gs Soluxled
1. Precaution
2. Avoid power operation, in case of electric shock hazard,
Cut off during repair process,
3. Ensure luminaire installation support system can load 4 times weight of
luminaire,
4, Luminaire installation position should maintain good ventilation, without
corrosive, flammable and explosive media around, luminaire should avoid
violent vibration and shock,
_ Do not disassemble luminaire, otherwise user must bear all possible con -
sequences,
6. Connect wire to luminarie cable correctly, pay attention to the cable's
phase and tags.
7. Ensure lighting output part is not contaminated in installation and result-
ing in light efficiency reduction,
8. Luminaire surface is not allowed to be covered by heat insulation material,
LED Panel Light
Instruction manual
by SoluxledProduct features
[ installation Type : [Recessed Type __ 1. Remove plafond from the framework
‘Application : ‘Supermarkets, Hospital, Metro Station, .
|_ Offices etc, (with dry indoor) 2. Open the box, remove the panel, connect the power cable
‘Ambient Humidity : 10%~90%R.H. according to following table,
‘Ambient Temperature: | -20°C~+ 40°C
[ storage Temperature: | -30°C~50°C Phase(L) brown, + Power supply(l)_|
Input voltage 100-240V/AC Neutral) blue Power supply(N)
H: F ;
Frequency - a 3. Power supply input wire pass through the cut hole, accord -
Color rendering index Ra>70 : .
ing to the table to connect the wire, and then the power supply
Installation instruction ; a . a
Specification table placed = the back of the ceiling appropriate position, and
ensure it not drop.
Type Power | cer | We'sht | Dimension (mm) .
W) (9) 4. Ensure the luminaire is duly supported by framework and
'YPL6060040W k i ; -
——_ 40_| 6500) a en subsequently energize the circuit,
L 2. —
595. I |
| 3. 4.
595