Professional Documents
Culture Documents
26-06-2020 Sample Hammer Test Plinth Analisys
26-06-2020 Sample Hammer Test Plinth Analisys
9 33 35 #DIV/0!
10 35 36 #DIV/0!
11 X X #DIV/0!
12 X X #DIV/0!
13 X X #DIV/0!
14 X X #DIV/0!
15 X X #DIV/0!
16 X X #DIV/0!
17 X X #DIV/0!
18 X X #DIV/0!
19 X X #DIV/0!
20 X X #DIV/0!
Average 35 35 #DIV/0!
21 0 0 0
Additional
22 0 0 0
23
24
25
Average after Additional 18.0 17.0 0.0
Measurement
Estimated Strength
10.0 (NO) 8.9 (NO) (6.3) (NO)
F(N/mm2)
Average
4.2 (NO)
(N/mm2)
Each location 85% or more of σ ≧ 29.8 N/mm2
Design Criteria
Average no less than σ ≧ 35.0 N/mm2
Note 1: Measured rebounds which are deviated from the average more than ±20% shall be marked "x" in the column of
"Reject". Those measurements shall be replaced by the same number of additional measurements.
22 0 0 0
23
24
25
Average after Additional
Measurement 0.0 0.0 0.0
Estimated Strength
(6.3) (NO) (6.3) (NO) (6.3) (NO)
F(N/mm2)
Average
(6.3) (NO)
(N/mm2)
Each location 85% or more of σ ≧ 29.8 N/mm2
Design Criteria
Design Criteria
Average no less than σ ≧ 35.0 N/mm2
Note 1: Measured rebounds which are deviated from the average more than ±20% shall be marked "x" in the column of
"Reject". Those measurements shall be replaced by the same number of additional measurements.
Dimensional check
Detection of R-bar