S NATIONAL OILWELL oneconenavsenvees im
CERTIFICATE OF COMPLIANCE
NATIONAL OILWELL —- DRECO.
PROJECT: PPL HULL 2011 SEATANKERS
SERIAL #: 304
W.O. # 22498
MODEL: D3000 AC DRAWWORKS
P.O. #: 4500035048.
National Oitwell - DRECO hereby certifies that the listed Equipment has been
fabricated to API Specifications 7K, AISC 9™ Edition, International Marine
Organization (IMO) (1989): Code for the Construction and Equipment of Mobile
Offshor Drilling Units (MODU). ABS MODU 2001. ABS Rules for Building and
Classing Steel Vessels and is in full Compliance with all applicable codes,
Standards and Specifications latest editions as required by the Customer
Contract and NOI — Dreco Quality Plan and Inspection and Test Plan.
Date’ JANUARY 23, 2007.
Quality Control Marcel Beaudoin
Signature Lec® warionat onweu varco
TH,
EC DECLARATION OF INCORPORATION
Directive: Machinery Directive on Machinery Safety, 98/37/EC
Conforming Machinery: Induction Motor
(Subassembly) Model #
Serial #
‘Manufacturer: National Oitwell Varco
500 Industrial Blvd,
‘Sugar Land, TX 77478
USA
We hereby deciare that the machinery described above is intended to be incorporated into ather
machinery and must not be put into service until the relevant machinery into which it is to be
incorporated has been deciared in conformity with the essential health and safety requirements of|
Council Directive 98/37/EC on the approximation of the laws of the Member States relating to the
safely of machinery.
Date of Issue:
Signed:
National Oilwell Varco
Signatories: Bob Stephens Greg Cervenka Bruce Moats Forrest Martino
QAMenager Chief Engineer Project Engineer Project Engineer
‘Specifications with Which Conformity is Declared:
Essential Health and Safety Requirements of Annex 1 of the Machinery Directive
Harmonized Standards Referenced or Applied:
BS EN 292-1:1991 Safely of Machinery — Basic concepts, general principles of design Part
4: basic terminology, methodology
Bs EN 292-2:1991 Safety of Machinery ~ Basic concepts, general principles of design Part
2: Technical principles and specications
BS EN 294:1992 Safely of Machinery — Safely distances to prevent danger zones being
reached by the upper limbs
BS EN 60204-11998 Safety of Machinery ~ Electrical equipment of machines Part 1
General Requirements
EN 6079-14 CENELEC — Electrical apparatus for explosive gas atmospheres ~ Part
14:Electrical installations in Hazardous Areas (other than mines)
1@* weriowa o1weLt vARCO
ais |e ie Te
G swore | v.tones | usctno | EC DECLARATION OF INCORPORATION
A ae fee EG DECLARATION OF CONFORMITY
REY, DATE BY TAPP,
Da BY” SBMS | CHK BY: ore | MVD BY 0S | OWE NO. Re.
N. Jones B. Moats F, Martino FORM 487 sartor2|
6-4@) wavionat ouweELL VARCO
EC DECLARATION OF CONFORMITY
Product: OM Serie Induction Motors for use with Variable Frequency Drives
Manufactured By: National Oilwell Varco in Sugar Land, Texas, USA
Comply With: CE Marking on the rating plate per ATEX Directive 94/9/EC.
Compliance: The equipment complies with the health and safety requirements,
relating {0 the design and construction of equipment and protective
systems intended for use in potentially explosive atmospheres, by
application of the following harmonized standards:
To ENS0O19 Electical Apparatus for Potentially Explosive
“Atmospheres ~ Increased Sefely 'e' and ENSOO14 Electical Apparatus
for Potentialy Explosive Atmospheres — General Requirements
Cortified By: ‘TRL Compliance Services LTD. Under certification files:
‘TRLOSATEX31082X cie32 Range
‘TRLOSATEX31083X M628 Range
NOTE: The 'X’ suffix indicates the equipment is subject to special
conditions for safe use.
Notifying Body of Product
Quality Assurance: DNV (Det Norske Veritas) Norway Code: 0575
markings: CEG 2G EEX el TS Tamb.-4ot0+45%C |
SSS org th 2S Ae een dete steed
Explanation of Markin:
exe: Increased Safety (EN50019 / EN60079-7)
Group il Surface: Not mining underground
Category 2: Equipment may be installed in Zone 1 of Zone 2 areas
Temperature Class T3: 200°C maximum surface
G: Atmosphere surrounding the motor explosive gas
0575: Code of Notifying Body (DNV)
‘Special Conditions for Safe User
‘This motor requires the following two peripheral measures to maintain the safe
temperatures of Increased Safely ‘e’ protection for a maximum 200°C surface.
a) This motor requires Thermal Protection.
b) This motor requires forced air during operation providing specified SCFM.
2 Do not open when energized. All components, including anti-condensation heaters, must
be de-energized before opening access covers or enclosure covers,
3 Use motor only with Variable Frequency Drive designated on nameplate. Not intended for
across-inewine start.
4. ‘The responsiblity for ensuring safe operation lies with the end-user.
Important safety information is contained in the instalation, Operation, and
‘Service Manuals; read and understand this information prior to installing or
Using this equipment.
DHE NO,
FORM 487 swr20e2
65