Professional Documents
Culture Documents
Technical Drawing S.B.A Building Option 3A 2020/2021: Room Example: Storeroom or A Wash Room!
Technical Drawing S.B.A Building Option 3A 2020/2021: Room Example: Storeroom or A Wash Room!
A
BUILDING OPTION 3A
2020/2021
CANDIDATES CAN USE THEIR OWN INITITIVE TO ADD TO THEIR DESIGN TO GET FURTHER
ROOM; EXAMPLE: STOREROOM OR A WASH ROOM!
USING APPROPRIATE LIMITS, LAYERS, TEXT STYLE, DIMENSION STYLE, AND MULTI-LEADER
STYLE COMPLETE THE FOLLOWING.
N.B ALL DRAWING MUST BE PROPERLY LABELED AND PROPERLY DIMENSION WITH
SCALE DRAWN IN.
In this section candidates are required to do their written pieces in the form of research, assignment pieces are
expected to be typed and will be a part of their portfolio for their final SBA assignment.
Assignment should be typed in Times New Romans, Font Size (12), ingle line spacing and printed for
submission.
N.B. COMPLETED ASSINGNMENT SHOULD INCLUDE A TABLE OF CONTENTS AND A REFRENCE
LIST.
Assignment pieces are list as follows:
Assignment #1 Hazards and hazardous substances
Assignment #2 Drawing tools and equipments
Assignment #3 Fire and fire fighting equipment
Assignment #4 lines, conventions and codes
Assignment #5 Site visit and site report
Assignment #1
1. Define the term hazard?
a. What is meant by the term hazardous substance?
b. List five (5) types of hazards that could be associated to the Drawing Room/lab.
2. Design/print at least five (5) hazard signs that you might see in a Technical Drawing room/lab and by
extension a Mechanical, Electrical or Building and Furniture lab.
3. What is Material Safety Data Sheet?
a. What information is on the MSDS?
b. Why is MSDS important?
c. Include a sample of the MSDS that would be appropriate to any one of the three (3) labs of
Industrial Technology; Mechanical Engineering Technology, Electrical & Electronics Technology
or Building and Furniture Technology.
4. What precautions must be taken when storing materials and supplies safely in the lab?
5. Complete a accident report from a possible accident that has acquired in the Technical Drawing Lab.
Assignment #2
1. List at least seven (7) tools and equipment that are used in the Technical Drawing lab?
2. Tell how doing Technical Drawing in a modern lab using computer is different from the traditional
method?
3. Briefly describe how we can care for our tools and equipment used in Technical Drawing.
4. Briefly describe what is required to run and operate a modern day Technical drawing lab?
Assignment #3
1. State what the four (4) different class of fire A, B, C & D are and how they are caused?
2. List five (5) fire fighting equipment that are used in fighting fire and the proper approach in fighting
each class?
Assignment #4
1. List and describe the different type of lines that are used in Technical drawing (use of pictures must be
accompanied with each type of lines).
2. State the different type of lines that are used with different types of drawings in Technical Drawing? Eg.
Must be shown
3. What is meant by the term line convention and code?
4. What is the correct way to do lettering & numbering in Technical Drawing?
5. What is the correct way to do dimension and dimensioning for drawings in Technical Drawing?
6. State the different types of dimensioning used in Technical Drawing?
Assignment #5
Students will be required to conduct a site visit and make the following report:
1. Site report
2. Accident report
3. Identify possible hazard on the site if any and make proper precaution measures in eliminating the
hazard.
TECHNICAL DRAWING S.B.A
SECTION 2A
PLANE GEOMETRY
2019/2020
SECTION 2B
SOLID GEOMETRY