Professional Documents
Culture Documents
NEW!
Technical data
ROC L6 Recommended hole-diameter range:
COP 34 92-105 mm 3 5/8"-41/8"
COP 44 110-130 mm 4 5/16"-51/8"
COP 54 134-152 mm 5 1/8"-51/2"
The ability to drill in different angles and to accurately set Drill tube diam.. 76/89/102 mm 3"/31/2"/4"
the inclination and control the depth of the hole Drill tube length 4 m 13 ft
Hole Depth, max. 36 m 118 ft
contributes to the overall economy of the operation.
Compressor
Atlas Copco, screw type
compressor XRV 9
Working pressure max. 25 bar 363 psi
FAD 295 l/s 625 cfm
Engine
Caterpillar, water-cooled
diesel engine, CAT 3176 ATAAC
Rating at 2000 rpm 272 kW 365 HP
Fuel tank
Total capacity 775 l 200 Usgal
Feed
Feed length, total 7550 mm 25’
Travel length 4600 mm 15’
Feed extension 1 300 mm 4’3"
Illustrations in this brochure may show equipment with optionel extras. Specifications and equipment subjects to change without notice. Consult your Atlas Copco sales company for specific information.
Feed rate, max. 0.92 m /s 180 ft /min
Feed force, max. 20 kN 4496 lbf
Tractive pull, max 30 kN 6744 lbf
Tramming
Tramming speed, max. 3.4 km /h 2.1 mph
Traction force 110 kN 24 729 lbf
Hill climbing ability 20°
Track oscillation ±10/8°
Ground clearance 405 mm 16"
Transport dimensions
Weight, optional equipment
excluded, approx. 18480 kg 40 660 lb
Flexibility and mobility are two important factors for a Width 2 490 mm 8’2"
smooth operation. The boom and feed movements of ROC Length 12700 mm 36’11" (feed in forward position)
Height 3 150 mm 13’1"
L6 gives the rig excellent flexibility for vertical, horizontal
Length 10.300 mm 33’10" (feed dumped on canopy)
and angle drilling. Height 3 995 mm 13’1"