Professional Documents
Culture Documents
VAMP 300F and 300M NRJED113425EN 05 2017 Lores Web PDF
VAMP 300F and 300M NRJED113425EN 05 2017 Lores Web PDF
m.vamp.fi
VAMP RANGE // VAMP 300F and 300M PROTECTION RELAYS www.schneider-electric.com/vamp-protection 2
• VAMP 300F has all necessary feeder protection for • Pre-selectable amount of DI / DO output
industrial and utility applications for power distribution combinations up to i.e. 40 DI or 22 DO
networks. Synchrochec and auto-reclosing extend • Integrated arc flash protection for faster trip
in case of cable termination faults
automatic network control
• Bay mimic and control for quick detection of
• VAMP 300F can be equipped with optical or RS232
power process status
communication card to enable line differential and
• Proven Vamp’s flexible and simple to use
distance protection.
solution
• VAMP 300M is designed for small and medium sized
• User friendly multilingual HMI for customised
motors up-to 10 MW. External RTD module increases messaging
motor status information
• Free of cost VAMPSET configuration and
• Both models have optional interface for connection of setting tool with USB connection
2, 4 or 6 arc flash point sensors or 1 fibre loop and 4 • Text pocket for customised alarm legend
arc flash point sensors indications
• Two alternative display options
128 x 128 LCD matrix
128 x 128 LCD matrix (detachable)
• Power quality measurements and disturbance
recorder enable capture of quick network phenomena
• Wide range of communication protocols i.e. IEC61850,
Profibus DP to Modbus TCP to name the most
important ones.
VAMP RANGE // VAMP 300F and 300M PROTECTION RELAYS www.schneider-electric.com/vamp-protection 4
occurs.
C = 3L+4U+2Io (5+1A)
Protection D = 3L+4U+2Io (1+0.2A)
Protection functions
Coming now, feeder and motor protection Feeder Motor
Arc protection (option)
include necessary protection functions
and modern control features for basic and Phase overcurrent (50/51)
demanding applications. Directional phase overcurrent (67)
SOTF Switch on to fault (50 HS)
Line differential (87L)
Distance (21)
Cold load pick-up
Thermal overload (49)
Earth fault (50N/51N)
Directional earth fault (67N)
Intermittent earth fault (67N-IEF)
Undervoltage (27)
Overvoltage (59)
Neutral voltage (59N)
Phase undercurrent (37)
Unbalance (46)
Phase sequence (47)
Directional power (32)
Excessive starts (48)
Successive starts (66)
Locked rotor (51LR) , by application
Stall protection 48
Magnetising inrush (68F2)
Over excitation 68F5
Frequency (81H/81L)
Synchrocheck (25)
The optional integrated arc Rate of change of frequency (81R)
Capacitor bank unbalance 46C
protection provides new
Capacitor overvoltage
dimension to protection
Recloser (79)
scheme.
Breaker failure (50BF)
Programmable stage 1-8 (99)
VAMP RANGE // VAMP 300F and 300M PROTECTION RELAYS www.schneider-electric.com/vamp-protection 6
F1 / F2 buttons
Another way to control circuit breaker or
isolators is to program Function button F1 and
F2 to execute the control command. Once
programmed F1 could be the close and F2 open
operand. A dedicated info view appears on the
HMI requesting confirmation or de-selection of
the action.
VAMP RANGE // VAMP 300F and 300M PROTECTION RELAYS www.schneider-electric.com/vamp-protection 7
VAMPSET
Setting and Confi guration Tool
The phase sequences for currents and voltages can be read on-line
from the clear and explicit phasor diagram screen for easy
commissioning of the relay .
VAMP RANGE // VAMP 300F and 300M PROTECTION RELAYS www.schneider-electric.com/vamp-protection 8
Cable
L> (CB, BB)
CB V300F
BB
CB CB
Cable Cable
V300F V300F
Communication
VAMP is a communication expert with a wide VAMP 300 IED and the VAMPSET tool provide
experience in interfacing with different system access to practically any power system
integrators’ and SCADA suppliers’ RTUs, PLCs, information you may need.
gateways etc. using many different protocols.
Flexible adaptation of the communication
protocols together with powerful and easy to
use software tools are the key of successful
integration.
IEC 61850
The IEC 61850 protocol can be used to read
or write static data or to receive events sent
spontaneously from the relay. In addition, the
interface allows peer-to-peer communication
between the relays, called GOOSE
communication. The IEC 61850 interface is
confi gured with familiar, user-friendly VAMPSET
software.
