Professional Documents
Culture Documents
==================================================
This program prints: payee, amount, word amount, date, memo, signature and extra
info (i.e. DL# or phone#) onto a personal check. Only the standard checkbook checks
are supported (6 x 2.75).
Built in Layout Editor enables support for wide range of printers and checkbook
check layouts.
----------------------------
***Clean Installation
------------------------------------------
***Installation over an older version
---------------------------
***Setup of the program
If you have installed over version 3.5 and lower and all "clean" installs read on.
Important: Program sets its printer parameters, so please leave your windows
printer on default (i.e. 8.5x11 portrait).
After installing the program you will need to check the layout since the checkbook
checks come
in different shapes. Start the program and press 'Edit layout' button. To set
margins and check to printer alignment select 'Alignment' from the menu. Put a
clean sheet of 8.5 x 11 format into the printer and click 'Print sample'. Once the
page has printed tear-off a check from your checkbook and match it by placing the
sheet on white monitor (something like doctor viewing X-rays) and the check on top
of the printed area.
If any printout is off, you will need to adjust it in the Layout dialog.
You'll also see how your printer placed the check - I recommend using default
layout with printers
that have envelope slot in the center then placing check long-way (just like an
envelope).
With older printers you may need to set orientation to portrait (in layout editor)
and adjust the margins.
For center bin (dot matrix) set right margin to 1.25 and bottom to 0,
for fixed bin use 0 for both margins.
Go from there; try different settings and print sample again.
Another solution for printer with no (or too wide) envelope slot from Jay Smith:
"I recently came across your software program. Very nice! One problem I had was
sending my personal checks through my inkjet printer. The solution I found is to
use the "glue sticks" that are commonly available
from stationary and office supply stores. The glue used is very weak and doesn't
hold too well.
But it does very well to temporary hold a check to a 8x11 piece of paper long
enough to send through the printer.
Afterwards the check will easily peel off the larger paper with no damage."
Font support:
Fonts installed on your system in alphabetical order.
Please remember though, the default layout was designed with Arial 10
and if you wish to use any other font/size you may need to adjust the layout.
QMP:
In order to use QMP you must install Generic/Text Only printer on C:\FILEPORT.PRN
port.
If you don't know how to do this refer to QMP.htm or QMP.txt.
Note:
All .dat files from earlier versions are compatible with one exception --
Layout.dat from version 3.5 or lower. To fix it you need to readjust the layout in
layout editor and save it.
-------------------------------------------
****Features and Fixes in 2.0
-------------------------------------------
****Features and Fixes in 2.5
o Void check printing feature - enter "void" as payee and click print (do not edit
anything else) and confirm that check printed properly.
o Status bar help in layout editor and options dialog..
o Scanned signature support -- .bmp, .jpg, .gif, .wmf format. Max size of 200x65
pixels.
o Dialog color options
o Additional text printing
o Improved error handling.
o Major print bug fixed (thanx Milt)
-------------------------------------------
****Features and Fixes in 3.0
o Printing of Check Register now possible
o Tab indexing fixed
o Toolbar
o Check # now advances if check printed improperly also this check appears as void
in register (thanx Richard).
o 'Program terminating with GPF when Enter pressed' bug fixed (thanx Milt)
o Checkbook font install fixed (system restart needed after installation).
o Installer now installs faster
o Ascending/descending sorting of records in Register
o Removed readme from option dialog, you'll have a shortcut on start menu
o Automated void of check record from the dialog (no more messing with notepad)
o Popup menu in layout window
o Improved function to handle list view in Check Register dialog
o Fixed bug where program will remind you that the scanned image wasn't found even
if it was unchecked.
o The Enter key now works as Tab
o Shortcuts for toolbar buttons:
ALT-P -> Print
ALT-O -> Options
ALT-R -> Register
ALT-L -> Layout
ALT-X, ALT-Q -> Quit
o Payee list now extended from 12 to 20 entries
o Fixed Word Amount width changing as the amount changes.
If installing over previous version, You need to adjust the default layout in
"WordAmt X End" from 4.400 to 4.750 or so.
-------------------------------------------
****Features and Fixes in 3.5
o UK currency support
o Editable (fixed) payee list
o Auto complete
o Quicken/Money color bars
o Custom color picker for main/color bars
o Popup menus in: register, layout, payee editor.
o Fixed some issues with sorting
o Fixed bug where a simple filename for signature image was not accepted
o Fixed dropdown arrow not "popping" back
o New shortcuts:
ALT-F -> Fixed payee editor
CTRL-P -> Paste selected record into the main dialog.
-------------------------------------------
****Features and Fixes in 4.0
-------------------------------------------
****Features and Fixes in 4.2
o New help file
o Payee Editor accessible from toolbar
o Fixed flooding of Editable payee List by the QMP
o Duplicate records are now skipped when adding to a Payee List
o Rewritten handling of options / Settings dialog
o Improved error handling
o Got rid of confusing Auto Payee List, records can now be added automatically to
editable payee list.
