Professional Documents
Culture Documents
The new Donaldson Clean Liquefied Petroleum Gas (LPG) Filter provides a convenient,
effective way to deliver clean LPG to your equipment and protect sensitive precision
components including pumps, meters, valves, nozzles, heat exchangers, regulators,
compressors, control systems and engines.
LPG can become contaminated as it travels from the refinery, through pipelines,to bulk
storage and finally to your bulk storage tank. Common LPG contaminants include iron-
based mill scale, a corrosion byproduct of the aging LPG infrastructure and byproduct of
system fabrication. The Donaldson Clean LPG filter is highly efficient and removes 99%
of harmful particulates 0.5 micron and larger.
Donaldson LPG filters are constructed of high phosphorus nickel plated steel to provide
corrosion and wear resistance. Filter designs meet or exceed the NFPA 58 guidelines for
pressure and material of construction requirements.
The filter heads, housing and filter element are sold separately.
SPECIFICATIONS
Particulate Filter
4” 5” 5”
Particulate Particulate
Particulate PDF5CP PDF5CP1
Complete Assemblies
PDF4CP Carbon Carbon
PDF5CC PDF5CC1
LPG Filter Heads P577043 P575844 P578670
Flow
Carbon Filter
Particulate Filter
Pressure Relief
Pressure Gauge
INSTALLATION MAINTENANCE
• The piping and filter system should be installed by qualified individuals. • Change filter element when flow slows to
• Piping, valves, hydrostatic reliefs and other system equipment should be an unacceptable level
installed following guidelines such as NFPA 58 and/or local regulations. • Housing is permanent, do not discard
• Material flow through the spin on head and filters should be as indicated on • Always discard original housing o-ring
the head. Improper material flow could result in damage to the filter system and replace during element replacement.
and equipment. Apply oil to seal prior to installation.
• Filters should be installed vertically or almost vertical, but not horizontal.
• Filter should be properly installed and used as intended.
• Seal all NPTF threads with appropriate sealant.