 24.7 410.2 8163 24.0 147.9 3918 14.4 473.5 8508 25.8 84.7 2871 10.9 23.8 8568
April 2015
15504 76.00 22.00 2.00 0.40 0.520 192.0 3.3 30.3 116.6 2550 24.6 5.2 279 5.2 118.0 2561 24.8 3.7 242 4.4 6.5 256
15355 76.00 38.00 2.00 0.50 0.606 224.0 7.1 26.1 140.1 2808 25.0 25.5 824 10.7 149.6 2885 25.8 16.0 659 8.4 15.5 299
15421 76.20 25.40 2.03 0.76 0.548 202.1 4.0 29.4 124.8 2667 24.9 3.3 195 4.4 101.9 2246 24.7 2.4 172 3.8 5.3 176
15842 76.20 25.40 3.18 0.40 0.848 313.0 4.5 29.9 190.4 4108 24.7 11.9 570 6.2 193.9 4129 24.9 8.4 488 5.2 7.9 1055
15085 76.20 38.10 3.18 0.40 0.957 353.4 7.6 26.6 219.0 4417 24.9 39.1 1282 10.5 233.4 4520 25.7 24.7 1023 8.4 15.2 1191
15252 76.20 38.10 4.74 0.64 1.410 519.3 8.2 27.2 315.8 6448 24.7 55.3 1846 10.3 335.8 6563 25.4 35.3 1474 8.2 14.9 3889
15988 76.20 38.10 6.35 0.40 1.857 685.5 8.8 27.8 409.2 8460 24.4 70.2 2394 10.1 433.9 8565 25.2 45.6 1920 8.2 14.6 9213
15843 76.20 50.80 3.18 0.40 1.067 393.7 11.4 24.1 241.7 4635 24.8 88.9 2255 15.0 280.6 4901 26.7 50.0 1664 11.3 24.3 1327
150015 76.20 50.80 4.50 0.40 1.493 551.3 11.9 24.6 333.0 6448 24.6 121.4 3117 14.8 385.7 6774 26.5 68.7 2291 11.2 24.1 3721
15263 76.20 50.80 6.35 0.64 2.078 766.1 12.5 25.2 453.1 8889 24.3 163.1 4262 14.6 522.6 9253 26.1 93.5 3122 11.1 23.7 10297
15936 80.00 20.00 2.00 0.40 0.531 196.0 2.8 32.8 130.1 2758 25.8 4.0 231 4.5 131.1 2765 25.9 2.9 204 3.9 5.2 261
15925 80.00 30.00 3.00 0.40 0.869 321.0 5.3 30.3 217.9 4384 26.1 18.7 758 7.6 223.9 4424 26.4 12.8 636 6.3 9.7 963
15920 80.00 40.00 3.00 0.40 0.951 351.0 7.8 27.8 240.7 4613 26.2 43.2 1343 11.1 256.7 4725 27.0 27.2 1072 8.8 15.3 1053
15863 80.00 40.00 5.00 0.40 1.558 575.0 8.6 28.6 385.3 7494 25.9 67.4 2145 10.8 409.7 7628 26.7 43.0 1713 8.7 14.9 4792
15356 100.00 35.00 3.00 0.50 1.072 396.0 5.7 38.2 421.3 6822 32.6 30.7 1049 8.8 430.8 6877 33.0 21.2 889 7.3 8.8 1188
15919 100.00 40.00 3.00 0.40 1.113 411.0 6.9 36.9 440.8 6986 32.7 45.3 1369 10.5 455.8 7076 33.3 30.3 1137 8.6 10.8 1233
15878 100.00 50.00 3.00 0.40 1.195 441.0 9.5 34.5 475.8 7264 32.8 86.1 2126 14.0 507.9 7456 33.9 54.1 1699 11.1 15.4 1323
15518 100.00 50.00 4.00 0.76 1.580 584.0 9.9 34.9 624.2 9585 32.7 111.7 2785 13.8 665.5 9813 33.8 70.4 2223 11.0 15.3 3115
15858 100.00 50.00 5.00 0.40 1.964 725.0 10.3 35.3 767.8 11859 32.5 136.0 3422 13.7 817.6 12110 33.6 86.2 2730 10.9 15.1 6042
B y 2
Torsion
Dimensions Centroid X-X Axis Y-Y Axis Principal Axis Constant
Profile
A B T r1 Mass Area Cy Cx Ix Zx Rx I y Zy Ry I1 Z1 r1 I2 Z2 r2 Angle J
Number 2
April 2015
15290 127.00 50.00 2.00 0.76 0.961 350.0 7.9 46.4 613.6 7609 41.9 65.6 1534 13.6 644.9 7826 42.6 43.5 1275 11.1 11.0 483
15971 130.00 100.00 8.00 0.50 4.812 1776.0 24.7 39.7 3073.6 34045 41.6 1602.1 21283 30.0 3844.3 36692 46.5 831.5 14669 21.6 30.4 37888
15952 150.00 50.00 4.00 0.40 2.124 784.0 7.9 57.9 1876.2 20364 48.9 121.3 2878 12.4 1913.0 20513 49.4 84.4 2453 10.4 8.2 4181
150017 150.00 50.00 6.00 0.50 3.154 1164.0 8.7 58.7 2748.3 30092 48.6 172.9 4183 12.2 2799.7 30253 49.0 121.5 3577 10.2 8.0 13968
15958 150.00 100.00 10.00 0.40 6.504 2400.0 23.8 48.8 5580.4 55115 48.2 2026.3 26574 29.1 6455.5 57738 51.9 1151.2 19503 21.9 24.0 80000
150006 152.40 76.20 6.35 0.40 3.824 1411.3 15.1 53.2 3498.1 35280 49.8 625.1 10239 21.0 3728.8 36103 51.4 394.4 8171 16.7 15.3 18969
15983 152.40 76.20 9.53 0.40 5.657 2087.7 16.4 54.5 5076.9 51837 49.3 888.0 14839 20.6 5397.8 52762 50.8 567.1 11849 16.5 14.9 63203
52
=
=
Type 5 T 2
Cy y
53
Angle R2
Type 5 angles have legs of unequal length but of equal thickness. 1
The radii are all greater than 0.80 mm. o
A 90 T
R1 x x
R2 Cx 1
B y 2
Torsion