The IEC 61850 datamodel, data-sets, report
control blocks and the GOOSE communication
are confi gured according to the requirements of
the system confi guration. VAMPSET is also used
to produce ICD fi les, which may be needed for
the substation RTU confi guration
Communication matrix
External I/O: Modbus
Profibus DP
Ethernet IP
IEC-61850
DeviceNet
DNP 3.0
IEC-103
IEC-101
SpaBus
GetSet
None
RS-232
RS-485
External modules
Ethernet
Profibus
Serial fiber
Devive Net
Profibus
RS-485
VAMP RANGE // VAMP 300F and 300M PROTECTION RELAYS www.schneider-electric.com/vamp-protection 10
Connections
Connection examples
Voltage measuring mode: 3LN + Uo
Voltages measured by UL1, UL2, UL3, Uo
Slot 8
8/C1 : 1...12
VTs
8/D1 : 1...12
Values calculated UL12, UL23, UL31,
1 IL1 (S1)
2 IL1 (S2) U1, U2, U2/U1, f
3 IL2 (S1)
4
5
IL2
IL3
(S2)
(S1) Measurements available All
6 IL3 (S2)
7 I01 (S1) Protection functions All except
8 I01 (S2)
9 I02 (S1) available synchrocheck
10 I02 (S2)
11 U4 Uo (da)
12 U4 Uo (dn)
Voltage measuring mode: 3LN
Voltages measured by UL1, UL2, UL3
VTs
Values calculated UL12, UL23, UL31,
U1, U2, U2/U1, f, Uo
8C2 : 1...6
8D2 : 1...6
Measurements available All
Protection functions All except
available intermittent e/f and
1 UL1 (a)
2 UL1 (n) synchrocheck
3 UL2 (a)
4 UL2 (n) Above measuring modes are typically used for
5 UL3 (a)
6 UL3 (n) feeder and motor protection schemes.
3LN_Uo 3LN connection is similar to 3LN+Uo. Open delta
connection is missing in this mode but Uo is
calculated.
3LN_LNy
VAMP RANGE // VAMP 300F and 300M PROTECTION RELAYS www.schneider-electric.com/vamp-protection 12
Programmable stages
There are eight programmable stages available level. For example, if four stages of frequency
to use with various applications. Each stage are not enough, with programmable stages, the
can monitor any analogue (measured or maximum of 12 can be reached. Other examples
calculated) signal and issue start and trip signals. are using the stages to issue an alarm when there
Programmable stages extend the protection are a lot of harmonics (THD) or indicating reverse
functionality of the manager series to a new power condition
Mounting options
Panel mounting
The conventional mounting technique has
always been installing the IED on the secondary
compartment’s door. Limitation in this approach
could be that the door construction is not strong
enough for the IED’s weight and suitability
to wire large amount of secondary and
communication cabling could be challenging.
Projection mounting
In case the depth dimension behind the
compartment door is limited, the IED can be
equipped with frame around the collar. This
arrangement reduces depth inside compartment
by 45 mm.
more flexibility
This mounting technique allows door being
lighter as the relays frame is installed in the back
of the secondary compartment. Communication,
DI and DO cabling cabling is easier, too, as the
door movement does not need to be considered.
In this case, only the communication between
IED base and display has to be wired.
0
Vamp 30
OK
F2
F1
I O
Dimensional drawings
225
2 8.86
1 mm
in
p 300
152
Vamp 321
5.98
Vam
Vam p 300
Vamp 321
ON
ON
ON
ON
OK
F2
OK OK
F1 F2
F2 OK
vamp F1
F1 F2
I O 1.0 F1
vamp
0.0-60 I O
4-2
.3 6
3a
3a
Panel mounting
VAMP 300 PANEL MOUNTING Projection mounting
VAMP 300 PROJECTION MOUNTING 225
2 8.86
CLICK ! 1
269
Vam p 300
Vamp 321 mm 10.59
ON
ON in 224
3b 3c 8.82
OK
F2
OK
F1
F2
vamp
F1
152
Panel mounting VAM
I O
2.5Nm 3Nm
ON
172 5.98 Vamp 300
F2
5.98 ON
ON
F1
O
VAMP 300 PROJECTION MOUNTING
I
225
OK
mm 2
F2
1.0
230 269 8.86
F1
0.0-60
O
in OK I
270 9.05 10.59 1 4-2
OK
183
F2
F2
45 F1
.3
10.63 6
VAMP 300 PANEL MOUNTING
O
O
F1
7.20 224 269
I
I
137 mm 1.77
8.82 10.59
5.39 224 in
VAMP 300 PROJECTION MOUNTING 225
2
Vamp300
321
8.82
Vamp
3
ON
vamp
8.82 6.77 3a
ON
152
OK
Vamp 300
F2
5.98
ON
F1
I O ON
ON OK
152 F2
1.0
172 5.98
F1
0.0-60
OK
OK Vamp 300 I O
6.77
F2
F1
F2
4-2
.3
OK
O F1
I 6
ON
152
F2
Vamp 300 I O
1
ON
F1
O
I 5.98 CLICK !
