Professional Documents
Culture Documents
Portate Gas Scarico PDF
Portate Gas Scarico PDF
Exhaust Flow
Guide
Engine Data Engine Exhaust Flow Rate Calculation
The data shown in this section Exhaust flow rate may be calculated using the following formula. Exhaust tem-
is a collection of information perature and intake airflow rate must be determined to calculate the exhaust
flow rate. Exhaust temperature and manufacturers maximum backpressure
gathered by Donaldson from
may be approximated using the chart below.
various sources and should be
used for estimating.
( Exhaust Temp. (°F) + 460
540
)x Intake Airflow
(CFM) = Exhaust Flow
( )x
MTU of North America
Navistar
Nissan
Engine Size (CID) x RPM Volumetric
Efficiency
= Intake Airflow
(CFM)
1728
Perkins
Renault
Same Volumetric Engine volumetric efficiency ratings are best obtained from your engine manufacturer.
Teledyne Engines operating with electronic controls could have volumetric efficiency ratings of
Volkswagon
Efficiency more than 2.0. Airflow on these engines should be verified by the engine manufacturer.
Volvo
Waukesha 4 Cycle GAS Engine Naturally Aspirated = .70 - .80
White Eng
Yanmar 2 and 4 Cycle DIESEL Engine Naturally Aspirated = .90
Turbo* = 1.50 - 3.00*
* If VE rating is not available, Donaldson recommends using the highest
value to insure proper airflow.
www.donaldson-filters.com
www.donaldsonexhaust.com EngineEngine
Air Cleaners,
ExhaustAccessories
Temperature& Service
& Flow Guide
Parts •
Engine Exhaust Temp/Flow Guide