Professional Documents
Culture Documents
ReadMe English
ReadMe English
Contents
1. Introduction
2. System Requirements
3. Cautions, Limitations and Restrictions
1. Introduction ---------------------------------------------------------------
Follow this procedure to install the printer driver for Windows software
applications.
<Trademarks>
Microsoft and Windows are trademarks of the Microsoft Corporation in the
United States and other countries.
The names other companies and products in this document are registered
trademarks of their respective companies.
The following hardware and software are recommended for this printer driver:
Software:
Microsoft Windows 7 64-bit edition, English edition
Microsoft Windows Server 2008 R2 64-bit edition, English edition
Microsoft Windows Server 2008 64-bit edition, English edition
Microsoft Windows Vista 64-bit edition, English edition
Microsoft Windows Server 2003 R2 Standard 64-bit edition
/Enterprise x64 Edition, English edition
Microsoft Windows Server 2003 Standard 64-bit edition
/Enterprise x64 Edition, English edition
Microsoft Windows XP Professional 64-bit edition, English edition
(Note)
- For the Windows OS, use the latest version of Service Pack.
Printers:
Canon imagePROGRAF iPF710
Canon imagePROGRAF iPF720
Canon imagePROGRAF iPF810
Canon imagePROGRAF iPF820
- If the software application supports print copies, you can set up with
either the application software or the printer driver.
- When setting scaling with an application, make sure the printer driver
scaling is set to 100%.
- When printing reduced scaling color image data, 1 dot wide lines and points
may not be printed.
- Some applications may not print lines with almost horizontal angles
correctly. If this occurs, redraw lines horizontally.
- When binder printing with the Microsoft Binder, click off the check box
for executing binder printing as one job. Each print job will be processed
as a separate print job.
- For some applications, watermarks may print incorrectly for the first
printing.
- If you change the printer name in the General sheet of the printer driver's
Properties dialog box, Profiles registered in the print driver become
ineffective, so store your customized settings in a file before changing the
printer name.
After changing the printer name, load the stored file.
- When using a printer connected with USB, do not use Standby mode.
You can set Standby mode in Power Options in Control Panel.
- With Microsoft Excel, when Collate has a check mark and you perform
multiple sheet printing or Entire workbook printing with different
printing settings for each sheet, if you perform Page Layout Printing,
the results may not be those intended.
- When there is a large volume of print data, the printer may time out during
printing and printing may not be possible. If this occurs,
open the Advanced sheet in the printer driver Properties dialog box and
tick the Start printing after last page is spooled checkbox in Spool print
documents so program finishes printing faster.
- Thin line, gradation etc. printing may not be possible. If this occurs,
open the printer driver's Properties dialog box from Print in the
application software's File menu, and try printing following the steps
below.
1. Remove the check from Open Preview When Print Job Starts in the
Main sheet.
2. Remove the check from Page Layout in the Layout sheet.
- When there is a large volume of print data, the printer may take time out
during printing, and printing may not be possible. If this occurs, extending
the Job Time Out set time with the printer's operation panel may enable
printing.
- You may not be able to print data for large size media with
Adobe Illustrator and other software. If this occurs, try printing
after performing the following.
- Open the Main sheet and untick the Open Preview checkbox.
- Increase the amount of memory allotted to virtual memory.
- Place or remove a check from the ON/OFF check box in Bitmap Printing
in the Print dialog box when using Adobe Illustrator.
- When installing this software from the installer, if you fail to follow the
screen instruction to restart your computer, Microsoft Office may operate
incorrectly.
If this occurs, restart your computer.
- If one printer is used with both USB and network connection, please install
the Canon imagePROGRAF Status Monitor.
- Color settings dialog box can be performed for each object. However,
with some software applications the print results may not be what you
expect after text and graphic data handling.
- When printing data that includes an extremely large image from a computer
with little available memory, it may take time to print, a portion of the
image may be missing, or it may otherwise not print properly.
If this occurs, try printing after performing the following.
- Increase the amount of memory allotted to your computer.
- Increase your OS's virtual memory.
- If you install Point and Print, the "Canon imagePROGRAF Preview" function
cannot be used.
- If you used Photoshop for printing, tone jump may occur in the gradation
of monochrome photographs.
- Stamps and page borders may not be printed correctly when the following
Print Quality settings are combined with large paper sizes:
- The installer does not support Unicode. The installer may not operate
correctly if Unicode is used for a printer's or shared printer's name.
If the installer does not operate correctly, try the following.
- Change the printer name.
- Install the printer driver from Add Printer.
- Images may not print centered in the middle if you have checked the box
for Center Image in the print preview window and have performed printing
with Photoshop CS3. If you are unable to print, click the Page Setup button
in the Photoshop print preview window, and print after making print settings.
- Data created with Microsoft Word may not print properly when printing with
the Enlarged/Reduced Printing or Borderless Printing settings. If this
occurs, try printing after performing the following.
- Open the folder of the printer from the Start menu, right-click
the printer, and select Printing Preferences. Set Page Size,
Enlarged/Reduced Printing, and Borderless Printing from the Page Setup
sheet, and start the application.
- Open the Page Setup dialog box of Microsoft Word, and close it with OK.
- After setting the printer driver, close the Print dialog box without
proceeding to print. Open the printer driver settings window once more,
close it with OK, and then proceed to print.
- You might not obtain the desired printing results in some cases
if Automatically switch paper sources (paper size priority) is selected
when you are using a device that supports Automatically switch
paper sources (paper size priority) in the Device Settings sheet.
In these cases, clear the Automatically switch paper sources
(paper size priority) check box.