neral purpose outputs (GPO). R
be powered from an external 12Vde
r can be powered directly from a Power-
E) or Power-over-Ethernet-Plus (PoE+)
of additional information regarding the installation, configuration and proper use of
is product refer to the following:
‘+ SMS User Guide, P/N 9600-0429
+ EN-2DBC Installation Guide, P/N 9600-0630,
For additional information on how to configure Level IV line security refer to the following:
+ EN Device Configuration Guide, P/N 9600-0662
For information on UL294 compatible readers refer to the following:
M2150 Design Guide, P/N 9600-0420
io pws ted Tae over
4 JEcnnect ing the Main PCB
Ste ra heesbee ee
Typical input NO or Poe ratalatone
inputs a8 aloes
Connection to. std UL 296 o UL 603
Ensure OV is connected
‘oeno CJ
Note:
‘The General Inputs
Door Monitor and
Est Benvest cao
ad open crests by
‘dang terminating
Tesitrs othe end of
the eae
Cptona eonmecton to AC MON output eternal
‘owe supply. (4S Power Supplies On)
{qh ooo
Exez086 istalion th eee,
ee = —iben
Se
Exit Request (options!)
sa
ono (785)
re
‘Wiegand Reader
[ecee|[ecccee]
‘Ground
Red Le)
Data
Data
| oeentso—
Escaneado con CamScannerWARNING: Incorrect con
permanent damage the board.
Note: UL compliance requires power
rnon-power-imited wiring o be separated)
0.28" (7mm).
(eeee]
2
iP
(eptena)
Al kd viring terminal
block connections are
Class 2 power limite
ony”
“GND (TES)
ee
‘Ground
aa
a
ae
e008
Conn to Nermaty Open (NO) 0
erally Closed (NC) 5s appropiate
‘2TOmA max (12Vde),
z
:
Pane
I ne
De | lover
o \J
'
Notes: ri
4) Consult local AHJ (Authority Having Jurisdiction) when installing access control readers and locking mechanisms to any
Portal in an egress path.
2), The use of Fail Closed / secure configuration shall be determined by local building codes and the local AHJ.
Wiring methods shall be in accordance with NEC (National Electrical Code) ANSIINFPA 70.
'devices described in these instructions may not be applicable for sites requiring UL compliance. Please refer to
Guide for details of the controllers, modules and features that have been UL tested for use with this d
, employ APC PNET1GB surge suppressor between the networ
DBC as possible.
Escaneado con CamScannerEscaneado con CamScanner