5.0 VOLTAGE RECOMMENDATIONS
International Standards
NACE SP0188 derived table
Table 1. below is derived from NACE standards and
should be used as a guide only.
New protective Coatings on Conductive Substrates,
Table 1
‘Suggested for High Voltage Spark Testing
Total Dry Film Thickness | Suggested Inspection
(um) (eit) “
7200 to 300 Bto 11 1,500
30010400 | 121015 2,000
40010 500 | 161020 2,500
8000 1,000 | 210.40 3,000
7,00010 1,400] 4110.55 4,000
1,400 t0 2,000] 56 to 80 6,000
2,000 10 3,200| 81 to 125 10,000
3,200 10 4,700 | 126 to 185 16,000
‘The above table should be taken as a GUIDE only.
Itis recommended that the whole of this standard be
used.
International Standards
NACE RP0490 and RP0274 derived tables
Tables 2 & 3 below are derived from NACE standards and
should be used as a guide only.
Thin Film Pipeline Coatings
(FBE)
Table 2
KV Values from NACE RP0490 kV Values from NACE RP0274
mm kiloVorts mm kilovorts
0.260 1.650 0st 6
0.280 4.760 079 7
0.300 1.800 16 10
0.330 4.900 24 2
0.360 1.950 32 4
0.380 2.050 40 16
0.410 2.100 a a
0.510 2.350 = bad
0.640 2.650 a iw
19 34
0.760 2.900
‘The above tables should be taken as a GUIDE only. It is.
recommended that the whole of this standard be used.
[ALLOW AN ADDITIONAL 200 VOLTS IF THE NEON IN THE PROBE HANDLE IS IN USE
[ALLOW AN ADDITIONAL 200 VOLTS IF THE NEON IN THE PROBE HANDLE IS IN US|