Dimensions Centroid X-X Axis Y-Y Axis Principal Axis Constant
Profile
A B T r1 r2 Mass Area Cy Cx Ix Zx Rx I y Zy Ry I1 Z1 r1 I2 Z2 r2 Angle J
Number 2 3 4 3 3 4
mm mm mm mm mm kg/m mm mm mm x10 mm mm mm x103mm4 mm3 mm x103mm4 mm mm x103mm4 mm3 mm deg mm
15852 63.50 50.80 4.76 6.35 3.18 1.425 525.7 13.1 19.1 208.6 4695 19.9 132.5 3581 15.9 272.6 5114 22.8 68.5 2446 11.4 34.1 3983
15816 76.20 50.80 6.36 7.94 4.76 2.089 771.1 13.1 24.7 443.6 8622 24.0 219.0 5809 16.9 531.9 9106 26.3 130.7 4679 13.0 28.0 10345
15333 100.00 75.00 5.00 2.00 2.50 2.298 848.2 18.2 30.3 875.4 12569 32.1 467.1 8222 23.5 1094.8 13616 35.9 247.7 5923 17.1 30.6 7083
15847 101.60 76.20 6.35 9.53 6.35 2.957 1090.9 18.9 30.7 1116.4 15735 32.0 644.8 11257 24.3 1410.2 17058 36.0 351.0 8313 17.9 31.8 14633
15819 127.00 76.20 9.53 9.53 7.94 4.981 1838.1 19.2 42.6 2984.5 35363 40.3 1303.9 22872 26.6 3459.6 37038 43.4 828.9 19981 21.2 25.1 55875
15474 140.00 63.50 6.35 9.53 4.76 3.432 1261.7 13.7 49.8 2591.8 28738 45.3 684.1 13735 23.3 2776.2 29455 46.9 499.8 13542 19.9 16.5 16827
15459 152.00 102.00 6.36 9.90 1.50 4.311 1595.1 23.0 47.3 3870.3 36980 49.3 1532.9 19393 31.0 4519.6 39178 53.2 883.7 14743 23.5 25.0 21236
April 2015
Hulamin Extrusions Standard Profile Catalogue
=
=
Type 6 T 2
Cy y
Angle R2
Type 6 angles have legs of unequal length but of equal thickness. 1
The inside corner radius is greater than 0.80 mm. o
A 90 T
Other radii are less than or equal to 0.80 mm. x x
R1 R2 Cx 1
B y 2
Torsion
Dimensions Centroid X-X Axis Y-Y Axis Principal Axis Constant
Profile
A B T r1 r2 Mass Area Cy Cx Ix Zx Rx I y Zy Ry I1 Z1 r1 I2 Z2 r2 Angle JJ
Number
April 2015
15024 101.60 63.50 6.36 8.12 0.64 2.774 1023.6 14.6 33.5 1101.1 16170 32.8 340.6 6970 18.2 1241.1 16802 34.8 200.6 5256 14.0 21.5 13612
15025 101.60 76.20 9.52 8.38 0.64 4.381 1616.9 19.9 32.5 1668.5 24163 32.1 808.9 14368 22.4 2042.9 25532 35.5 434.6 9964 16.4 28.8 48397
15027 127.00 76.20 9.52 9.14 0.64 5.044 1861.6 17.9 43.2 3102.6 37013 40.8 859.1 14741 21.5 3444.7 38129 43.0 517.0 11230 16.7 20.0 55702
15350 150.00 45.00 5.00 5.00 0.50 2.588 955.3 7.3 59.6 2258.2 24988 48.6 109.8 2912 10.7 2289.4 25091 49.0 78.6 2522 9.1 6.8 7917
15028 152.40 76.20 9.52 9.90 0.64 5.708 2106.5 16.4 54.2 5129.5 52260 49.3 898.1 15019 20.6 5452.5 53184 50.9 575.1 12010 16.5 14.9 63008
15231 152.40 76.20 12.70 9.90 0.64 7.486 2762.8 17.6 55.6 6606.6 68227 48.9 1137.0 19412 20.3 7006.4 69074 50.4 737.2 15557 16.3 14.6 147415
15457 152.40 88.90 9.52 10.42 0.76 6.037 2229.6 20.0 51.6 5416.7 53715 49.3 1407.2 20430 25.1 5971.6 55384 51.8 852.3 15719 19.6 19.2 66660
15486 228.60 76.20 6.34 12.96 0.64 5.225 1928.1 12.1 87.0 10750.3 75945 74.7 686.0 10703 18.9 10953.3 76460 75.4 483.0 9157 15.8 8.0 25353
54
=
=
Type 1 T1 Cy y
55
Channel Type 1 channels are of a uniform thickness with
90
o
all radii less than or equal to 0.80 mm. A T1 x x
R1
B e y
Shear Torsion
Dimensions X-X Axis Y-Y Axis Centroid Centre Constant
Profile
A B T1 R1 Mass Area Ix Zx r Iy Zy r Cy e J
Number 2 3 4 3 3 4 3 4
mm mm mm mm kg/m mm x10 mm mm mm x10 mm mm mm mm mm mm
16923 25.00 12.00 1.50 0.50 0.186 69.1 6.3 506 9.6 0.9 107 3.6 3.5 3.4 52
16395 25.00 20.00 1.50 0.30 0.251 93.0 9.6 770 10.2 3.8 288 6.4 6.7 7.2 70
16446 25.00 25.00 2.00 0.40 0.384 142.1 14.8 1185 10.2 9.1 575 8.0 9.1 9.3 189
16448 25.00 25.00 3.00 0.40 0.561 207.1 20.0 1599 9.8 12.9 828 7.9 9.5 8.5 621
16045 25.40 12.70 1.60 0.64 0.207 76.3 7.2 570 9.7 1.1 127 3.9 3.8 3.6 65
16825 25.40 12.70 3.18 0.40 0.383 141.4 11.9 935 9.2 1.9 229 3.7 4.3 2.5 476
16048 25.40 15.88 1.60 0.64 0.234 86.5 8.7 684 10.0 2.1 197 5.0 5.0 5.1 74
16826 25.40 19.05 3.18 0.40 0.492 181.8 16.9 1330 9.6 6.3 514 5.9 6.9 5.5 612
