Professional Documents
Culture Documents
BMD Class Test 2
BMD Class Test 2
1. Definethe following
4. The principal stress induced at a point in a machine component made of steel 50C4 (
2 2
σ yt = 460 N /mm ¿ are as follows: σ 1 =200 N /mm σ 2=150 N /mm ,σ 3=0. Calculate the
2
factor of safety by (i) Maximum distortion energy theory. (ii) Maximum Shear stress
theory
5. Solid shaft has a radius of 0.5cm and made of steel having yield stress of
σ y =360 N /mm2. Determine if the loading of 15kN (compressive) causes the shaft to fail
according to the maximum shear stress theory and the maximum distortion energy theory.
A torque of 3.25 kN-cm is acted on the shaft.
6. Calculate the tolerance, fundamental deviations and limit of sizes for the shaft designated
as 25 H8/d9. Fundamental deviation for shaft is −16 D0.44