210
ON
8.2
F2
OK
10.6 lb-in 4.4-5.3 lb-in 1.0 T max. 1.2N•mF1
T max. 0.5-0.6N•m
3 0.0-60 I O ON ON
10.6Ø
lb-in 4.4-5.3 lb-in
F2
O
F1
F2 3b 4-3c
I F1 2.3
VAMP 300 PROJECTIONI MOUNTING
O
3a
6
225 0.2
OK
2 8.86
OK
F2
1
F1
I O
F1
I O
10.6 lb-in 4.4-5.3 lb-in I O 3a
9
2.5N•m
26 3N•m T max. 1.2N•m T max. 0.5-0.6N•m
2.5N•m
22 lb-in
3N•m
27 lb-in
3 mm 1022
.59lb-in 27 lb-in
4 10.6 lb-in 4.4-5.3 lb-in mm
in 224
8.82 3a 100
in
mm
in 230 3.94
mm
1 *
3a 270 9.05
in 183 45
270
10.63 152 7.20 210
ON
ON
152 Vamp 300
Vamp 300
0.2
OK
*
ON
5.98 3b 3c
F2
ON
Vamp 300 F1 ON
ON
I O
ON OK
OK
150 1.0-
OK
CLICK !
F2 F1
6 O F2
mm 10.6 lb.in
T max. 1.2N•m T max. 0.5-0.6N•m
OK
F1
*
2.5N•m in 3N•m
22 lb-in 27 lb-in 2.5N•m 3N•m 3a270 183 9.05
45
270 22 lb-in 27 lb-in 10.63
10.63 7.20 1.77
138
mm 3a 5.43
mm in Vamp 300
230
*
Vamp 300
in
* 3
ON
270
ON
270 183 9.05 20
10.63 45
10.63
176 176 7.20
138 150 1.77 Projection for 3000.79
series 1810
6.93 6.93 5.91 7.0
OK OK
5.43
Vamp 300
I O F1 F2
Vamp 300
F2 T max. 1.2Nm T max. 0.5 -
*
I O F1
ON ON
CLICK ! Ø7
10.6 lb.in 4.4 .- 5.3 lb.i
176 176 Projection for 300 series
Vamp 300
0.28
150
6.93 ON
6.93
ON
OK
3b 5.91 3c
OK
F2
I O F1
F2
OK I O F1 OK
F2 F2
F1
F1
O I O
I
3
2.5N•m 3N•m
2.5N•m 3N•m 22 lb-in 27 lb-in
22 lb-in 27 lb-in
180 180
mm
7.09 7.09
in 230
mm
in
270
10.63
270
10.63
183
7.20
138
9.05
* 45
1.77
Ø7
0.28
5.43
Vamp 300
*
Vamp 300 ON
ON
247
mm 9.72
in 198 180
7.80 19 7.09
0.75
Vamp 300
199
ON
150 7.83
180
5.91
Panel mounting VAMP 300 system 7.09
OK
2014-5-21 F1
F2
O
Grafimer / K. Kimpimäki I
247 270 26
9.72 10.63 1.02
mm
in 198 180 1 210 Vamp 300
0.75 Ø5 176
0.2 6.93
Panel mounting VAMP 300 system Vamp 300
199 2014-5-21
I O F1
OK
F2
Grafimer / K. Kimpimäki
with detachable display
ON
150 7.83
180 mm
5.91 in
7.09 M4x20
OK
F2
100
247 Torx T-20
F1
2
O
I
3.94
mm 9.72 1.5Nm
in 198 180 18
7.80 19 7.09 0.71
0.75 270 26
10.63 1.02 11.5
1 210
Vamp 300
199 Vamp 300
20 34
0.45
8.27 150
ON
7.83 ON
0.79 1.34
Ø 5Wall mounting with detachable HMI
5.91 176 180
Vamp 300
7.09
OK
0.2 O
F1
F2
6.93 T max. 1.2Nm T max. 0.5 - 0.6Nm
I
OK
10.6 lb.in 4.4 .- 5.3 lb.in ON
F2
I O F1
mm
OK
F2
in 270 26
M4x20
F1
I O
100 10.63 1.02
Torx T-20
1
3.94
210 1.5Nm 2 Vamp 300 3
8.27 180
18
ON
Ø5 176 7.09
0.71
0.2 6.93
MP 300 system 11.5
2014-5-21 OK
Ø7