16827 25.40 25.40 3.18 0.40 0.601 222.2 21.9 1725 9.9 14.2 901 8.0 9.7 8.6 749
16828 25.40 50.80 3.18 0.40 1.039 383.7 42.0 3306 10.5 98.5 3377 16.0 21.6 21.0 1293
16881 25.70 23.60 1.60 0.50 0.302 111.6 12.5 974 10.6 6.5 421 7.6 8.2 8.9 95
160002 27.00 20.00 3.00 0.50 0.495 183.1 19.7 1459 10.4 7.0 544 6.2 7.1 6.0 549
April 2015
16371 27.16 25.00 3.00 0.50 0.578 213.6 24.4 1795 10.7 13.3 841 7.9 9.2 8.4 640
16339 29.00 12.70 1.20 0.50 0.169 62.5 7.8 537 11.2 0.9 100 3.9 3.4 3.8 30
16530 29.00 65.00 3.00 0.50 1.243 459.1 69.3 4776 12.3 193.8 5214 20.5 27.8 28.0 1377
16056 29.84 15.88 3.18 0.76 0.475 175.9 21.5 1441 11.1 3.9 368 4.7 5.2 3.8 592
16889 30.00 20.00 2.00 0.40 0.357 132.1 18.6 1243 11.9 5.2 387 6.3 6.5 6.6 176
16449 30.00 30.00 3.00 0.40 0.683 252.1 36.4 2427 12.0 22.9 1216 9.5 11.1 10.7 756
16830 31.75 31.75 3.18 0.40 0.766 282.7 45.7 2880 12.7 28.8 1443 10.1 11.8 11.3 953
16059 31.76 12.70 3.18 0.64 0.438 161.7 20.9 1318 11.4 2.1 237 3.6 4.0 2.2 545
16061 31.76 25.40 2.64 0.76 0.553 204.3 32.6 2055 12.6 13.2 796 8.0 8.8 8.6 474
16384 32.00 12.00 1.50 0.50 0.214 79.6 11.4 716 12.0 1.0 111 3.5 3.1 3.1 60
16067 32.20 19.04 1.56 0.64 0.282 104.9 17.2 1068 12.8 3.8 283 6.0 5.7 6.3 85
160014 35.20 100.00 2.00 0.50 1.253 462.5 115.4 6559 15.8 463.1 8180 31.6 43.4 45.8 617
16568 36.00 15.48 1.40 0.20 0.241 89.8 17.3 959 13.9 2.0 174 4.7 4.1 4.6 59
16372 38.00 25.00 2.00 0.20 0.455 168.0 39.0 2052 15.2 10.6 617 7.9 7.8 8.6 224
16408 38.00 50.00 6.00 0.25 2.049 756.0 164.2 8642 14.7 185.4 6276 15.7 20.5 17.7 9072
16831 38.10 12.70 3.18 0.30 0.492 181.7 33.2 1741 13.5 2.2 243 3.5 3.7 2.0 612
16832 38.10 19.05 3.18 0.40 0.601 222.2 45.5 2390 14.3 7.2 550 5.7 5.9 4.9 749
16833 38.10 25.40 3.18 0.40 0.711 262.5 57.9 3038 14.8 16.4 969 7.9 8.4 7.9 885
16834 38.10 38.10 3.18 0.40 0.930 343.3 82.6 4334 15.5 51.1 2114 12.2 13.9 14.1 1157
B e y
Shear Torsion
Dimensions X-X Axis Y-Y Axis Centroid Centre Constant
Profile
A B T1 R1 Mass Area Ix Zx r Iy Zy r Cy e J
Number
April 2015
16413 47.31 19.06 1.43 0.50 0.319 118.2 39.2 1658 18.2 3.9 276 5.8 4.8 5.7 80
16332 48.51 12.70 1.60 0.30 0.305 113.2 34.8 1434 17.5 1.4 138 3.5 2.8 2.8 97
16423 48.90 19.06 1.80 0.50 0.406 150.3 52.1 2130 18.6 4.9 343 5.7 4.8 5.4 162
16927 50.00 23.00 2.00 0.50 0.498 184.1 69.3 2772 19.4 9.2 547 7.1 6.2 7.0 245
16588 50.00 25.00 1.50 0.50 0.394 145.6 57.2 2286 19.8 8.9 491 7.8 6.8 8.3 109
16451 50.00 30.00 3.00 0.40 0.845 312.1 120.9 4835 19.7 27.5 1327 9.4 9.3 9.6 936
160034 50.00 50.00 3.00 0.40 1.170 432.1 187.2 7489 20.8 113.2 3519 16.2 17.8 19.3 1296
160003 50.00 50.00 4.00 0.40 1.539 568.1 236.9 9474 20.4 146.2 4595 16.0 18.2 18.6 3029
16110 50.80 14.48 1.78 0.76 0.366 135.9 46.8 1841 18.5 2.2 198 4.0 3.3 3.3 143
16836 50.80 25.40 3.18 0.40 0.820 302.9 115.0 4528 19.5 18.1 1013 7.7 7.5 7.3 1021
16882 50.80 25.40 4.76 0.40 1.188 438.4 156.5 6162 18.9 24.9 1438 7.5 8.1 6.2 3310
16872 50.80 25.40 6.35 0.40 1.529 564.6 189.7 7469 18.3 30.7 1829 7.4 8.6 5.0 7588
160029 50.80 38.10 6.35 0.40 1.967 725.9 269.9 10627 19.3 100.0 4108 11.7 13.8 11.0 9755
16856 50.80 50.80 3.18 0.40 1.258 464.5 206.7 8139 21.1 125.4 3840 16.4 18.2 19.5 1565
16837 50.80 50.80 6.35 0.40 2.404 887.2 350.1 13785 19.9 226.5 7198 16.0 19.3 17.1 11923
16369 51.60 25.90 1.80 0.50 0.486 179.7 74.5 2887 20.4 11.8 627 8.1 7.2 8.5 194
16869 55.00 50.00 2.00 0.40 0.818 302.1 162.7 5915 23.2 80.6 2435 16.3 16.9 19.7 403
16119 59.54 21.60 3.30 0.76 0.858 317.5 153.8 5167 22.0 12.3 775 6.2 5.8 5.1 1152
16452 60.00 20.00 2.00 0.40 0.520 192.1 96.6 3221 22.4 6.5 425 5.8 4.7 5.3 256
56
=
=
Type 1 T1 Cy y
57
