Professional Documents
Culture Documents
USEFULL DATA
• Most of the pieces are made with a magic ring. It’s not
necessary to close every round with a slip stitch, this work is
made in rounds. When especified, do it in rows.
• Fill your amigurumi while you work.
• The size of your amigurumi will depend on the size of the
yarn and hook that you use. In this pattern I will tell you the
size of the hook I use. In my case, the final size is 13 cm.
• If you use any other yarn, use the same crochet for all the
work. That hook change that I use it is because the Pearl
cotton is thinner than the usual yarn and the change is visible.
• Asteriks means repetitions.
• Time approximated, 5 hours.
LIST OF MATERIALS
• Beige, black, blue, yellow, red and brown cotton Pearl size 8
• 2 mm, 1,25mm crochet hook
• Fiberfill
• Needle and scissors
• Stitch marker
• Safety eyes
• 1,2mm wire
ABREVIATTIONS
BPSC
Step 1: When you finish the last st of your work, work a regular sl st in the
top of your turning ch and pull on your loop so it lengthens. (Image 1)
Step 2: Take your hook out of the long loop. Insert your hook from the
back to the front in the st next to your sl st. (Image 2)
Step 3: Turn your work around and grab the long sl st loop and pull it
through. Cut your yarn tail. (Image 3)
Image 2
Image 1
Image 3
1. Mr 6sc (6)
2. *Inc* x6 (12)
3. *1sc, inc* x6 (18)
4. *1sc, inc, 1sc* x6 (24)
5. *3sc, inc* x6 (30)
6. *2sc, inc, 2sc* x6 (36)
7. *5sc, inc* x6 (42)
8. *3sc, inc, 3sc* x6 (48)
9. *7sc, inc* x6 (54)
10. 54sc (54)
11. *4sc, inc, 4sc* x6 (60)
12 to 22. 60sc (60)
23. *4sc, dec, 4sc* x6 (54)
24. 54sc (54)
25. *7sc, dec* x6 (48)
26. *3sc, dec, 3sc* x6 (42)
27. *5sc, dec* x6 (36)
28. *2sc, dec, 2sc* x6 (30)
29. *3sc, dec* x6 (24)
30. *1sc, dec, 1sc* x6 (18)
Beige
8. *15pb, dism* x2 (32)
9. 32pb (32)
10. *14pb, dism* x2 (30)
11. 30pb (30)
12. *13pb,dism* x2 (28)
13. 28pb (28)
14. *12pb, dism* x2 (26)
15. 26pb (26)
16. *11pb, dism* x2 (24)
17. 24pb (24)
1. Mr 6sc (6)
2. *2sc, inc* x2 (8)
3 to 14. 8sc (8)
1. Mr 6sc (6)
2. *1sc, inc* x3 (9)
1. Ch61
2. Second chain from hook, 60sc (60)
1. Ch13
2. Second chain from hook, 12sc (12)
Base
1. Mr 6sc (6)
2. *inc* x6 (12)
3. *1sc, inc* x6 (18)
4. *1sc, inc, 1sc* x6 (24)
5. *3sc, inc* x6 (30)
6. *2sc, inc, 2sc* x6 (36)
7. *5sc, inc* x6 (42)
8. *3sc, inc, 3sc* x6 (48)
9. *7sc, inc* x6 (54)
10. 54sc (54)
11. *4sc, inc, 4sc* x6 (60)
12 to 22. 60sc (60)
Piece 2
Piece 2 1. Mr 6sc (6)
2. *1sc, inc, 1sc* x2 (8)
3. *3sc, inc* x2 (10)
4. *2sc, inc, 2sc* x2 (12)
5. *5sc, inc* x2 (14)
6 a 7. 14sc (14)
8. *3sc, inc, 3sc* x2 (16)
9. *7sc, inc* x2 (18)
10. *4sc, inc, 4sc* x2 (20)
Piece 3
1. Mr 6sc (6)
2. *1sc, inc, 1sc* x2 (8)
3. *3sc, inc* x2 (10)
4. *2sc, inc, 2sc* x2 (12)
5. *5sc, inc* x2 (14)
6. *3sc, inc, 3sc* x2 (16)
7. *7sc, inc* x2 (18)
8. *4sc, inc, 4sc* x2 (20) Piece 3
Piece 6
1. Mr 6sc (6)
2. *1sc, inc, 1sc* x2 (8)
3. *3sc, inc* x2 (10)
4. *2sc, inc, 2sc* x2 (12)
5. *5sc, inc* x2 (14)
6. *3sc, inc, 3sc* x2 (16)
7. *7sc, inc* x2 (18)
8. *4sc, inc, 4sc* x2 (20)
9. *9sc, inc* x2 (22)
10. *5sc, inc, 5sc* x2 (24)
11. 24sc (24)
12. *5sc, dec, 5sc* x2 (22)
13. *9sc, dec* x2 (20)
14. *4sc, dec, 4sc* x2 (18)
15. *7sc, dec* x2 (16)
16. *3sc, dec, 3sc* x2 (14)
Piece 6
17. 14sc (14)
Piece 8
1. Mr 6sc (6)
2. *1sc, inc, 1sc* x2 (8)
3. *3sc, inc* x2 (10)
4. *2sc, inc, 2sc* x2 (12)
5. *5sc, inc* x2 (14)
6. *6sc, 3sc in same stitch* x2 (18)
7. 16sc, inc, 1sc (19)
8. 7sc, inc, 9sc, inc, 1sc (21)
9. 7sc, inc, 10sc, inc, 2sc (23)
10. 23sc (23)
Piece 8
Pieces 9 and 10
1. Mr 6sc (6)
2. *1sc, inc, 1sc* x2 (8)
3. *3sc, inc* x2 (10)
4. *2sc, inc, 2sc* x2 (12)
5. *5sc, inc* x2 (14)
6. *6sc, 3sc in same stitch* x2 (18)
7. 16sc, inc, 1sc (19)
8. 7sc, inc, 9sc, inc, 1sc (21)
9. 7sc, inc, 10sc, inc, 2sc (23)
10. 23sc (23)
11. 8sc, inc, 11sc, inc, 2sc (25)
Lump 3 x2
1. Mr 6sc (6)
2. *inc* x6 (12)
3. *1sc, inc* x6 (18)
4. *1sc, inc, 1sc* x6 (24)
5 to 6. 24sc (24)
7. *3sc, inc* x6 (30)
8 to 10. 30sc (30)
Finish off and leave a long tail to
sew.
Copyright © 2018 Loveandfire (Lorena Flores). All rights reserved.
POWER POLE (RED)
Cut a wire of a size of 10 cm and roll red
yarn around it.
TAIL (BROWN)
Cut a piece of wire, size 7 cm and roll
brown yarn around it. You can do a
crochet piece if you want, in my case with
such a small piece I have preferred
making it that way.
The pieces, 10, 9 and 8 go in the right part of the head (if you look at it
from the front) one next to other one.
Sew the logo to Goku´s vest and embroider the symbol. Put the
tail on the back and fold it a little.
You can paint the cloud with an orange chalk to make shadows.
https://www.facebook.com/loveandfirelf/
@loveandfirelf