Professional Documents
Culture Documents
Wetted materials Machined parts: 316/316L stainless steel /NACE compliant and Kevlar®
threaded bushng
All other metal parts: stainless steel / NACE compliant
Sealing material: PTFE/Neoprene rubber standard
Regulator seat material: PFA
Membrane: inert
geniefilters.com
Analyzer Sampling Solutions > Moisture & Corrosion Control > Knowledgeware
Model Numbering & Additional Part Numbers
Your model number is determined by your specific needs. Choose options below.
Sealing material 0 = PTFE/Neoprene rubber J = RGD resistant HNBR (other materials available upon request)
Membrane type 6 = Type 6/BTU 7 = Hi-flow Backed
Process connection 3 = 3/4” NPT 4 = 1” NPT 6 = 1.5” NPT (contact factory for flanged options)
Outlet pressure range (psig) 00 = 0-25 01 = 0-50 02 = 0-100 03 = 0-250 P4 = 0-500 09 = 0-10
Regulator outlet port 1 = 1/4” MNPT to 1/8” tube connector 4 = 1/4”FNPT (standard)
Probe insertion length (L) 8, 12, 18, 24, 36, 48 inches
How to build the model number: Spare Parts & Accessories (sold separately)
Sealing material replacement* - Part # 75X-570
755 SS
Complete membrane assembly replacement*
Sealing material Part # 75X-CMA-506 (contains 1 complete assembly)
Membrane type Regulator seat cartridge assembly replacement*- Part # 755-771SS
Process connection (Use for serial #48766 and greater. Contact factory for others.)
Outlet pressure range Speed Wrench for faster installation- Part # ACC-SW
Regulator outlet port
Probe insertion length Manifold with pressure gauge, ball valve, and relief valve - for ordering
information, refer to the Genie Probe Regulator Accessory Manifold
product sheet
KOZY insulated probe and valve covers- for ordering information,
refer to the KOZY Assemblies product sheet
Threaded flange - contact factory for your specific requirements
*These parts contain standard seal materials. Contact the factory if non-standard seal materials are needed.
Not designed for external fire. Prior to use in a system, a properly sized relief device is to be installed which limits the use to 110% of the MAWP.
Dimensions
Uninstalled Installed
4.3”
0.4”
INSERTION DEPTH
MARKING NUTS
7.6”
1/8” NPT PORT
NPT PROCESS 1 - 3/8” WRENCH FLATS
CONNECTION
A
6.4”
5.6” 0.7”
1.5”
Local Distributor A+ Corporation is the leader in Analytically Correct™ Sample Extraction and Conditioning Systems.
Contact us for expert product application assistance.
sales@geniefilters.com > 225.644.5255 > Fax 225.644.3975
41041 Black Bayou Road, Gonzales, LA 70737 An ISO 9001:2008 Certified Company
U.S. Patents 6,904,816; 7,004,041; 8,522,630; 9,200,986. Genie®, Genie® Membrane Technology™, Genie® Membrane Probes™, are trademarks or registered trademarks of
A+Corporation, LLC. All other referenced trademarks are the property of their respective owners. © 2013 A+ Corporation. All rights reserved. SCC-755-PS_0116