Channel Type 1 channels are of a uniform thickness with
90
o
all radii less than or equal to 0.80 mm. A T1 x x
R1
B e y
Shear Torsion
Dimensions X-X Axis Y-Y Axis Centroid Centre Constant
Profile
A B T1 R1 Mass Area Ix Zx r Iy Zy r Cy e J
Number 2 3 4 3 3 4 3 4
mm mm mm mm kg/m mm x10 mm mm mm x10 mm mm mm mm mm mm
16870 60.00 40.00 3.00 0.40 1.089 402.1 234.5 7818 24.2 65.2 2376 12.7 12.5 13.9 1206
16398 60.00 40.00 4.00 0.30 1.430 528.0 298.2 9940 23.8 83.8 3093 12.6 12.9 13.2 2816
16457 60.00 50.00 3.00 0.40 1.252 462.1 283.3 9444 24.8 120.7 3632 16.2 16.8 18.7 1386
16458 60.00 60.00 3.00 0.40 1.414 522.1 332.1 11070 25.2 198.9 5120 19.5 21.2 23.6 1566
160036 63.50 25.40 3.18 0.40 0.930 343.3 196.6 6191 23.9 19.4 1044 7.5 6.8 6.8 1157
16453 65.00 25.00 2.50 0.40 0.745 275.1 167.2 5145 24.7 15.2 817 7.4 6.4 7.0 573
16447 70.00 35.00 3.00 0.40 1.089 402.1 301.4 8612 27.4 47.3 1880 10.8 9.9 11.0 1206
160045 71.00 40.00 4.00 0.50 1.549 572.1 443.0 12479 27.8 88.7 3175 12.5 12.1 12.6 3051
160024 75.00 50.00 6.00 0.40 2.650 978.1 841.0 22428 29.3 238.4 7115 15.6 16.5 15.8 11736
16434 76.00 20.00 1.50 0.50 0.459 169.6 132.0 3475 27.9 5.3 334 5.6 4.0 5.1 127
16281 76.20 14.30 1.60 0.64 0.441 162.7 115.8 3039 26.7 2.1 182 3.6 2.6 2.7 139
16248 76.20 25.40 3.18 0.64 1.037 383.8 306.0 8030 28.2 20.4 1067 7.3 6.3 6.3 1293
April 2015
16126 76.20 38.10 3.18 0.64 1.258 464.6 413.7 10858 29.8 64.8 2366 11.8 10.7 12.1 1565
160030 76.20 38.10 4.76 0.40 1.843 680.2 581.2 15253 29.2 91.5 3411 11.6 11.3 11.0 5137
160039 76.20 38.10 6.36 0.40 2.407 888.4 728.2 19114 28.6 115.5 4396 11.4 11.8 9.8 11978
16127 76.20 44.46 3.18 0.64 1.367 505.0 467.6 12274 30.4 99.8 3186 14.1 13.1 15.1 1702
160038 76.20 50.80 3.18 0.40 1.477 545.2 521.3 13682 30.9 144.3 4111 16.3 15.7 18.1 1838
16880 76.20 50.80 6.35 0.40 2.841 1048.5 924.7 24269 29.7 262.7 7737 15.8 16.9 15.8 14091
16587 80.00 35.00 2.00 0.50 0.791 292.1 286.3 7158 31.3 34.2 1310 10.8 8.9 11.3 389
16414 80.75 24.22 2.00 0.64 0.676 250.6 225.8 5594 30.0 12.1 640 7.0 5.3 6.4 334
16129 82.55 38.10 2.38 0.64 0.997 366.7 385.1 9330 32.4 51.3 1826 11.8 10.0 12.3 692
16879 86.00 40.00 3.00 0.40 1.300 480.1 541.6 12596 33.6 73.3 2504 12.4 10.7 12.6 1440
16477 96.10 19.00 1.50 0.50 0.539 199.2 234.0 4870 34.3 5.5 334 5.2 3.5 4.5 149
16876 100.00 40.00 3.00 0.40 1.414 522.1 772.5 15450 38.5 76.6 2553 12.1 10.0 12.0 1566
16877 100.00 50.00 5.00 0.40 2.574 950.1 1433.1 28661 38.8 225.0 6310 15.4 14.3 15.3 7917
16133 101.60 50.80 3.18 0.78 1.695 626.2 1012.2 19925 40.2 158.4 4289 15.9 13.9 16.8 2110
160032 101.60 50.80 6.00 0.40 3.109 1147.3 1754.5 34537 39.1 276.1 7690 15.5 14.9 14.9 13766
16911 104.00 42.00 2.00 0.50 0.997 368.1 604.0 11615 40.5 61.3 1923 12.9 10.1 13.5 491
160006 105.00 38.00 2.00 0.50 0.959 354.1 575.2 10956 40.3 46.5 1587 11.5 8.7 11.6 472
16801 108.74 44.45 3.17 0.78 1.642 606.7 1069.8 19676 42.0 111.0 3334 13.5 11.2 13.6 2013
16135 111.24 38.10 4.56 0.76 2.208 813.4 1394.5 25073 41.4 98.8 3448 11.0 9.4 9.7 5636
B e y
Shear Torsion
Dimensions X-X Axis Y-Y Axis Centroid Centre Constant
Profile
A B T1 R1 Mass Area Ix Zx r Iy Zy r Cy e J
Number
April 2015
58
=
=
Type 2 T1 Cy y
59
Channel Type 2 channels have the web and flanges of different thicknesses
90
o
and all radii are less than or equal to 0.80 mm. A T2 x x
R1
B e y
Shear Torsion
Dimensions X-X Axis Y-Y Axis Centroid Centre Constant
Profile
A B T1 T2 R1 Mass Area Ix Zx r Iy Zy r Cy e J
Number 2 3 4 3 3 4 3 4
mm mm mm mm mm kg/m mm x10 mm mm mm x10 mm mm mm mm mm mm
16118 58.82 25.40 3.30 3.03 0.76 0.889 340.2 168.7 5735 22.3 19.5 1068 7.6 7.1 6.9 1234
April 2015
Hulamin Extrusions Standard Profile Catalogue
=
=