-------------------------------------------
****Features and Fixes in 4.3
o New date formatting, use with checks that have preprinted year (thanks Gus P.)
o Fixed "runtime error 483" with some printers (thanks Bill W.)
o Other minor fixes.
-------------------------------------------
****Features and Fixes in 4.5
o New: Requested feature "different font for each field" is now available.
o New: Use of Flex-grid makes the Layout Editor easier to navigate.
o Fixed: Blank records can no longer be added to Payee List.
o Fixed: Mishandling the amount in Payee List resulting in the first digit being
cut off.
o Fixed: While using "Paste" from Check Register sometimes the first digit of the
amount would be lost.
o UK users will now see "Cheque" instead of "Check" (per request)
o Security
o Other minor fixes.
--------------------------------------------
****Features and Fixes in 4.6
--------------------------------------------
****Features and Fixes in 4.8
--------------------------------------------
****Features and Fixes in 5.0
o Fixed: Adjust case now works properly (i.e. AT&T wont be changed to At&t) (thanks
Michael P)
o Fixed: QMP dialog not hiding on error
o Fixed: N/A in payee address stopped QMP printing with an error (thanks Yahqob M).
o Fixed: Balance dialog appearing twice on some systems.
o Fixed: Printing of a void check no longer prints signature.
o Fixed: Payee Editor no longer clears the checkbox for edited record
o Fixed: Uninstaller would loop endlessly on some systems.
o Fixed: Sometimes program wouldn't completely unload after a QMP error.
o Fixed: Balance miscalculation if higher than 999.99
o New: Support for foreign currencies
o New: Reference lines in Layout Editor
o New: Notes recording (additional info now saved from check to check)
o New: Record hand written checks in Register
o New: Quick date picking using the calendar control.
o New: Printer picker (thanks Mike P)
o New: Case adjusting for word amount.
o Other: Fixed some typos and small bugs, updated QMP instructions.
--------------------------------------------
****Latest features/bug fixes since v5.0 (build 2001)
--------------------------------------------
****Features/bug fixes v5.1 (build 2505)
---------------------------------------------------
Features and Fixes in version 5.5 (build 2922)
o New: Spanish and French (Canadian) language support for word amount printing.
o New: Carbon copy print, for users that have carbon copy checkbooks.
o New: Confirmation dialog can be disabled.
o New: Toolbars in Register and Payee Editor dialogs.
o New: Record backup in Payee Editor
o New: Exporting Register and Payee records to Excel comma delimited files.
o New: Printer dialog now shown for each print function if "Ask for print
destination" is set in Settings dialog.
o Fixed: Removed flat controls fixing the Resource Drain issue and problems with
Zone Alarm and Shooting Star
o Fixed: Endorse printed only one record on some machines.
o Fixed: Stub date wasn't a check date.
o Fixed: Delete function in Register was disabled at random.
o Fixed: Program would not print until restarted if printing was previously
cancelled or the "Ask for print destination" was changed.
o Numerous other small bug fixes/additions.
---------------------------------------------------
Features and Fixes in version 5.5 (build 3028)
---------------------------------------------------
Features and Fixes in version 5.6 (build 3330)
o New: Allow user to cancel printing from the confirmation box (if printer reset is
needed),
o New: Fileport is customizable,
o New: Support for checks with preprinted "/100" in word amount,
o Updated: Two new options for manual record adding: EFT and POS,
o Updated: Double clicking a payee in payee editor loads (pastes) it into the main
window,
o Updated: Max width for wallet checks extended to 6 1/8",
o Bug fix: When cancel is clicked from settings dialog (while a financial program
is set to start) this financial program loads,
o Bug fix: While printing records from register the "total printed" was wrong,
---------------------------------------------------
Features and Fixes in version 5.6 (build 3405)
o Fixed: "File not found" error (while printing via QMP) fixed.
-------------------------------------------------------------
Features and Fixes in Check Printer version 5.7 (build 3441)
o Upgrade: All editions: QMP Batch limit expanded to 99 checks from 15 previously.
o Updated: All editions: QMP rewritten. Now payee addresses and additional payee
names are filtered out. No more QMP errors caused by some payees in Quicken or
Money being sent with their addresses.
o New: All editions: New Canadian block date format MMDDYYYY is now supported.
Selectable in Settings/Locale. Please pick proper font in Layout Editor so that
the boxes are properly filled.
------------
***Credits
--------------
***Contact
E-mail:
check_printer@hotmail.com (make sure words Check Printer are present in the
subject line)
WEB:
http://www.printmychecks.com
http://checkprinter.2itb.com
http://wind.prohosting.com/jouster
DISCLAIMER OF LIABILITY.