Professional Documents
Culture Documents
Huawei AMB4519R5v06 3165 Datasheet PDF
Huawei AMB4519R5v06 3165 Datasheet PDF
2MXXX-690-960/1695-2200/1695-2200-65/33/33-17i/19i/19i-M/M/M-R
EasyRET Hybrid Penta-beam Antenna with 5 Integrated RCUs - 2.6m
Antenna Specifications
Electrical Properties
690 - 960
Frequency range (MHz)
690 - 803 790 - 862 824 - 894 880 - 960
Polarization +45° , -45°
Electrical downtilt (°) 0 - 10 , continuously adjustable
at mid tile 15.8 16.2 16.4 16.6
Gain (dBi)
over all tilts 15.7 ±0.5 16.0 ±0.5 16.3 ±0.5 16.5 ±0.5
Side lobe suppression for first side
> 16 > 16 > 16 > 16
lobe above main beam (dB)
Horizontal 3dB beam width (°) 65 ±4.0 63 ±4.0 62 ±3.0 60 ±3.0
Vertical 3dB beam width (°) 8.5 ±0.7 7.8 ±0.5 7.5 ±0.5 7.2 ±0.5
VSWR < 1.5
Cross polar isolation (dB) ≥ 25
Interband isolation (dB) ≥ 30 (690 - 960 // 1695 - 2690)
Front to back ratio, ±30° (dB) > 23 > 23 > 23 > 23
Cross polar ratio (dB) 0° > 17 > 17 > 17 > 17
Max. power per input (W) 500 (at 50℃ ambient temperature)
Intermodulation IM3 (dBc) ≤ -153 (2 x 43 dBm carrier)
Impedance (Ω) 50
Grounding DC Ground
Electrical Properties
2 x (1695 - 2200)
Frequency range (MHz)
1695 - 1880 1850 - 1990 1920 - 2200
Polarization +45° , -45°
Electrical downtilt (°) 2 - 12 , continuously adjustable , each band separately
at mid tile 17.2 17.6 18.0
Top
over all tilts 17.0 ±0.6 17.4 ±0.5 17.8 ±0.5
Gain (dBi)
at mid tile 17.6 18.0 18.5
Bottom
over all tilts 17.4 ±0.6 17.9 ±0.6 18.3 ±0.6
Side lobe suppression for first side
> 15 > 15 > 15
lobe above main beam (dB)
Horizontal 3dB beam width (°) 34 ±3.0 32 ±3.0 30 ±3.0
Vertical 3dB beam Top 7.6 ±0.7 7.1 ±0.7 6.6 ±0.7
width (°) Bottom 7.6 ±0.7 7.1 ±0.7 6.6 ±0.7
VSWR < 1.5
Cross polar isolation (dB) ≥ 25
Beam to beam isolation (dB) ≥ 18
Interband isolation (dB) ≥ 30 (690 - 960 // 1695 - 2690)
Front to back ratio, ±30° (dB) > 26
Cross polar ratio at boresight (dB) > 15
Max. power per input (W) 250 (at 50℃ ambient temperature)
Intermodulation IM3 (dBc) ≤ -153 (2 x 43 dBm carrier)
Impedance (Ω) 50
Grounding DC Ground
2685
1837
Frontal : 1290 (at 150 km/h)
Wind load (N) Lateral: 350 (at 150 km/h)
Rear side: 1075 (at 150 km/h)
Max. operational wind speed (km/h) 200
Survival wind speed (km/h) 250
Connector 10 x 4.3-10 Female
Connector position Bottom
Accessories
Item Model Description Weight Units per antenna
* Please confirm the AISG protocol of primary station is compatible with RET antenna protocol interface. The protocol of RET antenna software
interface is switchable between AISG 2.0/3GPP and AISG 1.1 with a vendor defined command. For more details about protocol switching
function, contact Huawei before system installation.
Standards: EN/IEC 60950-1(Safety), EN/IEC 60950-22(Safety – Equipment installed outdoor),EN 55032 (Emission),
EN 55024 (Immunity), ETSI EN 301 489, FCC Part15, ICES-003
Certification: CE, FCC, IC, RCM, RoHS, REACH, WEEE
HWMxxx…..…r1
HWMxxx……Bb3
Bb1 Bb3
HWMxxx……Tb4
r - Red b - Blue r1
T - Top array B - Bottom array
NOTE
1. Facilities, such as towers and poles, must bear the weight and wind load of antennas.
2. HUAWEI ‘s standard brackets and accessories must be used for any installation.
3. The antenna working environment must meet the requirements specified in the datasheet.
4. Only qualified personnel are allowed to perform installation. Installation tools and procedures must conform to
requirements described in the antenna installation guide.
Huawei Technologies Co., Ltd. Bantian, Longgang District, Shenzhen 518129, P.R.China www.huawei.com/antenna
Any previous datasheet issues become invalid. 3 Issue: 2018-11-02