You are on page 1of 1

Repair Procedure for Ceramic Wall Tile

1. Removal of crack wall tiles including tile adhesive & installed gypsum boards
2. Check the stability &/or stud framing supports
3. Put additional horizontal & vertical stud wherever required
4. Install new gypsum board & apply joint tape at the edge connection of board
5. Apply 2 coat of waterproofing
6. Install new ceramic wall tiles
7. Install tile grout

Removal of tiles & gypsum board Installation of vertical &/or horizontal stud new gypsum board, waterproofing & tile installation

You might also like