0.28
Grafimer / K. Kimpimäki
lay
F2
I O F1
0.45
20 34 min. 2.5mm2
mm Ø 5-8mm
in 0.79 1.34
100 M4x20
Torx T-20 247
2
Vamp 300
3.94 T max. 1.2Nm T max. 0.5 - 0.6Nm
1.5Nm 9.72
mm
10.6 lb.in 4.4 .- 5.3 lb.in
18
ON
180
in 198 0.71
180 7.09
7.80 19 7.09 OK
Nut M5 1.5Nm
0.75
11.5 F1
F2
O
0.45 I
20 34
Vamp 300
Ø7
F2
F1
I O
0.28
247 OK
F2
mm 9.72
min. 2.5mm 2
I O
F1
Ø 5-8mm
in 198 180
3 19 270 7.09 26
7.80
180 0.75 10.63 1.02
180 7.09
0 7.09 Vamp 300
27
Vamp 300
Ø7 199 ON
Nut M5 1.5Nm
0.28 7.83
150 176
5.91 6.93 180 min. 2.5mm2
7.09
OK
F1
F2
Ø 5-8mm OK
F2
I O F1
180
7.09 M4x20 270 26
0
Torx T-2 Nut M5 1.5Nm
18 Vamp 300
0.71
ON
176
11.5 6.93
0.45 OK
F2
I O
34
F1
20
0.79 1.34
M4x20 Vamp 300
18
0.71 OK
F2
F1
O
11.5 I
0.45
34
0
1.34
09
0.6Nm The VAMP 300 Series is Vamp 300
in
designed with
ON
user-friendliness
min. 2.5mm in mind. 2 OK
F2
Ø 5-8mm O
F1
Nut M5 1.5Nm
min. 2.5mm2
Ø 5-8mm
VAMP RANGE // VAMP 300F and 300M PROTECTION RELAYS www.schneider-electric.com/vamp-protection 16
Order codes
SLOT NUMBERS, see page 3
1 2 3 4 5 6 7 8 9 10
DI nominal voltage
1 = 24 Vdc/ac
2 = 110 Vdc/ac
Note: 3 = 220 Vdc/ac
(1 Cable type: VX001-x, where
A = 24Vdc/ac, WITH conformal coating
D = RS232+LC x = 1, 2 or 3 meters. Default B = 110 Vdc/ac, WITHconformal coating
(RS232 + Ethernet LC 100 Mbs) length is 2 meters. C = 220 Vdc/ac, WITH conformal coating
VAMP RANGE // VAMP 300F and 300M PROTECTION RELAYS www.schneider-electric.com/vamp-protection 17
Accessories
Note 1. Fiber lengths 1, 5, 10, 15, 20, 25, 30, 35, 40, 50, 60 or 70 m
VAMP RANGE // VAMP 300F and 300M PROTECTION RELAYS www.schneider-electric.com/vamp-protection 18
Environmental conditions
Ambient temperature, in-service -40 – +60°C
Ambient temperature, storage -40 – +70 °C
Relative humidity < 95%, no condensation allowed
Maximum operating altitude 2000 m
Degree of protection (IEC 60529) IP54 (from front when panel mounted)
Weight 3.2 kg or higher (depends of options)
Dimension (W x H x D) 270 x 176 x 230 mm
Package
Dimensions (W x H x D) 315 x 210 x 257 mm
Weight (IED, Package and Manual) 5.2 kg or higher (depends of options)
VAMP RANGE // VAMP 300F and 300M PROTECTION RELAYS www.schneider-electric.com/vamp-protection 20
Document Number NRJED113425EN © 2016 Schneider Electric. All rights reserved. 05-2017