Professional Documents
Culture Documents
DBXLH
DBXLH--6565B
6565B--VTM | DBXLH
DBXLH--6565B
6565B--A2M
4-port sector antenna, 2x 824–960 and 2x 1710–2180 MHz, 65° HPBW, RET compatible
l Interleaved dipole technology providing for attractive, low wind load mechanical
package
Electrical Specifications
Frequency Band, MHz 824–896 870–960 1710–1880 1850–1990 1920–2180
Gain, dBi 15.0 16.2 18.0 18.2 18.3
Beamwidth, Horizontal, degrees 71 68 69 64 58
Beamwidth, Vertical, degrees 11.0 10.6 4.9 4.6 4.4
Beam Tilt, degrees 0–10 0–10 0–6 0–6 0–6
USLS (First Lobe), dB 16 15 15 15 15
Front-to-Back Ratio at 180°, dB 30 30 32 32 32
CPR at Boresight, dB 23 21 21 18 16
CPR at Sector, dB 15 11 12 9 7
Isolation, dB 30 30 30 30 30
Isolation, Intersystem, dB 30 30 30 30 30
VSWR | Return Loss, dB 1.4 | 15.6 1.5 | 14.0 1.5 | 14.0 1.4 | 15.6 1.5 | 14.0
PIM, 3rd Order, 2 x 20 W, dBc -150 -150 -150 -150 -150
Input Power per Port, maximum, watts 350 350 350 350 350
Polarization ±45° ±45° ±45° ±45° ±45°
Impedance 50 ohm 50 ohm 50 ohm 50 ohm 50 ohm
Gain by Beam Tilt, average, dBi 5 ° | 15.3 5 ° | 15.8 3 ° | 18.0 3 ° | 17.9 3 ° | 18.2
10 ° | 15.2 10 ° | 15.7 6 ° | 17.9 6 ° | 17.7 6 ° | 17.8
* CommScope® supports NGMN recommendations on Base Station Antenna Standards (BASTA). To learn more about the benefits of BASTA,
download the whitepaper Time to Raise the Bar on BSAs.
Array Layout
©2017 CommScope, Inc. All rights reserved. All trademarks identified by ® or ™ are registered trademarks, respectively, of CommScope. page 1 of 5
All specifications are subject to change without notice. See www.commscope.com for the most current information. Revised: June 26, 2017 July 11, 2017
Product Specifications
DBXLH
DBXLH--6565B
6565B--VTM | DBXLH
VTM | DBXLH--6565B
6565B--A2M
Port Configuration
General Specifications
Operating Frequency Band 1710 – 2180 MHz | 824 – 960 MHz
Antenna Type Sector
Band Multiband
Performance Note Outdoor usage
Mechanical Specifications
RF Connector Quantity, total 4
RF Connector Quantity, low band 2
RF Connector Quantity, high band 2
©2017 CommScope, Inc. All rights reserved. All trademarks identified by ® or ™ are registered trademarks, respectively, of CommScope. page 2 of 5
All specifications are subject to change without notice. See www.commscope.com for the most current information. Revised: June 26, 2017 July 11, 2017
Product Specifications
DBXLH
DBXLH--6565B
6565B--VTM | DBXLH
VTM | DBXLH--6565B
6565B--A2M
Dimensions
Length 1937.0 mm | 76.3 in
Width 269.0 mm | 10.6 in
Depth 132.0 mm | 5.2 in
Net Weight, without mounting kit 19.0 kg | 41.9 lb
Packed Dimensions
Length 2250.0 mm | 88.6 in
Width 376.0 mm | 14.8 in
Depth 267.0 mm | 10.5 in
Shipping Weight 27.6 kg | 60.9 lb
Regulatory Compliance/Certifications
Agency Classification
RoHS 2011/65/EU Compliant by Exemption
China RoHS SJ/T 11364-2006 Above Maximum Concentration Value (MCV)
ISO 9001:2008 Designed, manufactured and/or distributed under this quality management system
Included Products
600899A-2 — Downtilt Mounting Kit for 2.4 - 4.5 in (60 - 115 mm) OD round members. Kit contains one scissor top bracket
set and one bottom bracket set.
* Footnotes
©2017 CommScope, Inc. All rights reserved. All trademarks identified by ® or ™ are registered trademarks, respectively, of CommScope. page 3 of 5
All specifications are subject to change without notice. See www.commscope.com for the most current information. Revised: June 26, 2017 July 11, 2017
Product Specifications
DBXLH
DBXLH--6565B
6565B--VTM | DBXLH
VTM | DBXLH--6565B
6565B--A2M
©2017 CommScope, Inc. All rights reserved. All trademarks identified by ® or ™ are registered trademarks, respectively, of CommScope. page 4 of 5
All specifications are subject to change without notice. See www.commscope.com for the most current information. Revised: June 26, 2017 July 11, 2017
Product Specifications
600899A
600899A--2
Downtilt Mounting Kit for 2.4 - 4.5 in (60 - 115 mm) OD round members. Kit contains one
scissor top bracket set and one bottom bracket set.
General Specifications
Mount Type Downtilt mounts
Application Outdoor
Includes Brackets | Hardware
Package Quantity 1
Mechanical Specifications
Color Silver
Material Type Galvanized steel
Dimensions
Compatible Diameter, maximum 114.3 mm | 4.5 in
Compatible Diameter, minimum 61.0 mm | 2.4 in
Net Weight 3.9 kg | 8.5 lb
Regulatory Compliance/Certifications
Agency Classification
RoHS 2011/65/EU Compliant by Exemption
China RoHS SJ/T 11364-2006 Above Maximum Concentration Value (MCV)
ISO 9001:2008 Designed, manufactured and/or distributed under this quality management system
©2017 CommScope, Inc. All rights reserved. All trademarks identified by ® or ™ are registered trademarks, respectively, of CommScope. page 5 of 5
All specifications are subject to change without notice. See www.commscope.com for the most current information. Revised: April 25, 2017 July 11, 2017