Type 3 T1 Cy y
Channel R2
Type 3 channels may have the web and flanges of different thicknesses. o
90 T
The two inside corner radii are always greater than 0.80 mm. A 2 x x
All other radii are less than or equal to 0.80 mm. R1
B e y
Shear Torsion
Dimensions X-X Axis Y-Y Axis Centroid Centre Constant
Profile
A B T1 T2 R1 R2 Mass Area Ix Zx r Iy Zy r Cy e J
Number 2 3 4 3 4
April 2015
16266 130.00 60.00 4.00 6.00 6.00 0.76 3.270 1207.2 3368.1 51816 52.8 426.1 10189 18.8 18.2 21.0 10837
16566 150.00 35.00 10.00 25.00 11.10 0.80 7.594 2802.6 7879.7 105063 53.0 162.9 6442 7.6 9.7 6.2 310417
16235 152.40 50.80 6.36 7.96 9.14 0.64 4.543 1712.4 5726.3 75149 57.8 370.4 9918 14.7 13.5 13.3 28011
16159 152.40 63.50 6.36 7.92 10.66 0.64 5.215 1923.0 6815.5 89443 59.5 706.5 15493 19.2 17.9 18.9 31993
16289 152.40 76.20 6.36 9.52 12.18 0.64 6.401 2362.5 8933.2 117233 61.5 1313.4 25111 23.6 23.9 25.8 53241
16524 152.40 76.20 9.52 12.70 12.20 0.62 8.694 3208.2 11330.4 148693 59.4 1697.6 32638 23.0 24.2 23.2 134888
16539 177.80 50.80 6.36 9.52 9.14 0.76 5.455 2012.6 9188.8 103361 67.6 421.8 11245 14.5 13.3 13.5 40809
16000 177.80 76.20 6.34 11.12 12.20 0.62 7.437 2744.7 14136.5 159016 71.8 1491.4 28315 23.3 23.5 26.0 79144
16234 177.80 88.90 7.92 12.70 13.72 0.64 9.608 3545.7 18186.5 204572 71.6 2649.2 43880 27.3 28.5 30.4 140029
16598 203.00 89.00 9.52 14.28 14.28 0.64 11.625 4289.9 27504.5 270980 80.1 3096.2 50114 26.9 27.2 28.0 212678
16541 203.20 65.02 11.84 11.84 12.70 0.80 10.100 3734.1 20343.3 200229 73.8 1205.5 25125 18.0 17.0 12.7 171269
16001 203.20 76.20 7.14 11.10 7.14 0.62 8.144 3005.7 19323.6 190193 80.2 1595.0 29448 23.0 22.0 24.4 87620
160023 203.20 76.20 9.52 12.70 12.20 0.64 10.004 3691.8 22518.7 221641 78.1 1859.9 34091 22.4 21.6 21.4 149498
16538 203.60 76.20 9.52 12.70 12.20 0.76 10.658 3933.6 29859.5 261.238 87.1 1926.7 34657 22.1 20.6 20.5 156803
60
=
=
Type 4 and 5 T1 Cy y
61
Channel R3 R2
Type 4 & 5 channels may have the web and flanges of different thicknesses. o
90 T
All radii may be less than or greater than 0.80 mm. A 2 x x
R1
B e y
Shear Torsion
Dimensions X-X Axis Y-Y Axis Centroid Centre Constant
Profile
A B T1 T2 r1 r2 r3 Mass Area Ix Zx r Iy Zy r Cy e J
Number 2 3 4 3 3 4 4
mm mm mm mm mm mm mm kg/m mm x10 mm mm mm x10 mm mm3 mm mm mm mm
16518 29.46 25.40 2.04 2.04 1.14 3.18 1.02 0.409 151.6 21.6 1468 11.9 9.2 540 7.8 8.3 9.5 216
16442 38.30 30.00 1.40 1.40 1.00 2.40 0.50 0.357 131.7 33.1 1731 15.9 11.7 567 9.4 9.3 11.6 87
16412 54.60 13.00 1.20 1.20 3.00 4.20 0.25 0.245 90.1 33.5 1228 19.3 0.5 47 2.4 1.7 3.3 45
160021 127.00 63.00 8.00 8.00 2.00 4.00 0.50 5.123 1890.8 4469.1 70380 48.6 682.4 15318 19.0 18.5 18.1 40448
16583 150.00 100.00 10.00 10.00 7.50 1.00 15.00 8.744 3323.7 11742.6 156568 59.4 3282.0 48346 31.4 32.1 32.7 110000
160054 152.40 50.80 4.76 6.35 9.14 1.00 1.00 3.644 1345.6 4687.1 61510 59.0 304.2 8087 15.0 13.2 14.6 13338
16327 31.25 23.80 1.60 1.60 0.78 2.36 0.80 0.321 118.9 19.2 1232 12.7 6.5 399 7.4 7.5 8.9 103
16326 34.93 25.40 1.60 1.60 0.78 2.36 0.80 0.351 129.9 26.3 1505 14.2 8.1 463 7.9 7.8 9.4 113
16817 51.00 50.00 3.00 3.00 2.00 0.50 5.00 1.154 436.6 196.6 7709 21.2 114.3 3531 16.2 17.6 19.2 1305
16267 200.02 88.90 11.12 11.12 13.72 0.76 13.72 10.731 4034.6 23459.3 234569 76.3 2835.5 44226 26.5 24.8 23.8 162979
April 2015
Hulamin Extrusions Standard Profile Catalogue
=
=
T2 y
I - Sections o
I-sections may have web and flanges of different thicknesses.. 90 R2
T1
A x x
T1
R1
R3 B y
Torsion
Dimensions X-X Axis Y-Y Axis Constant
Profile
A B T1 T2 r1 r2 Mass Area Ix Zx Rx Iy Zy Ry J
Number
April 2015
