SravoanoSraciicenios sox COnsrRLCNON 0
Marrexanceo» Route ayo fess (SCA)
Matera Det
Table 1701-2 - Preferred Grading for fine Aggregate for Conerste
PERCENTAGE PASSING
| mm Zone Zone2 | _Zone3
10 100) 100 | 700
5 si-too | orto. | si-to0
2.36 sovs | 5-100 | 85-100
his so-70 | 53.90 | 15-100
soo] issa | 3559 | ao.r9
300) 5.20 30 240
150} e-10 ono | oo
Table 1701-3 - Preferred Grading for allin Aggregate for Concrete
lara THERCENTAGE PASSING
aa in aT 79.
7 Nomina! Size_| Nominal Size
7 ToD :
35 95.100 100
20 8-82 2-100
s 25.50 35055
soo | 30 10.35
150 6 06
Note, = nf 7
The equivalent ASTM sieves as given in Sub Section 107 may also be used
1701.3. Aggregate for the construction and maintenance of Bases and Surfacing of
te Pavements (Chapters 400, 500, 1100 and others)
General Requirements
The coarse aggregate (aggregate substantially retained on Smm sieve) used for
Road Bases and Surfacing shall be crushed rock from an approved quarty and shal
consist of clean hard sound durable particles of angular shape and rough surface texture
They shall be free from weathered, soft, laminated or elongated pieces, deleterious
matter and shalll be free from clay and excess dust
The coarse aggregate shall conform to the following requirements
Unbound Basecourse Aggregates (Chapters 403, 404, 405, 406, 408, 410 and
others)
1 The Aggregate Impact Value (AIV) determined as specified in BS-812
shall not be more than 30%.
2. The flakiness index of the coarse aggregate when determined by the sieve
method described in BS-812 shall not exceed 35%.
437
SECOND DITION TUNE Tae To Corsraan Tg ad eTopien TOT AT