sarmac
Safety Road Materials Co.
Limited Liability Co, Sagan dalplas ls 255
TECHNICAL DATA SHEET
Road Marking Glass Beads
PRODUCT
sarmac Road Marking Glass Beads B.S 6088
Manufacturer
sarmac 1 Safety Road Materials Co. , CPC Industrial compound, Zone (D) , Str. no. (2), Factory
no,(17), 6th October , Egypt Tel. : +( 202) 386 42007, Fax : + (202 ) 386 42008 -P.O.Box : 105 /
12573
USES,
Adding Retro-reflectivity to road marking paints and it’s a major factor in increasing road safety
in a very commercial way.
TECHNICAL DATA
Glass
‘Clear
Specific weight approx. 2.5 g/em3.
Bulk weight ‘approx. 1.6 ke/L.
Reflective Index 15
Roundness >80%
Coating Silicon
GRANULOMETRY B.S 6088 CLASS A
‘Cumulative Retained mass %
SIZE: Min Max
>1180 0 3
850 : 3 20
25 6 95
<425 0 10
Page 1 of 2
ae SN ella gg ot AT GIs VL OPVYOVE sage (Vek) TEATE A sath (Fk) TRATES Wt ot
Tol: (+202) 3864 2007, Fax: (+202) 3864 2008 P.O.Box: 105112573 Address : CPC Industral compound, 6th October, Egypt
wwwsarmacogyptcom Email : ofice@sarmacegypt.comsarmac
‘Safety Road Materials Co.
Limited Liability Co.
SJL jw
Gyball algal Aodbull AS
Bupaae Sulgtaan ld Syd
GRANULOMETRY B.S 6088 CLASS B 2 |
Cumulative Retained mass %
apie Min 3 Max
>850 al o 5
600 5 20
300, ae Sa
180 30
=180 i 15,
DANGEROUS SUBSTANCES
i ACCORDING TO | UNIT VALUE MIN MAX
Content As BS 6088 ppm Class B - 200
Content Pb BS 6088 ppm Class B 200 |
Content Sb BS 6088 ppm Class B 200 |
CAPTION ON THE PRODUCT
> Year of production
> BS 60888 CLASS A or CLASS B standards
> Batch number
> Sarmac Glass Beads : 25 kgs paper bags
‘This Technical data sheet was printed on 1/4/2015
Information contained in this publication or as otherwise supplied to Users is believed to be accurate
and is given in good faith, but itis for the Users to satisfy themselves of the suitability of the product for
their own particular purpose. Sarmac gives no warranty as to the fitness of the product for any
particular purpose and any implied warranty or condition (statutory or otherwise) is excluded except to
{he extent that exclusion is prevented by law. Sarmac accepts no liability for loss or damage
(other than that arising from death or personal injury caused by defective produc, if proved), resulting
from reliance on this information, Freedom under Patents, Copyright and Designs cannot be assumed
Page 2 of 2
ete ASN ella ge gt gee Gabe Usa VOI OVE re (Tea) IPATEV SA: gust (Wed) MANET 2 Salt
‘Tel: (+202) 3864 2007 F:
Emall : office@sarmecegypt.com
(+202) 3864 2008 P.O.Box : 105/12573 Address : CPC Industrial compound, 6th October, Egypt
‘www.sarmacegypt.com