17069 152.40 101.60 6.36 6.36 0.78 0.78 5.899 2180.2 8336.4 109402 61.8 1112.0 21890 22.6 29403
17092 177.80 101.60 9.54 9.54 0.76 0.76 9.356 3452.2 16910.2 190216 70.0 1676.5 33002 22.0 104746
17507 177.80 101.60 11.11 7.94 1.50 11.50 9.760 3602.5 18813.5 211625 72.3 1953.1 38446 23.3 118844
17091 203.20 101.60 11.12 7.94 0.80 11.43 10.320 3807.5 25644.0 252401 82.1 1962.6 38634 22.7 123330
62
=
=
Type 1 A y
63
T - Sections Type 1 tees are of a uniform thickness. o Cx
The head and body of the tee may not be equal in length. 90 R1
B x x
All radii are less than or equal to 0.80 mm. T
T y
Torsion
Dimensions X-X Axis Y-Y Axis Centroid Constant
Profile
A B T R1 Mass Area Ix Zx r Iy Zy r Cx J
Number
mm mm mm mm kg/m mm2 x103mm4 mm3 mm x103mm4 mm3 mm mm mm4
14117 25.00 25.00 1.60 0.30 0.209 77.4 6.3 0.4 0.3 2.1 0.2 0.2 7.3 74
14514 25.00 25.00 2.00 0.40 0.260 96.0 7.8 0.4 0.3 2.6 0.2 0.2 7.5 143
14017 25.40 25.40 3.18 0.64 0.409 151.4 12.7 0.7 0.3 4.4 0.3 0.2 8.4 572
14019 25.40 38.10 3.18 0.64 0.520 191.8 16.3 0.9 0.3 14.7 0.8 0.3 6.9 724
14091 25.40 44.45 3.18 0.20 0.574 212.0 18.5 1.0 0.3 23.3 1.0 0.3 6.4 800
14215 35.00 35.00 3.00 0.40 0.544 201.0 31.9 1.3 0.4 10.8 0.6 0.2 10.6 675
14032 38.10 12.70 1.14 0.50 0.153 56.6 13.8 0.6 0.5 0.2 0.0 0.1 15.2 27
14067 38.10 38.10 2.38 0.80 0.475 175.7 33.1 1.2 0.4 11.0 0.6 0.3 11.0 372
14536 38.10 38.10 6.35 0.76 1.201 443.5 84.1 3.4 0.4 29.9 1.6 0.3 13.6 6677
14068 38.45 38.45 3.20 0.63 0.629 235.8 45.2 1.7 0.4 15.3 0.8 0.3 11.6 902
14121 40.00 20.00 3.00 0.20 0.463 171.0 41.4 1.7 0.5 2.1 0.2 0.1 15.5 575
14512 40.00 40.00 4.00 0.40 0.823 304.0 63.1 2.3 0.5 21.5 1.1 0.3 12.5 1816
April 2015
14539 50.00 50.00 1.50 0.50 0.400 147.8 48.0 1.3 0.6 15.6 0.6 0.3 13.4 124
14506 50.00 50.00 4.00 0.40 1.040 384.0 124.5 3.6 0.6 41.9 1.7 0.3 15.0 2294
14080 50.80 25.40 2.03 0.76 0.407 150.6 57.7 1.8 0.6 2.8 0.2 0.1 18.4 232
14520 50.80 31.75 6.35 0.30 1.311 483.9 179.9 5.9 0.6 17.9 1.1 0.2 20.1 7284
14072 50.80 50.80 6.35 0.40 1.639 604.8 202.9 6.0 0.6 70.3 2.8 0.3 16.7 9105
14507 60.00 60.00 4.00 0.40 1.257 464.0 216.7 5.1 0.7 72.3 2.4 0.4 17.5 2772
14508 60.00 60.00 6.00 0.40 1.853 684.0 319.6 7.8 0.7 109.0 3.6 0.4 18.8 9193
14529 76.20 76.20 6.36 0.40 2.517 928.8 699.6 13.2 0.9 236.0 6.2 0.5 23.1 14026
14208 80.00 60.00 3.60 0.40 1.330 491.0 421.5 7.7 0.9 65.1 2.2 0.4 25.3 2376
14505 100.00 60.00 5.00 0.40 2.100 775.0 1095.7 16.8 1.2 91.0 3.0 0.3 34.8 7233
T y
Torsion
Dimensions X-X Axis Y-Y Axis Centroid Constant
Profile
A B T R1 R2 Mass Area Ix Zx r Iy Zy r Cx J
Number
April 2015
64
=
=
Index
Die Nr Pg Die Nr Pg Die Nr Pg Die Nr Pg Die Nr Pg Die Nr Pg Die Nr Pg Die Nr Pg
11 25 10517 31 101157 32 101508 31 14208 63 15064 17 15216 20 15459 53
76 25 10520 32 101158 31 101515 33 14214 42 15064 50 15216 54 15474 19
282 26 10533 31 101159 32 101516 34 14215 42 15065 17 15225 20 15474 53
736 43 10534 31 101162 31 101518 34 14215 63 15065 50 15225 54 15485 15
10005 31 10535 32 101164 31 101524 32 14502 43 15067 17 15227 20 15485 45
10015 31 10536 32 101165 31 101527 33 14502 64 15067 50 15227 54 15486 20
10021 31 10537 31 101166 32 101528 32 14503 43 15073 18 15228 20 15486 54
10022 31 10538 32 101169 31 101535 32 14503 64 15073 50 15228 54 15504 18
10023 31 10539 32 101170 32 101537 31 14505 42 15075 18 15231 20 15504 51
10024 31 10540 32 101171 32 101546 31 14505 63 15075 50 15231 54 15517 18
10027 31 10541 32 101173 32 101547 31 14506 42 15078 18 15234 16 15517 51
10029 31 10542 32 101175 31 101551 31 14506 63 15078 51 15234 48 15518 18
10036 31 10546 31 101176 31 101555 32 14507 42 15085 18 15236 17 15518 51
10042 31 10547 31 101177 31 101563 32 14507 63 15085 51 15241 17 15519 19
