Professional Documents
Culture Documents
QinQ VLAN Transparent Ethernet Services Configuration
QinQ VLAN Transparent Ethernet Services Configuration
1. With WebLCT, go to Interface Manager and configure the Ethernet ports encapsulation type to
802.1Q.
2. Under Interface Manager, configure the MW link IF board encapsulation mode to QinQ
3G & LTE Transparent Ethernet Services Configuration
3. Go to Ethernet Service Manager, QinQ Link, and create a Link with S-VLAN 200 for the 3G
services
4. On Ethernet Service Manager, QinQ Link, create a Link with S-VLAN 300 for the LTE services.
3G & LTE Transparent Ethernet Services Configuration
7. The service direction is UNI_NNI, the source Interface is the Ethernet port 1 and the Bearer Type
is QinQ Link
10. On Ethernet Service Manager, E-Line Service, créate a new LTE service
3G & LTE Transparent Ethernet Services Configuration
11. An ELine service must be created for each ehternet service required.