10043 31 10548 31 101178 31 101571 32 14508 42 15103 16 15241 49 15519 52
10044 31 10550 32 101179 31 101572 32 14508 63 15103 48 15248 18 15520 18
10045 31 10551 32 101180 31 101573 32 14512 42 15104 16 15248 50 15520 51
10074 32 10553 32 101181 31 101574 32 14512 63 15104 48 15252 18 15524 18
10076 32 10555 32 101183 31 101575 31 14514 42 15110 16 15252 51 15524 52
10081 32 10558 31 101184 31 101577 33 14514 63 15110 48 15262 18 15526 15
10094 32 10559 31 101185 31 101578 32 14518 42 15111 16 15262 51 15526 44
10095 32 10560 31 101186 32 101581 32 14520 42 15111 48 15263 18 15527 15
10096 33 10561 31 101187 32 101585 31 14520 63 15112 16 15263 51 15527 44
10097 33 10562 32 101188 32 101586 31 14523 43 15112 48 15264 17 15529 15
10104 33 10563 32 101189 32 101587 32 14523 64 15113 16 15264 49 15529 44
10105 33 10564 32 101190 32 101588 31 14524 43 15113 48 15271 20 15532 15
10106 33 10565 32 101191 31 101591 33 14524 64 15119 16 15271 54 15532 45
10114 33 10566 32 101192 31 101592 31 14529 42 15119 48 15272 20 15533 15
10115 33 10567 31 101194 31 101593 31 14529 63 15121 16 15272 54 15533 45
10118 33 10568 31 101196 31 101594 32 14531 43 15121 48 15286 16 15540 15
10122 33 10569 31 101199 34 101595 33 14531 64 15122 16 15286 48 15540 44
10132 34 10573 31 101200 33 101596 31 14532 43 15122 48 15287 16 15543 16
10142 34 10577 31 101202 33 101597 32 14532 64 15123 16 15287 48 15543 47
10167 31 10578 31 101203 32 101598 32 14533 43 15123 48 15290 19 15544 16
10209 32 10579 31 101204 31 101602 33 14533 64 15125 16 15290 52 15544 47
10216 33 10726 32 101206 32 101608 31 14536 42 15125 48 15291 15 15545 16
10229 31 10745 31 101209 31 101609 31 14536 63 15127 16 15291 44 15545 47
10231 31 10777 33 101210 32 101629 31 14538 43 15127 48 15294 16 15546 16
10248 31 10809 31 101212 31 101651 32 14539 42 15128 16 15294 48 15546 47
10249 31 10921 33 101213 31 101658 33 14539 63 15128 48 15295 20 15547 16
10250 31 10925 32 101214 33 14005 42 15002 20 15130 16 15297 15 15547 47
10251 31 10946 32 101217 32 14013 42 15002 54 15130 48 15323 20 15554 15
10253 31 101113 32 101218 31 14017 42 15010 20 15132 16 15333 19 15555 15
10265 32 101115 33 101221 32 14017 63 15010 54 15132 48 15333 53 15555 44
10267 32 101123 32 101224 31 14019 42 15011 20 15135 16 15339 17 15556 15
10270 32 101124 32 101228 32 14019 63 15011 54 15135 47 15339 50 15557 15
10273 32 101126 32 101231 33 14032 42 15012 20 15137 15 15341 20 15557 44
10280 32 101127 31 101234 32 14032 63 15012 54 15145 15 15346 17 15558 17
10286 32 101128 32 101236 32 14043 43 15016 20 15147 15 15347 17 15558 49
10289 32 101129 32 101237 32 14043 64 15016 54 15148 15 15347 49 15559 17
10319 32 101130 32 101238 32 14047 43 15017 20 15158 15 15350 20 15559 49
10321 32 101132 31 101240 32 14047 64 15017 54 15158 44 15350 54 15562 17
10324 33 101133 31 101243 31 14050 43 15024 20 15163 15 15355 18 15562 49
10351 34 101134 31 101244 31 14050 64 15024 54 15163 44 15355 51 15564 17
10358 33 101135 31 101245 32 14058 43 15025 20 15164 15 15356 18 15564 50
10360 33 101136 31 101258 31 14058 64 15025 54 15164 44 15356 52 15565 15
10363 31 101137 32 101261 31 14067 42 15027 20 15170 15 15359 15 15567 17
10365 32 101138 32 101264 31 14067 63 15027 54 15170 44 15359 44 15567 49
10369 32 101139 32 101265 31 14068 42 15028 20 15174 15 15363 15 15570 18
10383 34 101140 32 101266 32 14068 63 15028 54 15174 45 15363 45 15570 51
=
10387 32 101141 32 101267 32 14072 42 15038 17 15176 15 15373 15 15571 17
10397 34 101142 32 101269 32 14072 63 15039 17 15176 45 15373 45 15571 50
10399 32 101144 32 101270 31 14080 42 15041 17 15178 15 15375 18 15572 15
10409 32 101145 33 101272 32 14080 63 15042 17 15178 46 15375 51 15572 45
10429 32 101146 33 101273 31 14091 42 15050 17 15192 15 15379 19 15573 18
10465 32 101147 33 101279 33 14091 63 15050 49 15192 44 15379 52 15573 50
10477 31 101148 33 101281 34 14097 43 15051 17 15193 15 15408 17 15574 15
10490 32 101149 33 101282 32 14097 64 15051 49 15193 44 15420 15 15576 17
10492 34 101151 32 101286 32 14116 42 15057 17 15206 15 15420 46 15576 49
65
10493
10503
10504
10509
10512
31
31
31
31
32
101152 32
101153 32
101154 32
101155 31
101156 32
101289 33
101298 32
101313 31
101332 32
101504 31
14117 42
14117 63
14121 42
14121 63
14208 42
April 2015
15057
15058
15058
15061
15061
49
17
49
17
49
15206
15207
15207
15210
15210
45
15
45
15
45
15421
15421
15457
15457
15459
18
51
20
54
19
15578
15579
15581
15581
15582
15
15
17
49
18
April 2015
16413
16413
16414
16414
16421
22
56
23
57
21
16801
16806
16817
16817
16825
57
24
25
61
21
160002
160003
160003
160006
160006
55
22
56
23
57
17110 41
17123 41
17128 43
17131 41
17206 41
66
=
Index
Die Nr Pg Die Nr Pg Die Nr Pg Die Nr Pg
17206 62 H3523 37 H4918 39 H8055 37
17207 41 H3557 40 H4919 40 H8056 40
17207 62 H4026 37 H4932 36 H8087 39
17211 41 H4084 39 H4933 37 H8088 36
17401 41 H4091 36 H4937 37 H8100 40
17408 41 H4092 36 H4944 39 H8101 36
17408 62 H4125 36 H4963 36 H8102 37
17411 41 H4147 37 H4964 39 H8107 37
17411 62 H4316 40 H4969 36 H8130 36
17502 41 H4318 36 H4971 39 H8143 40
17502 62 H4415 39 H4972 39 H8161 36
17507 41 H4488 37 H4975 37 H8166 38
17507 62 H4519 40 H4977 37 H8167 40
17511 41 H4520 38 H4983 37 H8207 38
17515 41 H4521 38 H4985 37 H8228 40
17527 41 H4522 38 H4993 36 H8276 40
17527 62 H4525 40 H5037 39 H8339 36
17529 41 H4570 39 H5396 37 H8341 36
17529 62 H4571 39 H5433 39 H9084 40
38396 43 H4575 40 H5440 36 H9154 36
38397 43 H4576 40 H5441 36 H10078 38
39955 35 H4577 40 H5674 39 H10495 40
H0007 38 H4582 37 H5775 36
H0012 39 H4583 37 H5836 39
H0022 39 H4605 36 H5852 36
H0041 39 H4643 39 H5958 39
H0101 39 H4660 39 H6217 39
H0102 36 H4661 40 H6339 37
H0175 39 H4665 38 H6429 39
H0238 39 H4666 39 H6436 39
H0247 37 H4668 39 H6442 36
H0256 40 H4669 39 H6443 37
H0315 39 H4670 40 H6444 36
H0363 39 H4689 36 H6446 37
H0412 40 H4690 39 H6447 39
H448 26 H4691 37 H6450 39
H0454 37 H4694 36 H6451 39
H0532 36 H4707 36 H6452 40
H0637 37 H4720 40 H6473 37
H0668 37 H4721 37 H6496 39
H0803 37 H4722 39 H6516 37
H0823 39 H4729 36 H6539 39
H1204 38 H4730 36 H6541 36
H1358 37 H4731 36 H6542 39
H1485 36 H4732 38 H6543 36
H1561 36 H4733 38 H6544 40
H1568 36 H4736 38 H6545 36
H1569 37 H4737 38 H6547 37
H1639 37 H4738 38 H6548 37
H1671 40 H4739 38 H6556 37
H1673 40 H4742 38 H6558 37
H2027 40 H4744 37 H6559 39
H2045 36 H4745 37 H6560 36
H2071 37 H4746 40 H6569 37
H2105 39 H4747 37 H6602 37
H2256 39 H4748 37 H6637 37
H2262 36 H4750 37 H6638 37
H2268 40 H4751 37 H6639 37
H2309 40 H4754 40 H6640 40
H2497 36 H4759 39 H6641 36
H2547
H2564
H2591
H2961
H3002
H3012
H3078
H3115
H3121
36
39
36
38
39
40
39
36
39
H4788
H4792
H4797
H4855
H4887
H4890
H4891
H4894
H4895
37
36
38
36
40
37
37
40
36
H6668
H6913
H6918
H6932
H7020
H7043
H7222
H7312
H7509
37
39
38
36
36
36
36
39
39
=
67
H3176
H3197
H3209
H3308
H3454
38
37
36
38
40
H4900
H4912
H4915
H4916
H4917
38
36
37
37
38
H7511
H7512
H7529
H7573
H8047
39
39
36
39
36
=
Hulamin Extrusions Standard Profile Catalogue April 2015 68
=
Notes
=
69 April 2015 Hulamin Extrusions Standard Profile Catalogue
=
www.hulaminextrusions.co.za
=
=
Head Office and Midrand Operation
Tel: +27 (11) 206 0200
Fax: +27 (11) 206 0206
Address: cnr Main & Olifantsfontein Road, Olifantsfontein
PO Box 25, Olifantsfontein, 1665, South Africa
GPS Co-ordinates: Latitude: 25°57'32.98"S
Longitude: 28°13'51.21"E